Zum Inhalt springen

English:Energy changes and rates of chemical reaction - Science Year 10

Aus MOOCsWiki Staging
aiMOOC-Siegel aiMOOC

Energy changes and rates of chemical reaction - Science Year 10

QR-Code



Introduction

A generic exothermic profile with an activation barrier
Risibot’s A+B-to-C schematic uses arbitrary labels and no numerical energy scale. The horizontal progression axis is not time, and the lower product level is distinct from the activation barrier. C is a generic product label rather than an identification of carbon.

Interpret energy profiles and temperature evidence, check original bond and thermal ledgers, and explain rate factors through collision ideas. Work with fictional graph data rather than unsafe practical instructions. Year 10 placement is editorial; bond-energy calculations are extension where the selected route requires them.


Distinguish overall energy change, barriers and catalysts

Reaction energy change and activation energy answer different questions. An exothermic reaction transfers energy from the reacting system to its surroundings. An endothermic reaction takes in energy from the surroundings. At constant pressure in the school enthalpy account, the reaction enthalpy change is negative for exothermic and positive for endothermic change. Energy is transferred, not created by the word exothermic.

In the opening generic profile, the vertical axis represents energy and the horizontal axis reaction progression. It is not a time graph. A+B and C are arbitrary reactant/product labels in this schematic; C does not identify elemental carbon. The product level is lower than the reactant level, illustrating an exothermic change, but the image has no numerical scale from which to measure a real enthalpy value.

ΔH=Hproducts−Hreactants

Activation energy is the energy barrier from the reactant level to the relevant transition-state peak in a simple one-step profile. A reaction can release energy overall yet still have a substantial activation barrier. Do not equate a negative overall enthalpy change with an instant reaction, or claim a catalyst supplies the released energy. Whether a reaction occurs quickly depends on a suitable pathway and conditions as well as the overall change.

The following original paper profiles use arbitrary common energy references in kJ per mol of the specified model reaction. They are not values read from the opening image or measured chemical data. Each case gives unchanged reactant and product levels and a lower alternative-path peak when a catalyst is used. Check differences rather than treating the absolute vertical zero as physically required.

Case Reactant level Product level Uncatalysed peak Catalysed peak Delta H Forward Ea without catalyst Forward Ea with catalyst
P 80 30 140 105 -50 60 25
Q 20 65 110 80 45 90 60

For P, the overall change is 30 minus 80, or minus 50 kJ per mol. The forward uncatalysed barrier is 140 minus 80, or 60, falling to 105 minus 80, or 25 with the alternative path. Reverse barriers are measured from the product level: 110 without and 75 with the catalyst. It would be wrong to use the peak’s height above zero as the activation energy unless zero happened to be the reactant reference.

For Q, products are 45 kJ per mol above reactants, so it is endothermic. Its forward barriers are 90 and 60, while reverse barriers are 45 and 15. A catalyst lowers a barrier by offering an alternative pathway; it does not change the overall enthalpy difference, create extra product from nothing or change the equilibrium composition for the same reaction at the same conditions. It can help an equilibrium be reached sooner.

A catalyst participates in intermediate reaction steps but is regenerated in the overall catalytic cycle, rather than consumed in the net stoichiometric reaction. Real catalysts can nevertheless become poisoned, lost or deactivated. Biological enzymes are catalysts with condition-dependent activity. Not every substance added to a mixture is a catalyst, and not every catalyst works for every reaction.

Identify an alternative pathway and explain why the start and finish energy levels remain unchanged. Use our numerical P and Q profiles for separate forward/reverse barrier checks; the animation is not the measurement source for those invented levels. If unavailable, draw both profiles from the supplied table and annotate each difference. Original: FuseSchool - Global Education, What Are Catalysts? | Reactions | Chemistry | FuseSchool. The written explanations and native tasks work without sound or the external player.


Audit bond-energy and temperature-change calculations

Breaking bonds requires energy; making bonds releases energy. An exothermic reaction does not release energy simply because its reactant bonds are broken. In the bond-energy school method, energy needed to break selected reactant bonds is compared with energy released as product bonds form. The net estimate is energy in minus energy out. This bookkeeping is not necessarily the actual step-by-step reaction mechanism.

