Zum Inhalt springen

English:Design & Technology Year 7 - Structural performance and forces

Aus MOOCsWiki Staging
aiMOOC-Siegel aiMOOC

Design & Technology Year 7 - Structural performance and forces

QR-Code



Introduction

Why can a folded sheet resist bending better than a flat one made from the same starting material? How does a bridge move a load through its members into its supports? Learn to explain structural performance and judge whether a comparison supports a design claim.

Analyse diagrams and supplied fictional records on paper. No physical load test, climbing, bending of real structures or destructive experiment is required. Real model making and testing need teacher-approved materials, safe limits, suitable equipment and direct supervision. Year 7 is an editorial placement within Key Stage 3; an online result is not a structural safety approval.


Trace a load path and identify structural actions

A load is an action applied to a structure, such as an object's weight or a sideways push. A member is an identifiable structural element, such as a beam, column or tie. A joint connects members; a support transfers actions to another part of the system. A load path describes how an applied load is carried through connected parts to the supports and ultimately to the supporting ground or structure. It is a reasoning model, not a visible stream that can be read directly from a photograph.

Tension is an axial pulling action that tends to lengthen a member. Compression is an axial pushing action that tends to shorten it. In a simple idealised example, a straight vertical column carrying a centred downward load is mainly in compression, while a tie resisting separation is in tension. The actual arrangement matters: an off-centre action can also cause bending. Do not assume that every vertical member is compressed or every diagonal is pulled.

Bending changes the curvature of a member. A simply supported horizontal beam sagging under a downward load typically has compression near its upper surface and tension near its lower surface. Torsion is twisting about the member's length. Shear involves internal actions tending to make adjacent parts slide relative to each other. These actions can occur together; giving one word to an entire complicated structure can hide important behaviour.

Lachlan Arthur's Warren-truss model: downward load arrows near the central upper joints and upward support arrows at the ends. Member-action colours belong to this particular idealised case, not every bridge.
Lachlan Arthur's Warren-truss model: downward load arrows near the central upper joints and upward support arrows at the ends. Member-action colours belong to this particular idealised case, not every bridge.

The diagram shows a chain of triangles, horizontal members and two end supports. Its source identifies red members as compression, blue as tension and black as zero axial stress in the illustrated idealised case. Read the accompanying words as well as the colours. Trace the downward arrows through the connected framework to the end reactions. An upward support reaction is a force acting on the bridge from its support, not proof that a member itself is in tension.

For a simple paper model, imagine a symmetric beam with a 4 N downward force at its centre and identical simple supports at equal distances on either side. Ignore the beam's own weight. Symmetry gives an upward reaction of 2 N at each support; together they balance the 4 N downward force. The newton, N, is a force unit, not a mass unit. This example does not calculate the forces in the pictured truss or specify an actual load-test procedure.

The usual ideal pin-jointed truss model assumes straight members, suitable joints and loads applied at joints, so members are represented mainly by axial tension or compression. Real connections, member weight, off-joint loading, deformation and sideways effects can introduce further behaviour. A model is useful because its assumptions are stated. Changing the load location or support arrangement can change member actions; colour labels from one drawing cannot be transferred automatically to another.

Your first evidence is an annotated sketch: name the applied load, members, joints and supports, then explain a plausible route to the supports. State what is given and what would require calculation or inspection. Never test a public bridge, shelf or other real structure by adding loads, standing on it or altering its connections.


Choose reinforcement for a stated performance problem

Strength, stiffness and stability answer different questions. Strength concerns resistance to a defined failure, such as fracture or permanent deformation beyond an agreed limit. Stiffness concerns resistance to elastic deformation under a stated action. Stability concerns maintaining a suitable configuration or equilibrium rather than tipping, racking or buckling. A stiff member can still be part of a poorly supported structure, and a stable-looking frame may still have an inadequate joint.

Section shape means the shape seen when a member is viewed in cross-section. Folding a thin sheet can place material farther from the section's central region and increase bending stiffness in a chosen direction. A rib is a reinforcing feature or member that supports a panel or shape. These features use geometry; they do not transform one material into another. Orientation, dimensions, material grade, defects and the connection to the rest of the product remain important.

