English:Electrolysis of molten and aqueous ionic compounds - Chemistry Year 10
Introduction
Why can a molten salt give a metal while its aqueous solution gives hydrogen? Trace charge carriers, explain reactions at each electrode and predict products only after identifying the electrolyte and electrode material.
Retrieve ion charge and electron-transfer ideas from Chemical changes, acids, salts and reactivity - Science Year 10. This course adds detailed molten/aqueous comparisons and electrode accounting. Year 10 is an editorial GCSE allocation; writing half-equations is a higher-tier extension. Use diagrams and supplied records, not a home electrolysis experiment: hot melts, corrosive solutions, toxic gases and reactive products require separately approved professional supervision.
Trace mobile ions and electron exchange at electrodes
Electrolysis uses an external direct-current supply to drive chemical change at electrodes in an electrolyte. An electrolyte contains mobile ions that carry charge through the liquid. For the simple ionic compounds considered here, melting or dissolving releases the ions from fixed lattice positions. A solid ionic crystal already contains ions, but they cannot migrate through the lattice to sustain this kind of ionic conduction under ordinary school conditions.
A cation is positively charged and moves towards the negative cathode in this electrolytic cell. An anion is negatively charged and moves towards the positive anode. At the cathode, a species gains electrons: reduction. At the anode, a species loses electrons: oxidation. Use these reaction definitions, because the positive/negative signs must not be copied without thought to a galvanic cell that is supplying electrical energy instead of being driven by it.
Electrons move through the metallic wires and electrode material; ions carry charge through the electrolyte. Do not draw a free-electron stream swimming through the solution from one electrode to the other. The external supply transfers electrons to the cathode and removes them from the anode. Overall charge and atoms must still balance; the supply is not manufacturing extra copper nuclei.

The H₂ and O₂ labels refer to hydrogen and oxygen in a water-electrolysis illustration. They are not the products of every electrolyte. The picture omits the dissolved supporting electrolyte needed for a useful school current through water; very pure water conducts poorly. No exact gas-volume ratio, purity or electrical setting is established by this drawing. Its two panels are not instructions to collect or ignite gas.
For a simple binary ionic melt with inert electrodes, consider the positive and negative ions of the compound without adding imaginary water species. Molten sodium chloride contains mobile sodium and chloride ions: sodium is produced at the cathode and chlorine at the anode. Molten magnesium chloride similarly gives magnesium and chlorine, but each magnesium ion needs two electrons, unlike a sodium ion's one.
Original publisher: FuseSchool - Global Education, What Is Electrolysis. Distinguish ion movement from electron exchange while using the written model as an accessible alternative. The actual current depends on conditions and apparatus; a general concentration or voltage comparison in an animation is not a guarantee of product purity or a permission to increase a real power setting.
Choose products in molten and aqueous cases separately
Aqueous means dissolved in water, not melted. Water introduces competing electrode reactions in addition to those involving the dissolved salt. For the selected GCSE examples with chemically inert electrodes, compare the metal with hydrogen at the cathode: a metal less reactive than hydrogen, such as copper, can be deposited; for a metal more reactive than hydrogen, such as sodium, hydrogen forms instead.
At the anode, the simplified school rule predicts a halogen from suitable halide-containing solutions and oxygen when appropriate sulfate or similar examples contain no halide. Concentration and electrode conditions matter, especially for competing chlorine/oxygen evolution. Our chloride rows explicitly stipulate sufficiently concentrated solutions and the selected dominant chloride discharge. Do not treat a universal all-concentrations halide slogan as an industrial specification.