Consider the specified gas-phase equation CH4 + 2O2 → CO2 + 2H2O, with water represented as gas for this bond-energy estimate. Methane contributes four C-H bonds and the oxygen molecules two O=O bonds to the reactant ledger. Products contain two C=O bonds in carbon dioxide and four O-H bonds across two water molecules. A double bond is counted using its supplied double-bond energy, not two copies of the single-bond value.

A composition model supporting the methane bond inventory
Yulo1985’s molecular illustration identifies one methane, two oxygen, one carbon-dioxide and two water molecules in the specified reaction ratio. It is not a collision mechanism or energy-scale diagram. Our separate gas-phase bond-energy assumptions and supplied rounded values define the calculation.

The original ledger below supplies illustrative rounded bond-energy inputs in kJ per mol of the named bond. Use 805 specifically for C=O in carbon dioxide in this problem. Bond environments affect values, so these inputs are not an instruction to substitute one universal C=O value in every organic compound or a newly measured reference dataset.

Bond type Number broken Number formed Supplied approximate energy per mol of bonds
C-H 4 0 413
O=O 2 0 498
C=O in carbon dioxide 0 2 805
O-H 0 4 463

ΔHestimate=[4(413)+2(498)]−[2(805)+4(463)]=2648−3462=−814kJmol−1

The minus sign indicates an exothermic estimate for one mol of methane reacting in this supplied gas-phase account. Reversing the subtraction would give the wrong sign. Changing water’s state changes the relevant reaction enthalpy, so this is not a claim to have measured a standard combustion value for liquid-water products. Average bond energies and the simplified account explain why this estimate need not exactly match a measured reference enthalpy.

Now use an independent original thermal model. Suppose 50.0 g of an aqueous mixture rises from 20.0 to 26.5 degrees Celsius, and the supplied specific heat capacity is assumed to be 4.18 J per gram per degree Celsius. Assume for this ideal calculation that the reacting system’s energy transfer is captured by the mixture, with no loss to the room, no significant apparatus heat capacity and no other process.

qmixture=mcΔT=50.0(4.18)(6.5)=1358.5J≈1.4kJ

The mixture gains approximately 1.4 kJ, so the reaction transfers the opposite signed amount under those assumptions. That total transfer is not automatically minus 1.4 kJ per mol: an amount of reacted substance would be needed for a molar value. The unrounded arithmetic is retained for intermediate checks. Reporting about 1.4 kJ respects the two significant figures of the 6.5-degree difference in this school calculation; an uncertainty analysis should also consider the actual reading errors rather than claim a perfectly measured exact heat.

A falling surrounding-mixture temperature can support an endothermic interpretation under suitable controls, but heat loss, dissolution, evaporation and initial temperature differences may complicate an observation. A thermometer alone does not identify a reaction mechanism or prove every assumption. The fictional data are a paper analysis, not instructions to mix unknown chemicals, ignite fuel or improvise a calorimeter.



Interpret rate data and explain collision-based factors

Reaction rate describes how much changes per time, not simply whether a reaction is exothermic. A rate can be expressed using a suitable measured reactant decrease or product increase, with units matching the chosen quantity. The gradient of a product-volume graph gives a volume-production rate. An average interval gradient and an instantaneous tangent gradient are different estimates.

Use this original fictional gas-collection record. Time is in seconds and cumulative product-gas volume in cubic centimetres. Temperature and pressure are stipulated comparable, the gas measurement is a suitable proxy here, and no practical collection or reaction procedure is assigned. Plot the points with labelled units before interpreting a flattening curve.

Time in s Cumulative product volume in cm3
0 0
10 18
20 30
30 38
40 42
50 44
60 44

From zero to twenty seconds, the average rate is 30 divided by 20, or 1.50 cubic centimetres per second. From ten to thirty, it is (38 minus 18) divided by 20, or 1.00. From forty to sixty, it is (44 minus 42) divided by 20, or 0.100. The first ten-second interval gives 1.80, but this finite interval is not an exact instantaneous initial tangent. The unchanged fifty- and sixty-second readings show no further measured gas increase over that interval, not an instrument-independent proof that no microscopic process remains possible.

