English:Develop fluency - Unit 1 - Mathematics Year 7
Introduction

Would you rather have 0.6 of a metre of ribbon or 0.58 of a metre? Why is 5³ not 15? If a square has an area of 2.25 m², how long is its side? You can answer these questions by connecting ideas you already know, rather than learning a separate trick for every kind of number.
In this Year 7 course you consolidate whole-number arithmetic and extend place value to decimals, connect decimals with fractions, and interpret powers and roots. You will explain a method, estimate a sensible answer and check it using another representation or an inverse operation. The course develops one part of England's Key Stage 3 mathematics programme; it is not the whole Year 7 curriculum.
You need paper and a pencil. Squared paper or counters help with the diagrams. Make an estimate before using a calculator, then use it to check selected calculations. Read the written explanations as well as watching the optional videos: all essential methods are taught in the course itself. A fraction such as 3/4 means three quarters; a dot marks the decimal point throughout.
Starting check: calculate 48 ÷ 6, 7 × 8 and 100 − 37. Explain why multiplication checks a division. The answers are 8, 56 and 63. For the first calculation, 8 × 6 = 48 checks that eight groups of six make 48. If these are difficult, sketch equal groups or use a multiplication grid before moving on.
Place value gives every digit a job
Build and compare decimals
A digit's value depends on its position. In our base-ten system, each place is ten times the value of the place immediately to its right. Moving from ones to tenths, hundredths and thousandths divides the place value by ten each time. The decimal point separates the ones column from the tenths column; it does not turn the digits after it into a new whole number.
| Ones | Tenths | Hundredths | Thousandths |
|---|---|---|---|
| 3 | 0 | 4 | 2 |
So 3.042 = 3 + 4/100 + 2/1000. The zero is a placeholder: there are no tenths, but the hundredths and thousandths must keep their positions. Removing that zero would produce 3.42, a different number. By contrast, 0.6 = 0.60 = 0.600: adding zeros at the right-hand end of the decimal part changes the way you write the value, not the value itself.
To compare positive decimals, align the decimal points and compare from the largest place to the smallest. For 0.6 and 0.58, write 0.60 and 0.58. Six tenths is greater than five tenths, so 0.6 > 0.58. Counting digits after the decimal point would give the wrong method. For 3.042 and 3.024, ones and tenths agree; the hundredths first differ, and four hundredths is greater than two hundredths. Therefore 3.042 > 3.024.
On a number line, greater numbers are farther right. This also helps with negative numbers: −0.6 is less than −0.58, because −0.60 lies farther left. You cannot compare two negative numbers by ignoring their signs. For example, a temperature of −0.6 °C is colder than −0.58 °C.
Try it: order 0.405, 0.45 and 0.4 from smallest to largest. Then name a decimal between 0.4 and 0.405. Check: 0.400 < 0.405 < 0.450; 0.402 is one possible number between the first two. There is not just one possible answer.
Scale and calculate without losing place
Multiplying a number by ten makes every digit worth ten times as much. Relative to the place-value columns, the digits shift one place towards the larger values. Thus 3.042 × 10 = 30.42 and 3.042 × 100 = 304.2. Dividing by ten gives 0.3042. Explain what happens to the value of each digit; avoid the unhelpful idea that the decimal point itself performs the calculation.
For addition and subtraction, align equal places: 2.7 + 0.46 = 2.70 + 0.46 = 3.16. Treating it as 27 + 46 and putting a point into 7.3 loses the units. You can check 3.16 by subtraction: 3.16 − 0.46 = 2.70. An estimate, 2.7 + about 0.5 ≈ 3.2, also supports the answer.
For multiplication, connect decimals to fractions: 0.4 × 0.3 = 4/10 × 3/10 = 12/100 = 0.12. Multiplication does not always make a positive number larger: multiplying by 0.3 takes three tenths of it. For division, 0.75 ÷ 3 = 0.25 because three lots of 0.25 make 0.75. Write the operation and check rather than relying on the number of decimal places alone.
A money check: four notebooks cost £1.25 each. The total is 4 × £1.25 = £5.00, not £0.50 or £50. Compare with four items costing about £1 each before you accept a calculator result. Money, length and temperature use different units, even when their numerical values look alike.