The following table is a set of supplied reasoning cases, not observations from a conducted experiment. Inert means that electrode material is not consumed in the idealised reactions here; it does not mean every electrode is universally unreactive in all conditions. Platinum is used for the sulfate examples to avoid silently ignoring possible reactions of a carbon anode.
| Case | Electrolyte and stated electrodes | Negative cathode product | Positive anode product in the stated model |
|---|---|---|---|
| M1 | Molten sodium chloride; inert electrodes | Sodium | Chlorine |
| M2 | Molten magnesium chloride; inert electrodes | Magnesium | Chlorine |
| A1 | Copper sulfate in water; platinum electrodes | Copper | Oxygen |
| A2 | Sodium sulfate in water; platinum electrodes | Hydrogen | Oxygen |
| A3 | Concentrated sodium chloride in water; inert electrodes; chloride discharge stipulated | Hydrogen | Chlorine |
| A4 | Concentrated copper chloride in water; inert electrodes; chloride discharge stipulated | Copper | Chlorine |
Work A1. First identify water, so do not apply the melt-only rule. Copper is less reactive than hydrogen in the supplied comparison and is deposited at the cathode. Sulfate is not a halide; oxygen is the selected anode product with the stated platinum electrodes. Sulfur metal is not predicted simply because the name contains sulfate. Copper ions can be removed from solution, so an unchanged blue colour is not a universal prediction for this inert-electrode case.
Compare M1 and A3. Both contain sodium and chloride, but A3 also contains water. M1 gives sodium metal; A3 gives hydrogen at the cathode. Sodium ions can remain in the aqueous mixture while water is reduced. One suitable alkaline cathode account is 2H₂O + 2e⁻ → H₂ + 2OH⁻. This balances hydrogen, oxygen and charge; it does not require a large initial stock of free hydrogen ions in neutral water.
Oxygen evolution can be written in an alkaline account as 4OH⁻ → O₂ + 2H₂O + 4e⁻. The four negative charges on each side balance. Coupled water-electrolysis reactions give two hydrogen molecules per oxygen molecule in ideal amount accounting, but gas dissolution, leakage and unequal collection conditions can affect collected volumes. Bubble size alone cannot identify a gas or establish a quantitative ratio.
Finish each prediction by recording state, ions/competing water reactions, electrode material, each electrode product and the applicable limits. If the electrodes are copper rather than inert, or the chloride concentration is unspecified, state what extra information is needed rather than pretending the table covers every system.
Audit half-equations and compare active electrodes with extraction
A half-equation shows electron loss or gain for one electrode reaction. Balance atoms and total electrical charge independently. Do not change an ion's charge to make the arithmetic easier or insert electrons as a source of extra chemical elements. In this selected copper-chloride model, the half-equations are:
The cathode has one copper atom on each side, and charge plus two plus two negative electrons totals zero. The anode has two chlorine atoms on each side, and charge minus two on both sides. A chloride ion is not a neutral chlorine atom; a chlorine molecule contains two chlorine atoms. These are electron-transfer and atom accounts, not a description of every intermediate reaction.
Use an original ideal bookkeeping packet: initially list 100 copper(II) ions and 200 chloride ions. The other aqueous species are outside this selected discharge ledger, not asserted absent from water. Suppose six copper ions are reduced and twelve chloride ions oxidised, with only the stipulated products and no side reaction. Twelve electrons are accepted at the cathode and twelve released at the anode. This is the same transferred-charge amount, not twenty-four electrons consumed overall.
The packet makes six copper atoms and six chlorine molecules, leaving 94 copper(II) and 188 chloride ions in the selected ledger. Check copper atoms: 94 plus 6 = 100. Check chlorine atoms: 188 plus twice 6 = 200. The remaining ion charges also balance, since 94 times plus two and 188 times minus one total zero. These tiny illustrative counts are not measured current, laboratory yield or a safe operating quantity.
Electrode material can change the anode reaction. With copper electrodes in a suitable copper-sulfate solution, a school copper-transfer account uses Cu → Cu²⁺ + 2e⁻ at the anode and Cu²⁺ + 2e⁻ → Cu at the cathode. The anode can lose copper while the cathode gains it. Oxygen evolution from an inert electrode is therefore not automatically the correct anode description for an active copper electrode.