In a simple collision account, reacting particles need contact, sufficient energy and suitable orientation. Higher concentration of a reacting dissolved species generally increases collision opportunities under comparable conditions. For reacting gases, compression at fixed temperature can increase concentration and collision frequency, but changing the pressure of an unrelated gas is not automatically the same as increasing a reactant’s concentration.

Increasing temperature changes the energy distribution as well as collision frequency. A greater fraction of collisions can exceed the activation threshold, so faster movement alone is an incomplete explanation. The catalyst offers an alternative lower-barrier path rather than warming every particle. These factors do not establish a universal rule that doubling concentration or adding ten degrees must exactly double every reaction rate.

For a solid reacting at its exposed surface, smaller pieces can provide more exposed area at the same mass. As an ideal geometry comparison, one cube of side two centimetres has volume eight cubic centimetres and surface area twenty-four square centimetres. Cutting it into eight separate one-centimetre cubes gives the same total volume and forty-eight square centimetres of exposed area if all faces are accessible. This doubles the model area, not necessarily the exact real reaction rate when transport, coating or other conditions limit it.

A separate fixed-endpoint comparison reaches the same stipulated 20 cubic centimetres of product in fifty seconds for A and twenty-five seconds for B. Reciprocal times are 0.0200 and 0.0400 per second, giving relative speed two under that shared-endpoint comparison. The corresponding average volume rates are 0.400 and 0.800 cubic centimetres per second. Reciprocal time alone is not a universal absolute chemical rate and comparisons fail if endpoints or reacting quantities differ.

To investigate one factor in supplied data, keep relevant reactant amounts, temperature, surface condition and measurement method comparable where they are not the chosen variable. A steeper early curve does not automatically imply more total product. With the same limiting reactant, a catalyst may change time taken without changing the final theoretical amount. Repeat measurements, identify anomalies and consider leaks or inconsistent timing before claiming a causal effect from one pair of observations.

Original publisher: FuseSchool - Global Education, Rates of Reactions - Part 1 | Reactions | Chemistry | FuseSchool. Compare reactant-decrease and product-increase graph methods, keeping the measured system boundary explicit for escaping gas. The video’s demonstrations are observation material, not an instruction to reproduce them. If it cannot play, plot our seven supplied points and explain three interval gradients and the limits of a reciprocal-time comparison.



Interactive Tasks


Quiz: Test Your Knowledge

What does the horizontal axis of the opening profile represent? (Reaction progression rather than elapsed time) (!A stopwatch reading in seconds) (!The number of catalyst particles consumed permanently) (!A measured temperature scale in degrees Celsius)



What is the overall enthalpy change in supplied profile P? (Minus fifty kJ per mol) (!Plus sixty kJ per mol) (!Plus one hundred forty kJ per mol) (!Minus eighty kJ per mol)



What is the forward catalysed barrier for P? (Twenty-five kJ per mol) (!One hundred five kJ per mol) (!Seventy-five kJ per mol) (!Fifty kJ per mol)



Which change does a catalyst make for the same overall reaction and conditions? (It provides an alternative pathway while the overall enthalpy difference remains unchanged) (!It permanently consumes itself as the only fuel) (!It changes every product into a different element) (!It guarantees a different equilibrium composition)



Which statement about chemical bonds is correct? (Breaking bonds requires energy while forming bonds releases energy) (!Breaking bonds alone explains every exothermic energy release) (!Every bond in every molecule has exactly the same energy) (!A double bond must always use twice any single-bond value)



What is the supplied methane bond-energy estimate? (Minus eight hundred fourteen kJ per mol of methane for the stated gas-phase account) (!Plus eight hundred fourteen kJ per mol regardless of subtraction order) (!A measured liquid-water combustion enthalpy with no approximations) (!Minus one thousand three hundred fifty-eight point five kJ per mol)



What can be inferred from the fictional mixture thermal model? (It gains 1358.5 J in the ideal arithmetic, without automatically giving a molar reaction enthalpy) (!It proves the reaction gains exactly that heat in every real apparatus) (!It gives minus 1.4 kJ per mol without any reacted amount) (!It proves the thermometer identifies every reaction mechanism)



What is the average product-volume rate from ten to thirty seconds? (1.00 cubic centimetres per second) (!1.90 cubic centimetres per second) (!20.0 cubic centimetres per second) (!0.0500 cubic centimetres per second)