Triangulation divides a framework into connected triangular units. An ideal rectangle with freely rotating corner joints can change into a parallelogram without changing its side lengths. An appropriately connected diagonal constrains that movement by forming triangles. Bracing provides members or arrangements intended to resist unwanted movement. The brace and its joints must actually carry the relevant actions. A slack tie may resist one direction of movement differently from the opposite direction, so drawing a diagonal does not guarantee every required behaviour.

A gusset is a plate or reinforcing piece used at a connection to join or support members. In a classroom model a proposed gusset can spread a connection over a larger area, but its material and attachment still need to be suitable. A rib along a panel and a gusset at a joint address different places in the load path. If a connection slips or separates, a stronger-looking main member may not solve the actual weakness. Professional gusset design is more demanding than the conceptual definition used here.

Leonard G.'s side view of a truss bridge: horizontal, vertical and diagonal members are connected around a deck. Use it to observe arrangement; dimensions, current condition and load capacity are not supplied by the photograph.
Leonard G.'s side view of a truss bridge: horizontal, vertical and diagonal members are connected around a deck. Use it to observe arrangement; dimensions, current condition and load capacity are not supplied by the photograph.

Compare the photograph with the simplified drawing. Both show connected structural members, but they are not identical truss arrangements. Identify diagonals and where members meet, then distinguish visible geometry from unverified forces. The source photograph has a background already blurred by its author; it is reproduced without further editing here. Neither a photograph nor a visible triangle establishes the current safety of a bridge.

Make reinforcement choices against a specific issue. If a paper frame racks sideways, propose and explain appropriate bracing. If a panel deflects too much, consider a suitable fold, rib or section orientation. If a joint is the concern, investigate the connection rather than adding unrelated material elsewhere. These are predictions to review, not guaranteed fixes. Added pieces can increase mass, cost, assembly effort or create new weak connections.

Use a claim-evidence-reasoning record. Name the performance problem, proposed change, expected mechanism and evidence you would need. For example: 'I predict this specified fold will reduce deflection under the same comparison conditions because it changes the section geometry. I would need controlled results and a connection check.' Do not write 'triangles are always strongest' or 'more material always makes it safe'. Real products need several requirements and an appropriate design review.


Interpret a controlled comparison without overclaiming

Fictional question: under one defined light central load, how does the cross-sectional form of a paper model affect its deflection? Deflection is displacement from a reference position. This comparison measures bending response at a given load, not the load at which the model breaks. All readings below are invented teaching records; no model was physically tested.

In the supplied plan, A is flat and B has a specified folded section. They use the same starting paper grade, thickness, sheet amount and member length, with the same 200 mm support span. They also use the same supports, central load position, 2 N applied force, duration, measuring reference and recording method. The changed feature is the intended section form. Exact fold geometry must be documented for any real repeat; 'folded somehow' is not a reproducible specification.

Fictional record Section and span Supplied deflection readings Mean deflection
A Flat; 200 mm 8, 9, 10 mm 9 mm
B Specified fold; 200 mm 2, 3, 4 mm 3 mm
C Folded; 150 mm 1, 2, 3 mm 2 mm; different condition

For A, add 8, 9 and 10 mm to obtain 27 mm, then divide by three readings to obtain a mean of 9 mm. For B, 2 + 3 + 4 = 9 mm and the mean is 3 mm. B's mean deflection is 6 mm less and one third of A's under these invented conditions. The smaller recorded displacement supports the statement that B is the stiffer model in this comparison. It does not show that B's material has become stronger or that its breaking load is three times larger.

Each set also has a range of 2 mm, found by subtracting the minimum reading from the maximum. Repeats expose variation, but three invented readings cannot establish a universal performance distribution. A real investigation needs an agreed interpretation of measurement uncertainty and enough appropriate observations. Keep the actual readings instead of only reporting the most impressive result.