Here is a separate original ideal mass record: cathode 10.00 g before and 10.64 g after; anode 12.00 g before and 11.36 g after. The gain and loss are each 0.64 g and the combined electrode mass remains 22.00 g. Equal mass transfer is consistent with the stated ideal copper account, but does not by itself prove purity or rule out wet weighing, detached deposits and side reactions. Do not silently convert these invented numbers into real observations.

Aluminium production uses alumina dissolved in a molten cryolite-based electrolyte. Aluminium forms at the cathode; conventional carbon anodes are consumed as oxygen-containing species react with carbon, mainly forming carbon dioxide. Cryolite helps make the molten process practicable, including a lower operating temperature than pure alumina melting; it is not a source of aqueous hydrogen. Electrical energy supply and anode consumption are both relevant, so electrolysis does not automatically mean zero environmental impact.
Compare the three cases: an inert electrode supporting gas evolution, an active copper anode supplying ions, and a consumed industrial carbon anode. The electrode name alone does not establish its material, durability or every product. A complete explanation states the actual system, checks charge and atoms, and separates ideal accounting from evidence about a real process.
Interactive Tasks
Quiz: Test Your Knowledge
Why does the molten salt conduct in the stated school model while its solid crystal does not? (Its ions can migrate through the liquid rather than remaining at fixed lattice positions) (!Melting creates all ions from previously uncharged crystals) (!Electrons swim through the salt solution instead of ions) (!Every solid ionic material contains only neutral molecules)
Which electrode description applies to this externally driven electrolytic cell? (The negative cathode is the site of reduction) (!The positive cathode is the site of oxidation) (!The negative anode gains electrons) (!The positive anode is defined by reduction)
What carries charge through the electrolyte? (Mobile ions) (!Only free electrons moving from one electrode through the water) (!Uncharged bubbles alone) (!Copper nuclei created by the supply)
How do cathode products differ between M1 and A3? (Molten sodium chloride gives sodium while the stated aqueous case gives hydrogen) (!Both must give sodium because the salt name is the same) (!Both must give chlorine at the cathode) (!The aqueous case cannot contain sodium ions)
What products are selected for A1 with platinum electrodes? (Copper at the cathode and oxygen at the anode) (!Copper at the cathode and sulfur metal at the anode) (!Hydrogen at the cathode and copper at the anode) (!Sodium at the cathode and chlorine at the anode)
Why do the chloride-solution rows specify concentration and selected discharge? (Competing anode reactions can depend on conditions) (!All concentrations always give exactly the same pure product) (!Water is never present in aqueous solutions) (!Chloride ions are uncharged)
What does one copper ion need in the given cathode half-equation? (Two electrons to form one neutral copper atom) (!One electron to form two copper atoms) (!Two extra protons supplied by the wire) (!No charge transfer because it is already neutral)
What does the original packet produce for twelve electrons transferred? (Six copper atoms and six chlorine molecules) (!Twelve copper atoms and twelve chlorine atoms with no ion remainder) (!Six copper atoms and twelve chlorine molecules) (!Twenty-four electrons consumed overall with no anode reaction)
What does the ideal copper-electrode mass record show? (Each electrode changes by 0.64 g in opposite directions with combined mass unchanged) (!Both electrodes gain 0.64 g) (!The anode loses 1.28 g while the cathode stays fixed) (!Equal masses alone prove the deposit is pure and perfectly dry)
Which comparison respects the actual electrode systems? (Active copper can dissolve and conventional industrial carbon anodes can be consumed) (!Every anode is permanently inert) (!Every aqueous salt produces its metal at the cathode) (!The Hall-Heroult electrolyte is ordinary salt water)
Memory Game
| Electrolyte | Liquid containing mobile ions that carry charge |
| Cation | Positive ion moves towards the negative cathode here |
| Anion | Negative ion moves towards the positive anode here |
| Cathode | Reduction occurs through electron gain |
| Anode | Oxidation occurs through electron loss |
| Aqueous | Dissolved in water with competing water reactions |
Drag and Drop
| Molten sodium chloride with inert electrodes | Sodium is the selected cathode product |
| Concentrated aqueous sodium chloride in the stated model | Hydrogen is selected at the cathode and chlorine at the anode |
| Aqueous copper sulfate with platinum electrodes | Copper and oxygen are the selected electrode products |
| Active copper anode in the copper-transfer model | Copper dissolves to form copper ions and releases electrons |
| Conventional Hall-Heroult carbon anode | Carbon is consumed while aluminium is produced from the molten electrolyte |
Crossword Puzzle
| ELECTROLYSIS | What process uses an external direct current to drive chemical change? |
| ELECTROLYTE | What contains the mobile ions carrying charge in the liquid? |
| CATION | What is a positively charged ion called? |
| ANION | What is a negatively charged ion called? |
| CATHODE | At which electrode does reduction occur? |
| AQUEOUS | Which word means dissolved in water rather than melted? |
LearningApps
Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.