Why is a higher-temperature rate explanation more than particles moving faster? (The energy distribution changes so a greater fraction of collisions can exceed the barrier) (!Every collision becomes successful with no orientation requirement) (!The activation energy necessarily becomes zero) (!A ten-degree rise must double every possible reaction rate exactly)



What limits the reciprocal-time comparison? (It requires the same defined endpoint and comparable reacting quantities) (!Any two unrelated finish times identify an absolute rate in mol per second) (!A shorter time always means more final product) (!The reciprocal has units of cubic centimetres even without a volume)





Memory Game

Exothermic Transfers energy from the reacting system to surroundings
Endothermic Takes energy into the reacting system from surroundings
Activation energy The relevant barrier above the reactant energy level
Catalyst Provides an alternative pathway and is regenerated overall
Average rate Measured change divided by an interval of time
Collision theory Reaction account requiring contact, enough energy and suitable orientation





Drag and Drop

Products lie fifty energy units below reactants Identify a negative overall change rather than use the peak height
A lower pathway has unchanged reactant and product levels Identify catalysis without changing the overall enthalpy difference
A learner says broken reactant bonds release the energy Correct bond breaking as energy input and compare product bond formation
A product-volume curve becomes flatter over successive intervals Compare gradients with labelled units rather than claim a constant rate
The same fixed endpoint is reached in half the time Use a qualified twofold relative reciprocal-time comparison





Crossword Puzzle

EXOTHERMIC What change transfers energy to surroundings?
ENDOTHERMIC What change takes in energy from surroundings?
CATALYST What is regenerated overall while providing an alternative pathway?
GRADIENT What graph feature gives a rate of change?
COLLISION What contact event requires suitable energy and orientation?
BARRIER What energy obstacle separates reactants from a simple transition-state peak?





LearningApps

Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.


Cloze Text

Complete the explanation.
Exothermic change transfers energy to the

. Endothermic change has a positive overall enthalpy

. Reactant-to-peak difference is activation

. A catalyst offers an alternative

. Breaking bonds requires energy

. Forming bonds releases

. Rate can be measured as product increase per unit

. A graph’s rate is related to its

. Successful collisions require suitable

. Smaller exposed solid pieces can increase surface

.



Open Tasks


Easy

  1. Read an energy profile: Distinguish the vertical energy scale, progression axis, reactants, products and barrier.
  2. Name energy transfers: Explain exothermic and endothermic without claiming energy is created.
  3. Describe bond changes: Explain why breaking and making bonds have opposite energy-transfer accounts.
  4. Read gas data: Give units, identify increasing and flat intervals and distinguish amount from rate.


Standard

  1. Calculate both profile cases: Find overall changes and forward/reverse barriers with and without the catalyst.
  2. Audit the methane ledger: Count every broken and formed bond and apply the supplied gas-phase approximate inputs.
  3. Analyse the thermal model: Calculate temperature rise and mixture heat, then distinguish reaction sign, total heat and molar enthalpy.
  4. Calculate interval gradients: Work out three average gas-production rates and qualify the finite initial interval.


Advanced

  1. Evaluate catalyst overclaims: Discuss alternative pathways, regeneration, deactivation and why overall energy or equilibrium is not changed by a catalyst at the same conditions.
  2. Link geometry and rate limits: Derive the separate-cube exposed-area comparison and explain why its ratio is not automatically the real rate ratio.
  3. Audit the fixed endpoint: Calculate reciprocal times and average volume rates, with the assumptions needed for a valid relative comparison.
  4. Design a data-based comparison: Identify controlled conditions, repeated measurements, possible leaks or timing errors and limits to causal claims from one pair.



Learning Check

  1. Profiles and barriers: Take differences from the correct reference levels.
  2. Catalysis and reaction speed: Separate the path, overall change and final amount.
  3. Bond-energy estimate: Count bonds in the stated reaction ratio and retain state assumptions.
  4. Temperature evidence: Separate mixture heat from reaction heat and molar quantities.
  5. Gas gradients and endpoint speed: Use changes over matching time intervals and keep units.
  6. Collision and surface reasoning: Explain factors without inventing universal multipliers.


