Zum Inhalt springen

English:Design & Technology Year 7 - Mechanical systems and movement

Aus MOOCsWiki Staging
aiMOOC-Siegel aiMOOC

Design & Technology Year 7 - Mechanical systems and movement

QR-Code



Introduction

A mechanism can make an output slower, reverse its direction, multiply a turning effect or change rotation into a repeated straight movement. It cannot create energy. Learn to label the input and output, calculate a clearly defined gear relationship, and choose a mechanism for a fictional display.

Use the supplied diagrams and paper calculations. No powered assembly, lifting apparatus, sharp tool, machine connection or physical mechanism test is required. Real building and testing need teacher-approved materials, guarding where appropriate, suitable equipment and direct school observation. The Year 7 placement is editorial within Key Stage 3; online completion is conceptual evidence, not an operating certificate.


Relate gear teeth to direction speed and torque

A mechanical system has an input, a connected mechanism and an output. Rotary motion turns about an axis. Linear motion follows a straight line; reciprocating motion repeats backwards and forwards along a line. Oscillating motion swings to and fro through an angle. Label the actual moving part, because a system may contain more than one type of movement.

A gear is a toothed wheel that meshes with another suitable toothed part. The driver is the input gear in the relationship being studied; the driven gear receives that movement. For a simple external pair on fixed parallel axes, the gears turn in opposite directions when viewed from the same side. The number of teeth passing the contact must match. A larger driven tooth count therefore means fewer output turns for the same number of input turns.

Use explicit labels rather than a bare phrase 'ratio one to three'. In the source example, driver teeth : driven teeth = 15 : 45 = 1 : 3. Here define reduction factor as driven teeth divided by driver teeth:

45/15=3

Output speed equals input speed divided by that reduction factor. At a steady input of 90 revolutions per minute, or rpm:

90/3=30

The output is 30 rpm in the opposite direction. Nine input turns produce three output turns. Input speed : output speed is 3 : 1, while output speed : input speed is 1 : 3. These labelled reciprocals describe the same arrangement. Adding the tooth counts to get sixty does not calculate any of these relationships.

Driver and driven teeth Input speed Output speed Direction relative to input
15 and 45 90 rpm 30 rpm Opposite; one external mesh
45 and 15 90 rpm 270 rpm Opposite; one external mesh
15 then a 30-tooth idler then 45 90 rpm 30 rpm Same; two external meshes

An idler is an intermediate gear on its own axis. With one idler between the same driver and final driven gear, there are two external meshes: the final output turns in the same direction as the input. The idler tooth count cancels from the overall speed ratio in this simple arrangement. This is different from a compound train, where two different-sized gears are fixed to the same shaft and share its rotation.

Jahobr's compound train: a 14-tooth input drives a 42-tooth wheel, fixed to a second 14-tooth gear driving a 28-tooth output. The two stages reduce speed; this is a different example from the 15-to-45 pair.
Jahobr's compound train: a 14-tooth input drives a 42-tooth wheel, fixed to a second 14-tooth gear driving a 28-tooth output. The two stages reduce speed; this is a different example from the 15-to-45 pair.

In the animation, identify the small wheel at the left, the large middle wheel and the smaller gear sharing its axis, then the output at the right. The stage reduction factors are 42 divided by 14 = 3 and 28 divided by 14 = 2. Multiply the factors to obtain 6, not 3 + 2. The output turns one sixth as fast as the input, and two external meshes give the same overall direction. The written description supplies the relationships if animation is unavailable; tooth colours are not needed to use the counts.

Torque is the turning effect of a force about an axis, measured in newton metres, N m. In an ideal loss-free steady gear reduction of three, output torque can be three times input torque while output angular speed is one third. For example, 1 N m at the input corresponds ideally to 3 N m at the output. That is a torque relationship, not a statement that every contact force triples. Real losses reduce useful output power and available torque; the tooth-count speed relationship is a separate geometric relationship while the gears mesh correctly.

The optional ScienceOnline video provides gear context. Every assessed count, assumption and relationship is supplied in writing; no question depends on unreviewed footage or building a powered model.


Trade force against distance with levers and pulleys

A lever is a rigid member that turns about a pivot called the fulcrum. An effort applies an input force and the load exerts a resisting force. A lever arm is the perpendicular distance from the pivot to the force's line of action. It is not automatically the entire length of the bar. To compare turning effects, include both the force and the relevant arm.

Original paper example: assume an ideal balanced lever with a 300 mm effort arm and a 100 mm load arm, with perpendicular forces. A 2 N effort can balance a 6 N load because 2 × 300 and 6 × 100 both give a moment magnitude of 600 N mm. The ideal force ratio is three. This is a stated static model, not a guide to using a real lifting tool or supporting a person. A different pivot location or force direction changes the relationship.