Record C looks tempting because its mean is 2 mm from readings 1, 2 and 3 mm. However, C used a 150 mm support span rather than 200 mm. Even if its load and paper were otherwise matched, the shorter span changes the comparison. You cannot attribute its smaller deflection solely to the folded shape. Retain C as a different-condition record and propose a matched-span comparison; do not secretly relabel the span or delete inconvenient data.

A useful teacher-review test plan states the question, changed feature, measured response, controlled conditions, repeat approach, recording method and limits. Actual equipment, permitted forces, support security, containment of any possible falling part, stopping criteria and supervision must be approved by the teacher. Do not escalate a physical load until failure or use a model to support a person. This course asks only for the written plan and analysis.

The optional James Dyson Foundation video introduces a bridge-model context. Its presence does not require copying a demonstration or its loading. The written material supplies the force vocabulary, data and reasoning for every assessed task. No task depends on seeing a particular result in unreviewed footage.

Conclude narrowly: 'In the supplied fictional matched comparison, B has lower mean deflection than A. Further evidence is needed for strength, stability, joint performance and any real application.' Submit that conclusion with a labelled load-path sketch and a proposed reinforcement justified by the problem. Keep predictions, supplied records and genuine teacher-observed practical evidence distinct.


Interactive Tasks


Quiz: Test Your Knowledge

What does a load path describe? (How an applied load is carried through connected parts to supports) (!A coloured line proving the exact capacity of any photograph) (!Only the route taken by a visitor across a bridge) (!A list of prices without structural connections)



Which idealised member is mainly in compression? (A straight column carrying a centred downward load) (!A tie resisting separation through an axial pull) (!Every diagonal member regardless of its loading) (!Every member shown in a blue photograph)



What does torsion describe? (Twisting about a member length) (!Only an axial pull) (!Only the colour of a joint) (!The price of a panel)



What is the distinction between stiffness and strength? (Stiffness concerns deformation while strength concerns a defined failure) (!They are always the same measured quantity) (!Either word certifies every joint and support) (!Stiffness is only a bridge type)



Why can a suitable diagonal brace reduce frame racking? (It forms connected triangles that constrain the sideways change of shape) (!It makes every joint irrelevant) (!It changes all materials into steel) (!It guarantees identical behaviour under every possible load)



What is a gusset used for in the lesson? (Joining or supporting members at a connection) (!Measuring the colour of a video) (!Replacing every support with an unsupported drawing) (!Proving that all bridges carry the same load)



What is the mean of the fictional A readings 8 mm 9 mm and 10 mm? (9 mm) (!27 mm) (!8 mm) (!10 mm)



What does the lower fictional B mean establish within the stated comparison? (A smaller displacement under the same applied load and comparison conditions) (!A breaking load exactly three times larger) (!Proof that its base material changed into another substance) (!Approval for a model to support a person)



Why is C not a matched comparison for the effect of section form? (Its support span is shorter than the A and B span) (!Its readings cannot have a mean) (!Any smaller reading must be deleted) (!Every folded model always has identical conditions)



What conclusion is justified from the bridge photograph? (Visible members and connections can be described while capacity remains unverified) (!Its exact current breaking load can be read from appearance) (!Every visible vertical member must be compressed) (!A learner may test it by adding loads)





Memory Game

Tension Axial pulling action tending to lengthen a member
Compression Axial pushing action tending to shorten a member
Bending Change in curvature of a member
Torsion Twisting about the length of a member
Shear Internal action tending to make adjacent parts slide
Deflection Displacement from a stated reference position





Drag and Drop

Fold Change section geometry to influence bending response
Triangulation Divide a framework into connected triangular units
Gusset Join or support members at a connection
Rib Reinforce a panel or shape with a supporting feature
Bracing Resist unwanted movement through a structural arrangement





Crossword Puzzle

TENSION Axial pulling action on a member
TORSION Twisting action about a member length
GUSSET Plate or reinforcing piece used at a connection
BRACING Structural arrangement intended to resist unwanted movement
STIFFNESS Resistance to elastic deformation under a stated action
DEFLECTION Displacement measured from a reference position





LearningApps

Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.


