Zum Inhalt springen

English:Solubility, solutions and recovering dissolved substances - Chemistry Year 5

Aus MOOCsWiki Staging
aiMOOC-Siegel aiMOOC

Solubility, solutions and recovering dissolved substances - Chemistry Year 5

QR-Code



Introduction

Close view of several pale angular salt crystals against a darker background
Sodium chloride crystals, photograph by Stanislav.nevyhosteny, CC BY-SA 4.0, unchanged. These visible crystals each contain enormous numbers of particles; the photograph does not show individual ions.

If salt seems to disappear in water, is it really gone? Learn the names solute, solvent and solution, explain a simple particle model, and plan recovery of a dissolved solid without boiling anything.

First retrieve three ideas from the properties course: What distinguishes dissolving from melting? Does a clear liquid have to be pure water? Can a short observation tell us exactly how much will dissolve? Keep your first answers and check them after the lesson. This editorial chemistry strand supports England Year 5 integrated science; the simple particle explanation is a supporting model, not a claim that this course completes later chemistry. Use supplied evidence or teacher-approved practical work.


Name the parts of a solution and describe the evidence

In a salt-and-water example, the salt is the solute: the substance being dissolved. Water is the solvent: the substance doing the dissolving. The resulting evenly mixed liquid is the solution. A solution contains both solute and solvent. Here we study a solid dissolving in a liquid; this is not a claim that every possible solution has those physical states.

When a small amount of salt dissolves in enough water, visible crystals become smaller and may no longer be seen. The salt is still present in the solution. It has not become water, been destroyed or escaped just because it cannot be seen. Dissolving differs from melting: a solid can melt to become a liquid when conditions change, while dissolving involves a solute mixing into a solvent. Salt can dissolve in room-temperature water without being heated to its melting point.

A soluble substance can dissolve in the named solvent under the stated conditions. Solubility describes how much can dissolve, not how quickly the first visible grains disappear. The amount of solvent and its temperature matter. Stirring can help a sample dissolve faster, but does not mean that unlimited salt will dissolve. If enough solute is added, some may remain after mixing because the solution has reached its dissolving limit under those conditions.

Compare two small approved samples, such as salt and sand, using a teacher's demonstration or supplied records. Use the same water volume, temperature, sample amount and mixing time for an initial comparison. Record visible grains, cloudiness and any settled material. If salt forms a clear solution while sand grains remain, the observations support different dissolving behaviour in that test. A short wait alone does not establish that a substance could never dissolve in any solvent or temperature.

Clear means a view through the liquid is not obscured by visible suspended material. Clear does not necessarily mean colourless, pure or safe to drink. A clear salt solution differs from pure water even though you may not identify it by looking. Never taste an experimental liquid to find out what it contains. Its label and known preparation are more reliable evidence than guessing from appearance.

Use the learning junction vocabulary film to connect the three names with the salt-and-water example. Then explain the roles without the picture: salt before mixing is the solute, water is the solvent and the combined dissolved mixture is the solution. Do not describe the solution as only the salt or only the water. The written explanations provide an independent route if video playback is unavailable.

A useful record separates observation from explanation. The sentence No crystals were visible after mixing describes what was seen. The sentence Salt-derived particles are spread through the water uses a model to explain it. Neither sentence proves that the liquid is pure water, and a photograph of crystals alone does not establish a dissolving rate.


Use a limited particle model and account for mass

A model is a simplified representation used to explain or predict something. A crystal is a solid whose particles form an ordered structure. The visible salt crystals contain particles far too small to see individually in the photograph. In a sodium chloride crystal, these particles are sodium ions and chloride ions. An ion is a charged particle. During dissolving, water interacts with ions and separates them from the crystal so that they become distributed through the water. Detailed charge interactions are a later chemistry topic; they are not required for the vocabulary tasks here.