Mechanical advantage is the ratio of output force magnitude to input force magnitude for a defined arrangement. In an ideal machine, a larger force is exchanged for a greater input travel relative to output travel. Work transferred by a constant force along its movement is force multiplied by distance. Useful output work cannot exceed input work plus any decrease in stored energy. For these steady ideal examples, neglect changes in stored energy and losses, so input and output work are equal. Real friction and deformation make some input energy unavailable as useful output work.

Stannered's fixed-pulley diagram: a block on a horizontal surface is linked over a pulley to a hanging block. Tension directions are shown; the surface block also has an opposing friction arrow. This is not the separate movable-pulley example.
Stannered's fixed-pulley diagram: a block on a horizontal surface is linked over a pulley to a hanging block. Tension directions are shown; the surface block also has an opposing friction arrow. This is not the separate movable-pulley example.

The wheel redirects the rope from horizontal to vertical. Read the word labels as well as the arrows. The upward tension arrow on the hanging block and its downward weight arrow identify different actions. The diagram does not supply masses or a complete numerical motion problem. Its friction label also warns against assuming that every pictured situation is an ideal loss-free calculation.

A single ideal fixed pulley redirects the effort without multiplying its magnitude. A movable-pulley arrangement can share a load between supporting rope segments. In a simple ideal case with two vertical segments of the same rope supporting the moving assembly, negligible pulley weight and equal tension, each segment supplies half the load force. Count the supporting segments in the stated geometry rather than merely counting wheels. Angled segments or other reeving arrangements need their own analysis.

For a separate fictional two-segment example, a 6 N load is balanced by 3 N rope tension. Raising it through 0.1 m requires 0.2 m of ideal rope movement at the free end. Input work is 3 × 0.2 = 0.6 joule and output work is 6 × 0.1 = 0.6 joule. The force advantage has not made energy. This is paper arithmetic with ideal assumptions, not an instruction to suspend or lift any actual object.

Compare force and speed questions carefully. A gear's rpm ratio is not by itself a linear output force unless the output geometry is also known. A longer lever arm can reduce the required effort force for a given moment, but the input point travels farther for a given angular change. A pulley may change direction, force ratio, or both depending on arrangement. State the intended output and the assumptions before choosing a mechanism.


Choose a cam or linkage for a repeated display movement

A linkage connects moving links through joints so one movement controls another. A crank is an arm or offset point rotating about a fixed axis. In a crank-slider mechanism, a connecting rod links the crank to a guided slider. Suitable geometry converts continuous crank rotation into reciprocating straight-line movement. The guide constrains the output path; the rod must have room to move. A rotating input alone does not tell you the output travel or the required clearances.

A cam uses its profile, or shaped working surface, to control a follower. The follower is the part that follows that profile. A suitably arranged rotating cam can produce a rise, fall and dwell. Rise moves the follower towards its higher position; fall returns it towards the lower position. Dwell is a finite part of the cycle during which the output remains still while the cam keeps turning. Stroke is the distance between the highest and lowest follower positions. Not every cam profile provides the same sequence or a dwell.

Maintaining the intended contact and guidance matters. A cam follower that separates, catches or wears can change the output. A linkage can suffer from loose joints, interference or a poorly guided slider. Friction, materials, clearances, space and the intended input all affect reliability. A computer animation of ideal geometry is not evidence that a physical assembly works safely.

Original fictional design brief: a paper-only proposal for a small classroom display. A panel should rise and return along a vertical guide, with a short pause at its upper position while the input continues turning. A manual rotary input and a compact enclosure are proposed. No final dimensions, mass, driving torque, materials or safe construction details are supplied, so they remain design questions rather than manufacturing instructions.

Compare two concepts against the same need. A suitable cam-and-follower profile could provide a rise, a deliberate high dwell and a fall, provided contact and guidance are maintained. A simple continuously driven crank-slider provides a repeated forward-and-return stroke, but no finite dwell interval at its endpoints without an added mechanism or a change in the input. It is momentarily at rest at reversal, which is different from staying still over a finite range of continued input rotation.

The cam is therefore the provisional choice for the explicit dwell requirement, not a universal winner. Check whether its full motion fits the enclosure, whether the required follower travel is achieved, whether contact is reliable and whether its materials and accessible moving parts can be approved. If the brief changes to continuous reciprocation with no pause, a suitable crank-slider becomes an alternative worth considering. Neither can be chosen responsibly using appearance alone.