Fractions and decimals describe the same values
Keep the whole fixed
A fraction has a numerator above its dividing line and a nonzero denominator below it. In 3/4, the denominator divides one whole into four equal parts and the numerator counts three of them. Equal parts matter: three arbitrary pieces of a cake do not necessarily make three quarters. When comparing amounts represented by fractions, state what one whole means. Half of a large bottle may contain more liquid than three quarters of a small one.
Multiplying numerator and denominator by the same nonzero number produces an equivalent fraction. For instance, 3/4 = 75/100 = 0.75. Similarly, 2/5 = 4/10 = 0.4 and 3/5 = 6/10 = 0.6. You can reverse the process: 0.45 = 45/100 = 9/20, where dividing both numerator and denominator by five simplifies the fraction. The decimal digits record tenths, hundredths or smaller equal parts of a whole.
Worked comparison: compare 3/5 with 0.58 of the same ribbon. Convert 3/5 to 0.60. It is greater than 0.58 by 0.02 of the whole. If the whole ribbon is one metre long, that difference is 0.02 m, or 2 cm. Comparing the written numerator 3 with the decimal digits 58 would not compare equal quantities.
Division explains the decimal
You can also read a fraction as a division: 13/5 = 13 ÷ 5. Five goes into 13 twice, leaving three. Write 13 as 13.0; the remainder of three ones becomes thirty tenths. Dividing those thirty tenths into five groups gives six tenths in each group. The result is 2.6. Multiplying back, 2.6 × 5 = 13, checks it.

Some decimals terminate, meaning they end. Others recur. Dividing 1 by 3 gives 0.333… with threes continuing indefinitely. The exact value 1/3 is not equal to 0.33: three lots of 0.33 make only 0.99. You may write 1/3 ≈ 0.33 when rounding to two decimal places, but the approximation sign matters. A calculator display has limited space; it does not show every digit of a recurring decimal.
Watch with a purpose: in Math Antics' fraction-to-decimal video, notice why division continues beyond the whole-number part. Pause and predict the next digit before checking. Then explain 7/4 = 1.75 in your own words: one whole leaves three quarters, which is 0.75. The video is in English and complements the written method.
Choose a form that makes the work clear
For 1/4 + 2/5, use equal-sized parts: 1/4 = 5/20 and 2/5 = 8/20. Adding gives 13/20 = 0.65. Adding top and bottom to get 3/9 would change the size of the parts and is incorrect. A decimal check gives 0.25 + 0.40 = 0.65.
To find 3/4 of 20, divide the whole into four equal groups and take three: 20 ÷ 4 × 3 = 15. To find 0.4 of 30, calculate 4/10 × 30 = 12. Fractions can make the structure clear; decimals can make a place-value calculation convenient. Neither form is automatically more accurate: 3/4 and 0.75 are both exact, while 0.33 is only an approximation to 1/3.
Try it: express 0.125 as a fraction in simplest form, then calculate 0.125 of 24. Check: 125/1000 = 1/8; one eighth of 24 is 3. The value 0.125 has more decimal digits than 0.5 but is smaller. Always compare values, not string lengths.
Powers record repeated multiplication
Read the base and the exponent
In 5³, 5 is the base and 3 is the exponent, also called the index. For a positive whole-number exponent, it tells you how many copies of the base are multiplied. Thus 5³ = 5 × 5 × 5 = 125. It does not mean 5 × 3. The expression 5² is read as five squared, and 5³ as five cubed.
This course concentrates on positive whole-number exponents. Do not extend the repeated-copy explanation to fractional or negative exponents without learning their additional definitions. You can already connect positive powers of ten with place value: 10² = 100 and 10³ = 1000. Therefore 0.042 = 42/1000 = 42/10³. The denominator tells you that the last digit occupies the thousandths place.
| Expression | Expanded multiplication | Value |
|---|---|---|
| 4² | 4 × 4 | 16 |
| 2³ | 2 × 2 × 2 | 8 |
| 10³ | 10 × 10 × 10 | 1000 |
| 0.1² | 0.1 × 0.1 | 0.01 |
| (1/2)³ | 1/2 × 1/2 × 1/2 | 1/8 |
The last two rows correct a common misconception. Squaring a positive number between zero and one makes it smaller, because you are taking a fraction of a fraction. For example, a tenth of a tenth is a hundredth. The fact that 4² is larger than 4 does not make that a rule for every positive base.