Draw two labelled boxes. In the first, use three circles and three squares in an alternating cluster to represent a tiny selection of the two salt-ion types before dissolving. In the second, spread the same three circles and three squares through a region labelled water solvent. Use a key for the two shapes. Do not remove symbols, shrink them into nothing, or draw whole visible crystals floating as though they were individual ions. Water is present throughout the second box even if you show it as a labelled background rather than drawing every water particle.

The symbol count is a teaching choice, not the actual number of ions in a crystal. The shapes and gaps are not to scale, and a static drawing cannot show all motion or attractions. Check the drawing against a sentence: The salt-derived particles remain present and are distributed among water particles. Translate back by pointing to the same solute symbols in both boxes and identifying the solvent in the solution box.

Connect observations with a model, without confusing the two
Stage Visible record Simplified explanation
Before mixing Separate salt crystals and water Salt ions are arranged in crystals; solvent is separate
After complete dissolving No visible salt grains in a clear liquid Salt-derived ions remain distributed through the water
After water leaves by evaporation Solid crystals may form Salt ions form solid crystals as sufficient solvent is removed

Mass provides another line of evidence. In an ideal original teaching example, 20.0 g of water and 2.0 g of salt are combined without spilling or losing anything. The mass of the solution is:

20.0g+2.0g=22.0g

If the empty dish has a mass of 40.0 g and the dish with solution reads 62.0 g, subtract the dish mass:

62.0g−40.0g=22.0g

The extra mass has not vanished when visible grains disappear. These are hypothetical exact values for reasoning, not your own measurements or a prediction of a real balance's precision. Actual records need units, the same weighing boundary and sensible allowance for measurement uncertainty. Adding masses does not mean that liquid volumes must add in the same way.

When water evaporates from an open dish, the mass remaining on that balance can decrease because water has left the weighed system as vapour. Matter has moved, not been destroyed. A closed system that retains the water and its vapour would retain the total mass. State what is included before comparing readings: dish plus contents differs from salt alone. Do not use a lower open-dish reading as evidence that dissolved salt ceased to exist.


Recover dissolved salt and judge what the result shows

Evaporation is the change of liquid water into water vapour from its surface. It can happen at room temperature and does not require boiling. As enough water leaves a salt solution, solid salt can remain and crystals can form. Recovery means obtaining a substance from a mixture again. Evaporation does not create the salt from nothing, and recovering the solid does not mean the original water has also been collected.

The American Chemical Society demonstration links dissolving, a particle explanation and salt recovery. Its US fifth-grade label is the provider's context, not proof of exact equivalence to England Year 5. Compare the observable changes with your own labelled model and the text; the video is supporting evidence, not personal practical work.

For a teacher-approved room-temperature investigation, use only a small, known salt-and-water solution and a stable shallow dish suitable for the activity. Label the sample and place it in the agreed protected location away from food, electrical equipment and places where it can be knocked over. Follow the teacher's eye-protection and handling instructions. Do not taste, heat, use flames or put the dish into an appliance to speed it up. Wash hands afterwards and follow the school's clean-up arrangements. You can instead plan the method and use supplied observations if practical access is unavailable.

Record the starting appearance, known ingredients, date and conditions. Check at agreed later times, describing the liquid level and any visible solid. A shallow exposed surface allows evaporation, but completion may take a day or several days depending on conditions and amount; it is not guaranteed by a fixed lesson timer. A solid deposit while liquid remains is not proof that all the water has left.

In the ideal mass example, the fully dry dish with recovered salt reads 42.0 g. Its empty mass was 40.0 g, so the recovered solid has mass:

42.0g−40.0g=2.0g

This agrees with the original salt amount in the loss-free example. A real result may be lower after a spill or transfer loss, or higher if the solid is still wet or contaminated. Repeat an agreed observation or consult the teacher rather than inventing an exact recovery. The appearance of crystals supports recovery in a known preparation, but appearance alone does not certify purity or make the sample edible.