Cloze Text

Complete the explanation.
An axial pulling action is

. An axial pushing action is

. Changing a member's curvature involves

. Twisting about its length is

. A plate at a connection can be a

. A reinforcing feature along a panel can be a

. A movement-resisting structural arrangement is

. Displacement from a reference position is

.



Open Tasks


Easy

  1. Name the structural actions: Distinguish tension compression bending torsion and shear. Use the ideal column and tie examples then state why one word may not describe a whole structure.
  2. Annotate a load path: Draw a conceptual beam and two supports with a central downward load. Label members supports applied force and reactions using the four-newton fictional example.
  3. Compare the images: Describe the triangular framework and support arrows in the diagram and the members visible in the bridge photograph. Separate visible geometry from unverified forces and capacity.
  4. Calculate the comparison: Calculate means and ranges for the three supplied records with millimetre units. Mark which two records share the stated support span.


Standard

  1. Choose a reinforcement: For a paper frame predicted to rack sideways choose a suitable reinforcement and explain the connection requirements. Contrast this with a panel-deflection problem. Submit a drawing rather than a physical test.
  2. Distinguish performance: Explain how strength stiffness and stability could lead to different questions about the same model. State what the supplied deflection readings do and do not measure.
  3. Audit the comparison: Identify the changed feature measured response and controlled conditions for A and B. Explain why C cannot establish the effect of section form.
  4. Write a teacher-review plan: Draft a controlled comparison with repeats recording method and teacher-approved safe limits supervision and stopping criteria. Do not perform physical loading or destructive tests.


Advanced

  1. Challenge a strong claim: Critique the claim that B must carry three times the breaking load because A has three times its mean deflection. Explain the missing failure evidence and the role of a defined method.
  2. Transfer to a shifted load: Explain qualitatively why moving a load away from the centre can alter support reactions and member actions. State why the two-newton-per-support result cannot be transferred unchanged.
  3. Investigate the connection: Compare a proposed rib at a panel and a gusset at a joint. Identify what each is intended to address and what practical evidence would still be required.
  4. Submit a bounded recommendation: Combine a load-path sketch reinforcement prediction and evidence-based comparison. Retain the different-condition C record and distinguish fictional data proposed work and actual observed evidence.



Learning Check

  1. Reason through the system: How do loads members joints and supports form a load path?
  2. Classify with assumptions: Why can a column be compressed while a different vertical member is pulled?
  3. Interpret the paper data: What do the A and B records show?
  4. Retain a confounded record: How should C be handled?
  5. Choose a relevant change: Why do ribs bracing and gussets need different explanations?
  6. Bound the final decision: Why is the report not a structural safety certificate?


Worked checks and assessment guidance

  1. An applied action is carried through connected members and their joints to the supports and supporting system. The route depends on geometry loading and connection behaviour. A support reaction acts on the structure and is not itself a statement that a particular member is in tension. A photograph alone does not provide all the information needed to calculate forces or capacity.
  2. The ideal straight column with a centred downward action is mainly compressed because its end actions push inward along its length. A tie resisting separation is pulled in tension and other arrangements may combine actions. Orientation alone does not decide the internal action so geometry loading reference assumptions and connections must accompany a label.
  3. Their means are nine and three millimetres and both ranges are two millimetres. In the supplied matched-span comparison B has six millimetres less mean deflection and one third of the A mean under the same applied load. This supports a stiffer model response in that comparison rather than an exact breaking-load ratio or a universal material-strength claim.
  4. Its one two and three millimetre readings give a mean of two millimetres but its span is one hundred and fifty rather than two hundred millimetres. The comparison changes span as well as the intended form so the difference cannot be attributed solely to the section. Preserve the condition and record then propose a matched-span comparison rather than hiding or relabelling the evidence.
  5. A rib supports a panel or shape bracing resists unwanted movement and a gusset joins or supports members at a connection. Their usefulness depends on the actual performance problem load path materials and attachments. Adding a feature at an unrelated place may not address a weak joint or unstable arrangement and can add mass cost or assembly complexity.
  6. The numerical records are invented and describe deflection under a single specified comparison. They do not establish complete strength stability joint behaviour durability or suitability for real use. Any actual making or load testing requires school-approved arrangements and direct teacher observation while real structures require appropriate professional assessment rather than a learner experiment.