See squares and cubes

Four rows of four unit squares have area 16 square units. This explains the name square number. The first few nonnegative square numbers are 0, 1, 4, 9, 16 and 25. Adding the same number of tiles to each row would not generally keep the outside boundary square; row count and column count must agree.
Return to the grid at the start. The numbers fill growing layers from the top left. Its main diagonal reaches 1, 4, 9, 16 and so on, because the corner of each new square counts all its cells. The whole grid has 17 rows and 17 columns, so it contains 17² = 289 cells. You do not need to memorise the whole picture to use this reasoning.
A cube has three equal dimensions. A cube with an edge of 2 cm contains 2 × 2 × 2 = 8 cubic centimetres. The numerical operation 2³ matches the three dimensions. Do not write 8 cm² for this volume: square centimetres measure area, not volume.
Try it: calculate 3³, 6² and 0.2² without a calculator. Check: 27, 36 and 0.04. For the last result, 2/10 × 2/10 = 4/100 gives the place value directly. A result of 0.4 would be ten times too large.
Roots undo powers and support checking
Ask the inverse question
Squaring asks, “What is this number multiplied by itself?” A square root asks the inverse question: “Which nonnegative number squares to give this value?” Thus √16 = 4, because 4 × 4 = 16. The symbol √ means the principal square root, which is nonnegative. It does not name both signs.
There is an important distinction: the equation x² = 16 has two real solutions, x = 4 and x = −4, since both squares are 16. But the expression √16 has the single value 4. Keeping the expression and the equation separate prevents the misleading answer “√16 = ±4”. The square root of zero is zero. Negative numbers have no square root among the real numbers studied here.
A cube root undoes cubing. The cube root of 8 is 2 because 2³ = 8. This matches the edge of a cube with volume 8 cm³. You can check a proposed square root by squaring it and a proposed cube root by cubing it; choosing the right inverse matters.
Watch with a purpose: Math Antics explains the connection between exponents and square roots. Pause to sketch a square of 25 equal tiles. Explain why its side contains five tiles, then write both 5² = 25 and √25 = 5. The second statement recovers the side length from the total.
Connect roots with fractions, decimals and units
Suppose a square display mat has area 2.25 m². Its side is √2.25 m. Since 1.5 × 1.5 = 2.25, the side is 1.5 m. Another explanation uses fractions: 2.25 = 9/4, and (3/2)² = 9/4, so the positive side is 3/2 m. Taking half the area, 1.125, is not how to find a square's side.
Worked inverse check: a learner proposes √0.09 = 0.03. Squaring the proposal gives 0.0009, so it cannot be right. The correct answer is 0.3, since 0.3² = 0.09. This is why place value and roots belong in the same course. The result is exact; no rounding is needed.
Some roots do not have a terminating or recurring decimal representation. For √2, begin with 1² = 1 and 2² = 4, so 1 < √2 < 2. Narrow the interval: 1.4² = 1.96 and 1.5² = 2.25, so 1.4 < √2 < 1.5. A calculator gives about 1.41421356, and √2 ≈ 1.41 to two decimal places. Do not replace ≈ by =: 1.41² = 1.9881, not exactly 2. The square-root symbol itself can express the exact value.
A connected problem: a square has side 3/4 m. Its area is (3/4)² m² = 9/16 m² = 0.5625 m². Taking √0.5625 recovers the positive side 0.75 m. Here fractions, decimals, powers, roots and units describe different stages of one calculation. Start with a representation you understand, work carefully, and check by reversing the operation.
Interactive Tasks
Quiz: Test Your Knowledge
Choose one answer for each question. Work out the value before choosing; a short written check helps you identify the misconception behind a wrong option.