Cloze Text
Open Tasks
Easy
- Trace both charge carriers: Draw an original cell model with supply, electrodes, cations and anions. Distinguish ion movement in the liquid from electron flow in the metallic circuit.
- Explain a state comparison: Compare a solid sodium-chloride crystal with its melt. State what is present in both and what changes about mobility.
- Read the water illustration: Explain C, electrode A, meter A, hydrogen and oxygen labels. Identify what this picture cannot establish about an unknown electrolyte, gas purity or exact volume.
- Sort the six product cases: Recreate the M1 to A4 table with states and electrode assumptions. Explain the cathode and anode choices separately for one aqueous row.
Standard
- Balance electron exchange: Audit atoms and total charge for the copper and chloride half-equations. Explain why chlorine is diatomic and why electrons do not supply new nuclei.
- Rebuild the packet ledger: Start from the supplied ion counts and twelve transferred electrons. Calculate each product and ion remainder, then check both atom inventories and the remaining net charge.
- Compare anodes: Contrast platinum in copper sulfate with an active copper anode in the copper-transfer account. Explain why the same solution name need not give the same anode reaction.
- Evaluate the mass record: Calculate both mass changes and the combined totals. Explain which ideal account is consistent with the numbers and why they do not prove purity or rule out weighing problems.
Advanced
- Critique a product slogan: Review the claims that every aqueous salt gives its metal and every halide solution always gives only pure halogen. State the selected school rules, electrode assumptions and missing concentration information.
- Connect two water half-reactions: Use the supplied hydrogen and oxygen half-equations to cancel electrons and hydroxide ions, obtaining the ideal overall water balance. Distinguish theoretical amount ratio from actual collected volumes.
- Compare materials and environmental boundaries: Explain the molten Hall-Heroult electrolyte, cathode lining and consumed carbon anodes. Contrast this with the aqueous examples without claiming zero impact, a current factory measurement or a safe operating plan.
- Delayed unfamiliar case: Create a new supplied inert-electrode aqueous-sulfate prediction using a metal placed above or below hydrogen in an explicit reference series. Justify both products and revisit the reasoning after a delay.
Learning Check
- Mobile ions and electrodes: Explain conduction and electrode identities for this driven cell.
- Molten versus aqueous: Compare M1, A3 and A1 with their assumptions.
- Atoms and charge: Check both displayed copper/chloride half-equations.
- Original packet: Calculate products, remainders and transferred charge.
- Active copper and mass: Calculate the supplied electrode changes and interpret them.
- Water and industrial limits: Connect the water account and distinguish the industrial example.
Worked checks and assessment guidance
- The solid crystal contains ions, but their lattice positions prevent this school ionic-conduction process. In a melt or suitable solution, mobile ions carry charge. Cations approach the negative cathode, where reduction gains electrons; anions approach the positive anode, where oxidation loses electrons. Electrons move in the metallic circuit, not as the solution current carrier.
- Molten sodium chloride gives sodium and chlorine at inert electrodes. The stipulated concentrated aqueous sodium-chloride case gives hydrogen at the cathode because water competes, with chlorine selected at the anode. Copper sulfate with platinum electrodes gives copper and oxygen in the stated model. Sulfate does not imply sulfur-metal production. These rules do not cover every concentration, electrode material or side reaction.