Write a comparison with columns for required motion, force or torque questions, space, reliability and evidence still needed. Distinguish an observed result from a prediction. A label such as 'reliable' needs an agreed test and actual results; three sketches do not prove a lifetime. If real prototypes are later made, the school must approve parts, equipment, guarding and observation before any assembly or movement test.

For transfer, explain why the 15-to-45 speed reduction cannot specify the panel's stroke or safe load. Gears can change the rotary input speed and torque, but the cam profile or linkage geometry determines the output path. Your submission is an annotated system diagram, labelled calculations and conditional mechanism choice. Do not connect a motor, suspend a load or make an operating safety claim from this online work.


Interactive Tasks


Quiz: Test Your Knowledge

For the stated simple external pair what does a 15-tooth driver do to a 45-tooth output? (The output turns once for three input turns in the opposite direction) (!The output turns three times per input turn in the same direction) (!Both always turn once because tooth count is irrelevant) (!The output ratio is sixty because teeth must be added)



What is the labelled input-speed to output-speed ratio in that pair? (3 to 1) (!1 to 3) (!15 to 60) (!45 to 60)



What output speed follows from 90 rpm input and a reduction factor of three? (30 rpm) (!270 rpm) (!90 rpm) (!60 rpm)



What does one simple idler between the same driver and final gear change? (The final direction while the overall tooth-count speed relationship stays the same) (!The final tooth count into the sum of every wheel) (!The system into an unlimited energy source) (!Every gear into a cam follower)



What is the total reduction factor for the pictured compound stages of three and two? (Six) (!Five) (!One) (!Two thirds)



What does torque describe? (Turning effect about an axis) (!Only straight-line distance) (!Energy created by a wheel) (!The number of pulley pictures on a page)



What are the ideal balanced forces for the stated 300 mm and 100 mm lever arms? (2 N effort and 6 N load) (!6 N effort and 2 N load) (!2 N effort and 2 N load) (!No force because the lever has a pivot)



What is true of the separate ideal two-vertical-segment pulley example? (3 N rope tension supports a 6 N load with greater input rope travel) (!3 N tension creates twice the input energy) (!The load moves twice as far as the free end) (!Any two wheels guarantee that same relationship)



What is a cam dwell? (A finite interval with the follower still while the cam continues turning) (!The instantaneous reversal point of every slider) (!A guarantee that all joints are frictionless) (!A third name for adding tooth counts)



Why is the cam a provisional choice for the fictional display? (A suitable profile can provide the required high pause with continued input rotation) (!Any cam guarantees safety regardless of construction) (!The gear ratio alone fixes the panel travel) (!A sketch proves its lifetime reliability)





Memory Game

Driver Input gear in the particular relationship being studied
Driven gear Gear receiving movement from the driver
Torque Turning effect about an axis
Fulcrum Pivot about which a lever turns
Follower Part controlled by a cam profile
Dwell Finite interval with an output still during continued input rotation





Drag and Drop

Rotary motion Turning about an axis
Reciprocating motion Repeating backwards and forwards along a line
Oscillating motion Swinging to and fro through an angle
Simple idler Intermediate gear on its own axis
Compound train Arrangement with different gears fixed to a shared shaft





Crossword Puzzle

DRIVER Input gear in a stated gear relationship
DRIVEN Word describing the gear receiving the movement
TORQUE Turning effect measured in newton metres
FULCRUM Pivot of a lever
FOLLOWER Part that follows a cam profile
DWELL Finite pause in output while input continues to turn





LearningApps

Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.


Cloze Text

Complete the explanation.
The input gear in a stated pair is the

. A turning effect about an axis is

. An intermediate gear on its own axis is an

. A lever turns about its

. Turning about an axis is

motion. Repeated straight-line travel is

motion. The cam profile controls a

. A finite pause while the input turns is a

.



Open Tasks


Easy

  1. Name the motions: Explain rotary linear reciprocating and oscillating movement. Label input and output in a paper diagram of a display mechanism.
  2. Label the ratios: For the fifteen-tooth driver and forty-five-tooth output state the tooth-count ratio reduction factor and both labelled speed ratios. Explain why adding the counts is wrong.
  3. Read the media: Identify the two stages and shared shaft in the gear animation using position and tooth counts. Describe the fixed-pulley picture and its friction arrow without treating it as the separate movable-pulley example.
  4. Explain lever arms: Explain fulcrum perpendicular arm effort and load. Check the two stated turning effects in the paper lever example with units.