What is the value of the digit 4 in 3.042? (Four hundredths) (!Four tenths) (!Four thousandths) (!Four ones)
Which statement correctly compares 0.6 and 0.58? (0.6 is greater because it equals 0.60) (!0.58 is greater because it has more decimal digits) (!They are equal because both start with zero) (!0.6 is smaller because 6 is less than 58)
What is 3.042 multiplied by 100? (304.2) (!30.42) (!3.04200) (!0.03042)
Which decimal is exactly equal to three quarters? (0.75) (!0.34) (!0.43) (!0.075)
What is one quarter plus two fifths? (Thirteen twentieths) (!Three ninths) (!Three twentieths) (!Eight ninths)
Which statement about one third is correct? (0.33 is an approximation to one third) (!0.33 is exactly one third) (!One third is exactly 0.3) (!One third has no decimal representation)
What is the value of five cubed? (125) (!15) (!25) (!53)
What is the value of 0.1 squared? (0.01) (!0.2) (!0.1) (!1)
What is the principal square root of 16? (4) (!Negative 4) (!Both positive 4 and negative 4) (!8)
A square has area 2.25 square metres. What is its side length? (1.5 metres) (!1.125 metres) (!4.5 metres) (!2.25 metres)
Memory Game
Match each idea with its distinctive meaning. Say a fresh example aloud after each match.
| Place value | A digit's worth determined by its position |
| Equivalent fractions | Different fraction forms with exactly the same value |
| Numerator | The upper part that counts the fraction's parts |
| Exponent | The positive whole-number index counting repeated factors in this course |
| Principal square root | The nonnegative value whose square gives the stated number |
| Approximation | A useful nearby value that need not be exact |
Drag and Drop
Match each mathematical job to the method that explains it. These pairs describe methods, not a race to recognise a numeral.
| Mathematical job | Useful method |
|---|---|
| Compare positive decimals | Align place values and inspect the first differing digit |
| Add fractions with unlike denominators | Rewrite using equal-sized fractional parts |
| Interpret a positive integer power | Expand as repeated multiplication of the base |
| Test a proposed square root | Multiply the proposed value by itself |
| Communicate a rounded result | Use an approximation sign and state the precision |
Crossword Puzzle
| DECIMAL | What kind of representation uses a point followed by tenths and smaller places? |
| FRACTION | What representation uses a numerator and a nonzero denominator? |
| EXPONENT | What name is given to the index in a power? |
| ROOT | What operation reverses a corresponding power, as in a square or cube what? |
| PLACE | Which word completes the expression describing a digit's positional value? |
| ESTIMATE | What do you make first to predict a reasonable approximate answer? |
LearningApps
LearningApps is an external collection. Search results can change and are not the course's assessed tasks. Choose an activity that matches your current topic and check its explanations. The independent practice below remains available if the external search does not load.
Cloze Text
Open Tasks
Build a small fluency portfolio. For each task, show your method and a check; a correct answer alone does not explain why it works. You may draw, write, record a short explanation or use counters. The models below are starting points for checking reasoning, not scripts to copy.
Easy
- Digit detective: Make a labelled place-value chart for 6.035. Write the value of each nonzero digit and explain why deleting the zero changes the number.
- Decimal cards: Make cards for 0.7, 0.67 and 0.705. Put them in increasing order and draw a number line showing why the order is correct.
- Same whole, different form: Draw a rectangle divided into twenty equal parts, shade fifteen and label the shaded fraction in simplest form and as a decimal.
- Tile square: Arrange or draw twenty-five unit tiles as a square. Write the matching power and square-root statement, then explain the difference between the total and one side.
Easy task models: 6.035 has six ones, three hundredths and five thousandths; 6.35 would have three tenths instead. The cards read 0.670 < 0.700 < 0.705. Fifteen out of twenty is 15/20 = 3/4 = 0.75. A five-by-five arrangement gives 5² = 25 and √25 = 5; the total counts square units, whereas a side counts units of length.
Standard
- Choose an efficient representation: Calculate 3/8 + 1/4 exactly. Show a fraction method and a decimal check, and explain why both methods agree.
- Repair a checkout: A fictional receipt shows three items at £0.80 each costing £24.00. Create a corrected receipt and a short explanation using both place value and an estimate.