Shallow rectangular evaporation ponds separated by dark stone paths with small heaps of salt
Salinas del Carmen evaporation ponds, Fuerteventura, Canary Islands. H. Zell, CC BY-SA 3.0, unchanged. A real-world context for evaporation; the photograph does not supply our mass values or describe every industrial processing step.

Ordinary classroom filter paper can retain undissolved sand but allows the dissolved salt to pass with the water. Filtering a clear salt solution therefore does not normally recover its dissolved salt as a dry residue. Evaporation suits this known, stable dissolved solid. It is not a universal method for every solute or liquid: substances that evaporate, decompose or are hazardous need different expert decisions. Collecting the water as well would need a different separation arrangement; no heated apparatus is required here.

Finish with a new known example: a small colourless sugar solution. Identify solute, solvent and solution, explain why clear is not pure, and propose an appropriate supervised room-temperature recovery plan with its limits. Revisit the three opening questions without looking back, correct an earlier answer and retain an accurate diagram plus an evidence-based explanation. Practical competence requires actual learner work and suitable teacher observation or verification, not only a quiz score.


Interactive Tasks


Quiz: Test Your Knowledge

In the salt-and-water example, which term names the salt being dissolved? (Solute) (!Solvent) (!Pure water) (!The empty dish)



What is the solution after salt dissolves completely in water? (The mixture containing dissolved salt and water) (!Only the water with the salt destroyed) (!Only the dry salt left before mixing) (!The glass or plastic container)



Why is dissolving not the same as melting here? (Salt mixes into a solvent without first becoming liquid salt) (!The solid must be heated until it is liquid) (!The water has to be destroyed) (!Every dissolved substance becomes a gas immediately)



What does a clear salt solution show by appearance alone? (No visible grains obscure the view but purity is not established) (!It must be pure water) (!It must be safe to drink) (!It contains no solute particles)



What should the simple before-and-after model retain? (The same selected salt-ion symbols after they spread through the water) (!No solute symbols after dissolving) (!Larger visible crystals labelled as single ions) (!A prediction of exact real particle numbers from six symbols)



What is the solution mass in the loss-free teaching example? (22.0 g) (!20.0 g) (!2.0 g) (!62.0 g)



Why can an open dish lose mass during evaporation? (Water leaves the weighed system as vapour) (!All matter is destroyed as soon as the level falls) (!The empty dish necessarily becomes lighter) (!The salt stops existing when it dissolves)



What is an appropriate recovery approach for the known salt solution? (Allow a small labelled sample to evaporate at room temperature under teacher arrangements) (!Taste unknown liquids to identify them) (!Use mains appliances without permission to force drying) (!Assume the salt is caught by ordinary filter paper)



What is recovered salt mass when dry dish and solid are 42.0 g and the empty dish is 40.0 g? (2.0 g) (!42.0 g) (!40.0 g) (!82.0 g)



Which conclusion about a real deposit is careful? (Check known preparation wetness contamination and losses before claiming exact recovery) (!Crystals automatically prove food purity) (!A fixed timer guarantees all water has gone) (!The recovered water must be present in the dry salt)





Memory Game

Solute Substance being dissolved
Solvent Substance doing the dissolving
Solution Evenly mixed combination containing solute and solvent
Solubility How much can dissolve under specified conditions
Evaporation Liquid changing to vapour from the surface
Recovery Obtaining a substance from a mixture again
Crystal Solid with an ordered arrangement of particles
Residue Material remaining after a separation process





Drag and Drop

Salt before dissolving Solute in the salt-and-water example
Water used for dissolving Solvent in the example
Clear mixed salt water Solution containing both components
Water leaving the open dish Evaporation into the surrounding air
Dry solid left from the known salt solution Recovered material rather than newly created salt





Crossword Puzzle

SOLUTE Substance being dissolved
SOLVENT Substance doing the dissolving
SOLUTION Evenly mixed solute and solvent
SOLUBILITY Amount that can dissolve under stated conditions
RECOVERY Obtaining a substance from a mixture again
CRYSTAL Solid with an ordered arrangement of particles





LearningApps

Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.