Worked checks and assessment guidance

  1. P has overall change minus fifty, forward uncatalysed barrier sixty and catalysed barrier twenty-five kJ per mol; reverse barriers are one hundred ten and seventy-five. Q has overall plus forty-five, forward ninety and sixty, and reverse forty-five and fifteen. The absolute arbitrary zero is not the reactant level by necessity. The opening generic graph gives no numerical scale and progression is not elapsed time.
  2. A catalyst offers a lower-barrier alternative pathway and is regenerated in the net reaction, although real catalysts can deactivate. It does not change the overall enthalpy difference or the equilibrium composition at unchanged conditions. A reaction can be exothermic yet slow through a substantial barrier. A catalyst can change the time to a given amount without increasing the theoretical product from the same limiting reactant.
  3. Four C-H and two O=O bonds contribute input 4 times 413 plus 2 times 498 equals 2648 kJ per mol methane. Two C=O in carbon dioxide and four O-H contribute release 2 times 805 plus 4 times 463 equals 3462. Input minus release gives minus 814. This is an approximate gas-phase calculation with the given rounded inputs, not a measured standard liquid-water combustion value or a literal stepwise mechanism.
  4. The stipulated rise is 6.5 degrees Celsius. Fifty grams times 4.18 J per gram per degree times 6.5 gives 1358.5 J, about 1.4 kJ at the stated two-significant-figure temperature difference, gained by the mixture. The reaction transfer is opposite in sign under ideal assumptions, but no molar value follows without reacted amount. Heat losses, apparatus capacity and input uncertainty are not certified by the fictional readings.
  5. Average volume rates are 1.50 cubic centimetres per second from zero to twenty, 1.00 from ten to thirty and 0.100 from forty to sixty. The first ten-second average is 1.80, not an exact instantaneous initial tangent. A common twenty-cubic-centimetre endpoint at fifty versus twenty-five seconds gives reciprocal times 0.0200 and 0.0400 per second and average volume rates 0.400 and 0.800. B is twofold faster only under that shared comparison.
  6. Concentration can change collision opportunities; temperature also changes the fraction with enough energy, and orientation matters. An alternative catalyst path reduces the relevant barrier. One two-centimetre cube has volume eight and area twenty-four; eight separate one-centimetre cubes retain volume eight and expose area forty-eight if all faces are accessible. Area doubles without proving every real rate doubles. Compare controlled data and repeat before assigning causation or claiming more final product from a steeper early curve.


Learning evidence

Retain both original profile ledgers, a complete supplied-input bond-energy calculation, qualified thermal accounting, plotted fictional gas data, interval gradients, reciprocal-time assumptions and an exposed-area comparison. Distinguish model estimates from actual measurements and reaction energy from speed; no real experiment or independent expert certification is claimed.


OER and Wikipedia

Original numerical profiles, illustrative rounded bond-input ledger, fictional thermal and gas records, fixed-endpoint comparison, geometry calculations and tasks. No source worksheet or experimental protocol is reproduced. Both unchanged Commons originals and both original publisher previews were actually viewed, with creator, licence, byte and native-image checks.

DfE GCSE combined science, energy changes and reaction-rate scope, with bond-energy extension where the selected route requires it. Concept references: OpenStax Chemistry 2e collision theory, catalysis and bond energetics. The supplied numerical cases and educational wording are original and are not presented as new empirical reference measurements. Sources checked 13 November 2026.

Activation Energy.svg, Risibot, CC BY-SA 4.0. Unchanged original; caption and learning activities are original.

Methane-combustion.svg, Yulo1985, CC BY-SA 4.0. Unchanged original; caption and learning activities are original.

Additional original video: Rates of Reactions - Part 1 | Reactions | Chemistry | FuseSchool, FuseSchool - Global Education; native publisher embedding.


Linked learning areas


aiMOOC Projects



Schulfach+




aiMOOCs



aiMOOC Projekte









MOOCwiki · Deutsch

Nach dem Lernen ist vor dem Lernen

Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.

Zur MOOCwiki-Hauptseite

Mediathek

Suche verfeinern

Dein Lernplan bestimmt, was oben steht. Alle anderen Inhalte bleiben erreichbar. Seitenaufrufe beeinflussen die Auswahl nicht.

Inhalte werden geladen ...

Mediathek wird aus dem Wiki geladen ...