- Explain the index: Record a one-minute lesson comparing 4³ with 4 × 3 and 0.2² with 0.2 × 2. Include an expanded multiplication and one model or diagram for each power.
- Measure the imagined mat: A fictional square mat has area 6.25 m². Find its side length, check by multiplication and explain why dividing the area by two is not the right operation.
Standard task models: 3/8 + 2/8 = 5/8; 0.375 + 0.25 = 0.625 confirms it. Three groups of eighty pence total 240 pence, or £2.40; the answer should be less than £3. The powers give 4 × 4 × 4 = 64 and 0.2 × 0.2 = 0.04; the ordinary products give 12 and 0.4. The mat's side is 2.5 m, since 2.5² = 6.25; area equals side times side, not side times two.
Advanced
- Design a connected number trail: Choose 0.64 or 0.5625. Build a poster connecting its decimal, simplest fraction, positive square root and the square of that root. Include an area context with units and an inverse check.
- Test an exactness claim: A fictional learner says three shares of 0.33 make exactly one whole. Write a respectful correction with a calculation, an exact fraction alternative and advice about when rounding is acceptable.
- Bound before calculating: Prove that √3 lies between 1.7 and 1.8 by squaring the endpoints. Use a calculator only afterwards to round √3 to two decimal places, and explain why the rounded value is not an exact equality.
- Build a misconception clinic: Prepare a short peer-teaching activity about two different errors, one involving decimal place value and one involving roots or powers. Give a plausible wrong answer, a counterexample, a corrected method and a new check question with its answer.
Advanced task models: one trail is 0.64 = 64/100 = 16/25, √0.64 = 0.8 = 4/5 and (4/5)² = 16/25; a square of area 0.64 m² has side 0.8 m. Another is 0.5625 = 9/16 with positive root 3/4. Three lots of 0.33 equal 0.99, while three lots of 1/3 equal exactly one; round only to a stated precision appropriate to the question. For √3, 1.7² = 2.89 and 1.8² = 3.24, so the positive root lies between them; √3 ≈ 1.73, and 1.73² = 2.9929. A clinic could contrast the false claims 0.72 > 0.8 and √36 = 18 with the checks 0.72 < 0.80 and 6² = 36; a fresh question is to compare 0.91 with 0.9 and find √49, giving 0.91 > 0.90 and 7.
Learning Check
Try these six connected tasks independently, then use the feedback to identify a specific next practice step. Do not look at the feedback until you have written a method.
- Trace a scaling error: A learner writes 0.407 × 100 = 0.40700. Correct the answer, explain the changing value of the digit 4 and give an inverse check.
- Compare a choice: Two fictional offers give you 5/8 m or 0.62 m of the same ribbon. Which is longer and by how much? Give one exact decimal and one fraction calculation.
- Combine and verify: Calculate 2/3 + 1/6 exactly, check whether the answer is above or below one, and explain why 0.83 is not its exact decimal value.
- Challenge a generalisation: A learner says that squaring every positive number makes it larger. Give a whole-number example that suggests the claim, a fractional counterexample that disproves it, and an explanation of both calculations.
- Recover two dimensions: A square has area 0.81 m² and a cube has volume 0.125 m³. Find their positive side and edge lengths using the correct roots; check both with powers and label the units.
- Explain a calculator display: Without a calculator, place √10 between two consecutive whole numbers. Then explain whether a display reading 3.16227766 should be reported as an exact equality or an approximation, and contrast this with √9.
Feedback for task 1: the result is 40.7. The 4 changes from four tenths to four tens, a hundredfold increase. Dividing 40.7 by 100 returns 0.407. Zeros added at the right-hand end of a decimal do not multiply its value.
Feedback for task 2: 5/8 = 0.625, which exceeds 0.620 by 0.005 m. As fractions, 5/8 − 31/50 = 125/200 − 124/200 = 1/200 m. Both methods describe the same difference, equal to 5 mm. Include the fixed whole and unit in your explanation.