Learning evidence

Submit a labelled conceptual load-path sketch with tension compression bending and torsion explanations. Include a reasoned reinforcement proposal that identifies the actual performance problem and the relevant joints.

Submit the A B and C mean/range calculations a controlled-comparison audit and a teacher-review test plan. Keep the shorter-span record visibly identified. Use a conditional conclusion that distinguishes stiffness from strength and stability. Practical work remains pending unless directly observed through approved school arrangements; online explanations and supplied fictional results cannot certify a structure.


OER and Wikipedia

Department for Education: Design and technology, selected Key Stage 3 structural elements and evaluation — original current programme checked. Year placement, fictional data and activities are editorial; the programme applies to the key stage.

TeachEngineering: Fairly Fundamental Facts about Forces and Structures, selected force-action explanations — original body checked for tension compression bending torsion and shear vocabulary. Examples here are original; no source practical activity, worksheet or structural operating advice is reproduced.

TeachEngineering: Doing the Math, Analysis of Forces in a Truss Bridge, selected truss assumptions — actual truss and force-model passages checked. The simplified assumptions are distinguished from real connections. No source trigonometry task, spreadsheet or assessed work is copied, and its US grade range is not treated as an England year mapping.

Open University OpenLearn: Design, The structural heart of the machine, selected geometry and stiffness explanation — actual selected body checked. Only conceptual distinctions are used; no ruler-breaking, knife, loading, rope or other practical source exercise is adopted. No claim that a broad material family always has one stiffness.

Science Buddies: Paper Bridge Design Challenge, selected cross-section explanation — actual background checked for the influence of section form. No worksheet, image, activity sequence or collapse test is copied. All numerical records below are original fiction and no particular winning fold is guaranteed.

Steel Tube Institute: Jeffrey A. Packer, Gusset Plate-to-HSS Column Connections Under Eccentric Brace Loads, February 2014, selected connection introduction — actual original introduction checked to ground the role of a brace-to-gusset connection and the importance of connection behaviour. No source equations, welding instruction or current AISC/ISO compliance claim is adopted.

Commons: Warren truss bridge with forces.svg — Lachlan Arthur; CC BY 3.0 (https://creativecommons.org/licenses/by/3.0). Exact original record and actual preview checked; no further image editing by this course.

Commons: RRTrussBridgeSideView.jpg — Image by en:User:Leonard G.; Public domain (file record: PD-self). Exact original record and actual preview checked; no further image editing by this course.

Lachlan Arthur's Warren-truss drawing is dated 2009; the original record offers GFDL and CC BY 3.0. Its action colours apply to the illustrated load case and are not a verified calculation for every bridge. RRTrussBridgeSideView.jpg credits Image by en:User:Leonard G.; its date is an upload on 23 January 2006, not a confirmed capture date. The record states a public-domain release on 15 January 2012 and that the author blurred the background for clarity and compression. It is used for visual arrangement, not a current bridge inspection or a verified force/capacity determination.

James Dyson Foundation: Educational Activities for Kids: Spaghetti Bridges — fresh creator metadata and embed eligibility checked and actual bridge-model preview seen. No full-film or transcript review, open video licence, download or republication is claimed. No demonstration procedure must be copied and the written lesson supplies every assessed concept.

The beam-reaction example, comparison records, spans, readings, questions and model answers are original fictional teaching material. They do not describe an actual test, complete structural analysis, professional design approval or independent subject-specialist endorsement.


Linked learning areas


aiMOOC Projects



Schulfach+




aiMOOCs



aiMOOC Projekte









MOOCwiki · Deutsch

Nach dem Lernen ist vor dem Lernen

Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.

Zur MOOCwiki-Hauptseite

Mediathek

Suche verfeinern

Dein Lernplan bestimmt, was oben steht. Alle anderen Inhalte bleiben erreichbar. Seitenaufrufe beeinflussen die Auswahl nicht.

Inhalte werden geladen ...

Mediathek wird aus dem Wiki geladen ...