Cloze Text

Complete the explanation.
Salt being dissolved is the

.
Water doing the dissolving is the

.
Their evenly mixed liquid is a

.
How much can dissolve concerns

.
Liquid water leaving the surface changes by

.
Obtaining salt again from the mixture is

.



Open Tasks


Easy

  1. Label the three roles - Chemistry solutions Year 5: Label solute, solvent and solution in the salt-and-water example. Explain why solution names the mixture rather than just one ingredient.
  2. Observation or explanation - Chemistry solutions Year 5: Write two observations and two particle-model explanations for dissolving. Explain why a clear liquid is not automatically pure or safe.
  3. Dissolving and melting - Chemistry solutions Year 5: Compare salt dissolving in room-temperature water with a solid melting. State what happens to the solute in the first example.
  4. Read the mass example - Chemistry solutions Year 5: Explain the 20.0 g plus 2.0 g calculation, then distinguish the solution mass from the dish-plus-solution reading. Keep units in your explanation.


Standard

  1. Draw a limited particle model - Chemistry solutions Year 5: Draw before-and-after boxes with a key for two salt-ion types and water labelled as solvent. Retain the same three circles and three squares, distributed after dissolving. Explain two limits of the model.
  2. Compare dissolving observations - Chemistry solutions Year 5: Using supplied records or teacher-approved samples, compare salt and sand with matched water amount, temperature, sample amount and mixing time. State observations and the limits of a short test.
  3. Plan room-temperature recovery - Chemistry solutions Year 5: Write a supervised small-sample method with a labelled stable dish, protected location, agreed observation times, eye-protection/handling arrangements and no tasting or heating. Identify which substance leaves and which remains.
  4. Explain a recovery record - Chemistry solutions Year 5: Use the empty, solution-containing and dry dish readings to explain 22.0 g solution and 2.0 g recovered solid. State the ideal assumptions and why actual wetness or loss can change a result.


Advanced

  1. Correct the filter proposal - Chemistry solutions Year 5: A learner plans to catch dissolved salt with ordinary classroom filter paper. Explain what normally passes through, what filtering can retain, and why room-temperature evaporation suits the known salt solution.
  2. Explain the weighing boundary - Chemistry solutions Year 5: Explain how mass can decrease on an open-dish balance without matter being destroyed. Contrast this with a closed system retaining water vapour and identify exactly what each weighing includes.
  3. Transfer to a sugar solution - Chemistry solutions Year 5: Label a known sugar solution, propose a suitable supervised recovery plan and explain why clear does not mean pure. State limits rather than claiming every substance can be recovered by the same method.
  4. Review evidence and revise - Chemistry solutions Year 5: Present the labelled model, dissolving comparison and recovery reasoning. Correct an opening answer, distinguish supplied evidence from actual work, identify one uncertainty and explain what practical verification would still be required.



Learning Check

  1. Vocabulary check - Chemistry solutions Year 5: What are the three roles in the salt-and-water example?
  2. Model check - Chemistry solutions Year 5: How should the drawing represent dissolving without inventing disappearance?
  3. Property check - Chemistry solutions Year 5: How do solubility, dissolving speed and melting differ?
  4. Mass check - Chemistry solutions Year 5: What do the ideal readings show?
  5. Method check - Chemistry solutions Year 5: How can the known dissolved salt be recovered appropriately?
  6. Limits and transfer check - Chemistry solutions Year 5: What should be concluded from a solid deposit or falling balance reading?