Feedback for task 3: 2/3 = 4/6, so the sum is 5/6, which is below 6/6 = 1. Its decimal representation is 0.8333… with threes recurring after the first digit. The value 0.83 is a two-decimal-place approximation, not an exact equality. Adding denominators would not add equal-sized parts.
Feedback for task 4: 3² = 9 is greater than 3, but (1/2)² = 1/4 is less than 1/2. Taking half of half makes a smaller amount. One counterexample is enough to refute a claim about every positive number; the examples support the more precise distinction between bases above one and bases between zero and one.
Feedback for task 5: the square's side is √0.81 = 0.9 m, since 0.9² = 0.81. The cube's edge is the cube root of 0.125, or 0.5 m, since 0.5³ = 0.125. A square root would not recover the cube's edge. The results are lengths in metres, not areas or volumes.
Feedback for task 6: 3² = 9 and 4² = 16, so 3 < √10 < 4. The finite display is an approximation; write √10 ≈ 3.16227766 if that precision is relevant, or give a suitably rounded value. By contrast, √9 = 3 exactly, and squaring 3 verifies it without rounding.
Learning evidence
Your portfolio should show more than fast answers. Include a place-value chart with a zero placeholder, a correctly ordered set of decimals, and an explanation of scaling by a power of ten. Show an addition or subtraction aligned by place value and a multiplication or division checked by its inverse.
Include a fraction model with equal parts and a stated whole, an exact fraction-to-decimal conversion, and one comparison using a common representation. Show why a rounded recurring decimal is not an exact fraction. For powers, distinguish a base and an exponent, expand a square and a cube, and include a fractional or decimal base.
For roots, give one exact square root, one cube root and one root bounded between known values. Explain the principal square root versus the solutions of a squared equation. Apply these ideas to an area or volume problem with correct units and a reverse check. Finish with a corrected misconception and a new example demonstrating what you changed.
Self-review: if a calculation is correct but you cannot justify it, revisit the matching explanation chapter and improve the reasoning. If a calculator answer conflicts with your estimate, inspect the operation, decimal places and units. These products can document your learning; completing the online activities alone does not prove mastery of every topic in Key Stage 3.
OER and Wikipedia
The explanations, synthetic contexts, calculations and task models in this course are newly written. The following inspected sources support the curriculum and mathematical ideas; their examples have not been copied as a substitute for teaching.
Curriculum and reference reading: Department for Education: mathematics programmes of study, Key Stage 3 number and mathematical fluency; NCETM: ordering and comparing, professional-development guidance used for planning; OpenStax Prealgebra 2e: decimals and square roots, open reference chapters. The statutory programme specifies Key Stage 3 as a whole; this course's Year 7 placement is an editorial progression choice.
Media sources and rights: the images below are embedded unchanged, apart from display sizing. Each link names the exact Commons file used.
| File or video | Inspected source | Creator | Licence or usage note |
|---|---|---|---|
| File:Quadrê 289.png | Growing square grid | Gloria sah | CC BY-SA 4.0; unchanged image |
| File:Square number 16.png | Sixteen as a square | Fredrik, as identified in the original file description | Public-domain dedication recorded on the file page |
| File:Fraction to Decimal.jpg | Fraction-to-decimal diagram | SG0039 | CC0; unchanged image |
| https://www.youtube.com/watch?v=do_IbHId2Os | Convert any Fraction to a Decimal | mathantics | External English-language YouTube embed; no open licence asserted |
| https://www.youtube.com/watch?v=B4zejSI8zho | Exponents and Square Roots | mathantics | External English-language YouTube embed; no open licence asserted |
Further exploration: the English Wikipedia article below extends the square-number picture. Some later material is beyond this introductory course; use the first definitions and diagrams to revisit the connection between rows, columns and powers.
Linked learning areas
aiMOOC Projects
Schulfach+


aiMOOCs


aiMOOC Projekte


MOOCwiki · Deutsch
Nach dem Lernen ist vor dem Lernen
Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.
Zur MOOCwiki-HauptseiteMediathek
Mediathek wird aus dem Wiki geladen ...
Keine passenden Inhalte gefunden. Bitte ändere Suche oder Filter.
NEWSLernweltNOAH fragen