- Copper(II) plus two electrons gives one copper atom: one copper on each side and total charge zero. Two chloride ions give one chlorine molecule and two electrons: two chlorine atoms and total charge minus two on both sides. Reduction gains electrons and oxidation loses them. The external supply transfers charge without creating chemical elements.
- Twelve electrons allow six copper ions to form six copper atoms and twelve chloride ions to form six chlorine molecules. Remainders are 94 copper ions and 188 chloride ions. Copper inventory 94+6=100; chlorine 188+2×6=200; residual ionic charge 94×2−188=0. The same twelve-electron transfer appears at both electrodes, not a twenty-four-electron overall consumption.
- The cathode gains 10.64−10.00=0.64 g and the anode loses 12.00−11.36=0.64 g. Both combined totals are 22.00 g. This is consistent with ideal copper transfer from active anode to cathode through ionic reactions; it does not establish purity or exclude wet weighing, lost deposit and side reactions. The numbers are supplied illustrations, not conducted observations.
- Doubling 2H₂O+2e⁻→H₂+2OH⁻ and combining with 4OH⁻→O₂+2H₂O+4e⁻ cancels electrons and hydroxide to give 2H₂O→2H₂+O₂. This ideal amount ratio need not equal a measured collection ratio. Hall-Heroult instead uses a molten cryolite/alumina electrolyte, aluminium formation at the cathode and conventional carbon-anode consumption, mainly producing carbon dioxide. Neither case assigns an unsupervised experiment or operating procedure.
Learning evidence
Keep an original charge-carrier diagram, six-case prediction table with assumptions, atom/charge half-equation audit, conserved packet ledger and mass-change comparison. Include an active/inert electrode explanation and a delayed unfamiliar prediction. These demonstrate GCSE chemical reasoning, not practical completion, gas identification, electroplating certification or industrial competence.
OER and Wikipedia
Department for Education: GCSE combined science — national subject-content reference bound in the audited preparation package; year placement is editorial.
AQA GCSE Chemistry: Chemical changes, electrolysis sections — mobile ions, molten/aqueous predictions and higher-tier half-equations. Simplified product rules are used with explicit conditions rather than treated as universal operating specifications.
Institute of Physics: Electrolysis — author background on solution charge carriers, deposition and changes with copper electrodes. Historical practical details are not reproduced as instructions or current safety approval.
Royal Society of Chemistry: copper sulfate electrolysis — background for copper deposition and electrode effects; graphite can react, so the ideal sulfate product rows explicitly select platinum.
Geoscience Australia: Aluminium — molten alumina/cryolite, cathode aluminium and consumed carbon anodes producing carbon dioxide; no current production statistic or universal footprint figure adopted.
The six-case labels, 100/200-ion packet and 10.00/10.64/12.00/11.36 g record are original supplied teaching examples, not measured apparatus data or prescribed experiment quantities.
Electrolysis diagram.png — Lorenzo Paulatto (Paulatz at Italian Wikipedia). Public domain release by its author, documented on the linked original file page. Original image embedded unchanged. Water-electrolysis schematic with Italian labels; no exact collected-volume measurement inferred.
Hall-Heroult cell schematic.svg — Parcly Taxel. CC BY-SA 4.0. Original image embedded unchanged. SVG based on the earlier Kashkhan drawing; small industrial labels are context, not operating instructions.
What Is Electrolysis | Reactions | Chemistry | FuseSchool — FuseSchool - Global Education. Original publisher embed without downloading, editing or rehosting; no additional reuse licence asserted.
Linked learning areas
aiMOOC Projects
Schulfach+


aiMOOCs


aiMOOC Projekte


MOOCwiki · Deutsch
Nach dem Lernen ist vor dem Lernen
Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.
Zur MOOCwiki-HauptseiteMediathek
Mediathek wird aus dem Wiki geladen ...
Keine passenden Inhalte gefunden. Bitte ändere Suche oder Filter.
NEWSLernweltNOAH fragen