Worked checks and assessment guidance

  1. Salt is the solute being dissolved; water is the solvent; the resulting solution contains both. Visible crystals becoming unseen does not mean the salt becomes water or ceases to exist. Clear appearance alone proves neither purity nor safety.
  2. Retain the same selected circles and squares for the two salt-ion types, first clustered and then distributed through labelled water. Salt ions remain present among water particles. Symbols, sizes, static positions and six-particle count are explanatory choices rather than actual visible crystal structure or real particle numbers.
  3. Solubility concerns how much dissolves in a named solvent under specified conditions; speed concerns how quickly it happens. Stirring can affect speed without allowing unlimited salt to dissolve. Melting is a solid-to-liquid state change, whereas salt dissolves into room-temperature water as a mixture. A short salt/sand comparison has limited scope.
  4. 20.0 g water and 2.0 g salt give 22.0 g solution if nothing is lost. A 62.0 g dish-plus-solution reading minus the 40.0 g empty dish confirms 22.0 g contents. After complete drying, 42.0 g minus 40.0 g gives 2.0 g recovered salt. These hypothetical exact readings are not personal measurements or guaranteed real recovery.
  5. Under teacher arrangements, place a small known solution in a labelled stable shallow dish in the agreed protected location and record changes at agreed times. Use required eye protection and handling, do not taste or heat, and wash hands/clean up as directed. Water evaporates at room temperature and salt remains; ordinary filter paper does not normally catch dissolved salt. Time and complete drying depend on conditions.
  6. A known preparation and deposit support salt recovery but appearance does not certify purity; wetness, contamination or transfer loss affect mass. An open dish loses water to the air, not matter from existence, while a closed system retaining vapour retains total mass. Apply solute/solvent/solution and supervised recovery reasoning to a known sugar solution without assuming the method suits every solute or also collects the water. Actual practical skill needs verification.


Learning evidence

Retain a correctly labelled solute/solvent/solution explanation, before-and-after salt-ion model with key and limits, and an evidence-based salt/sand comparison using actual or clearly identified supplied observations. Explain all three mass calculations with units and weighing boundaries. Provide a teacher-appropriate room-temperature recovery plan, distinguish evaporation from filtering, name wetness/contamination/loss limitations and transfer reasoning to a known sugar solution. Revisit and correct an opening answer. Actual practical work and suitable verification are required for practical-skill claims.


OER and Wikipedia

DfE England Science programme, Year 5 Properties and changes of materials, dissolving and recovery; the formal particle detail is a supporting editorial extension.

American Chemical Society: Dissolving and Back Again, observations, limited ion model and room-temperature recovery. ACS Conservation of Mass: Teacher Background, distinction between a closed system and material leaving an open weighing boundary. US provider grade labels are not claimed as England year equivalence. All mass values, diagram instructions, teaching comparisons and questions in this course are newly authored rather than copied activity sheets.

Sodium chloride crystals.jpg, Stanislav.nevyhosteny, CC BY-SA 4.0. Specific original Commons file used unchanged.

Salinas del Carmen 01.jpg, H. Zell, CC BY-SA 3.0. Specific original Commons file used unchanged.

https://www.youtube.com/watch?v=8e70PlgqXmk — American Chemical Society, Chapter 1: Fifth Grade Lesson 1.3 Dissolving & Back Again. https://www.youtube.com/watch?v=i4lTvRNkRP4 — learning junction, Solute, solvent and solution | What is a Solution? | Science Video for Kids. Original publisher embeds; films are not downloaded or rehosted. Images provide observation/context rather than the hypothetical mass data. No purchase or public upload is required for the course activities.


Linked learning areas


aiMOOC Projects



Schulfach+




aiMOOCs



aiMOOC Projekte









MOOCwiki · Deutsch

Nach dem Lernen ist vor dem Lernen

Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.

Zur MOOCwiki-Hauptseite

Mediathek

Suche verfeinern

Dein Lernplan bestimmt, was oben steht. Alle anderen Inhalte bleiben erreichbar. Seitenaufrufe beeinflussen die Auswahl nicht.

Inhalte werden geladen ...

Mediathek wird aus dem Wiki geladen ...