Standard

  1. Calculate output movement: Calculate output turns for nine input turns and output rpm for ninety input rpm in the fifteen-to-forty-five external pair. State direction from the same viewing side.
  2. Reverse the pair: Keep ninety input rpm but make the forty-five-tooth gear the driver of a fifteen-tooth gear. Calculate the output speed and explain the ideal torque trade-off without promising actual output power.
  3. Check the pulley work: Calculate input and output work in the stated ideal two-segment case. Explain why lower effort needs more rope travel and does not create energy.
  4. Compare cam and crank: Compare a suitable cam-and-follower with a simple continuous crank-slider against the display requirement for rise return and a high pause. Include space guidance contact and joint questions.


Advanced

  1. Analyse the compound train: Use the two labelled stage tooth pairs to calculate total reduction and overall direction. Explain the difference from a single idler and identify what would change if one gear were not fixed to the middle shaft.
  2. Separate speed torque and force: Critique the claim that every output force must triple whenever output rpm is divided by three. State the role of torque output geometry losses and the intended load.
  3. Distinguish pause and reversal: Explain why an instantaneous zero output speed at the end of a simple crank-slider stroke is not a finite dwell during continued input rotation. Propose a question to check on a paper motion schedule.
  4. Submit a conditional mechanism choice: Submit a system sketch calculations and comparison against movement force or torque space and reliability criteria. Keep actual construction and testing pending for school review and direct observation.



Learning Check

  1. Use unambiguous gear language: Why can the same pair have ratios described as one to three and three to one?
  2. Calculate speed and direction: What happens in the original pair and with a simple idler?
  3. Interpret the animation: How does the illustrated compound train differ from an idler?
  4. Apply ideal work reasoning: Why do the lever and pulley advantages not create energy?
  5. Choose for the stated movement: Why might a suitable cam be preferred for the original display brief?
  6. Judge evidence and limits: What evidence belongs in the final proposal?


Worked checks and assessment guidance

  1. The labelled driver-to-driven tooth counts are fifteen to forty-five or one to three. The defined reduction factor is driven divided by driver teeth giving three. Input speed divided by output speed is three while output divided by input is one third. These reciprocal relationships are consistent when their quantities are named and should not be replaced by an unexplained bare ratio.
  2. Nine input turns give three output turns and ninety input rpm gives thirty output rpm. One external mesh reverses direction when both gears are viewed from the same side. Adding one simple idler creates two external meshes so the final direction matches the input while the same initial and final tooth counts retain the overall speed relationship.
  3. The middle large wheel and small gear are fixed to the same shaft and rotate together. Fourteen driving forty-two gives reduction three then fourteen driving twenty-eight gives reduction two. The factors multiply to six and the two external meshes give matching input and final directions. A simple idler on its own axis does not introduce that additional shared-shaft ratio.
  4. The ideal lever balances equal moment magnitudes using a longer effort arm and a smaller effort force. In the separate ideal pulley case three newtons through two tenths of a metre transfers six tenths of a joule matching six newtons through one tenth of a metre. Real losses and any stored-energy changes must be accounted for rather than claiming unlimited work from a smaller input.
  5. The brief asks for a finite high pause while the input continues rotating. A suitable profile can provide a rise dwell and fall whereas a simple continuously driven crank-slider normally reverses without a finite dwell. The choice remains provisional because follower contact guide behaviour clearances torque materials and safe construction still require evidence and school review.
  6. Submit an annotated mechanism diagram labelled input and output quantities independent arithmetic and a comparison against the actual movement force or torque space and reliability requirements. Separate predictions from observed tests. A digital animation or complete online quiz cannot establish physical assembly reliability safe guarding or practical competence so actual school observation remains a separate requirement.


Learning evidence

Submit labelled motion and gear diagrams with exact tooth-count and speed quantities directions and assumptions. Include the compound-train and reverse-pair calculations and the original lever/pulley arithmetic.

Submit a comparison of cam and crank-slider options for the fictional display with the dwell requirement explicit. State remaining space torque contact guidance and reliability questions. Actual assembly and physical tests stay pending unless directly observed through approved school arrangements. No powered mechanism rope-suspended load tool operation or device connection is required online.


OER and Wikipedia

Department for Education: Design and technology, selected Key Stage 3 mechanical systems — current original body checked. Annual placement and all fictional problems are editorial.

Polytechnic Institute of NYU: Gear Down for Speed, selected gear-ratio and speed/torque explanation — original primary PDF body checked. Driven-teeth divided by driver-teeth convention retained with explicit quantity labels. No robot program, construction instructions, worksheets, source images, historical prices or actual hardware use are adopted.

Carnegie Mellon University: Yi Zhang with Susan Finger and Stephannie Behrens, Introduction to Mechanisms, Chapter 7, selected gear relationships — actual selected original body checked for velocity ratio and external gear arrangement. No source code, tooth-profile manufacturing instructions or software download is required.

OpenStax Physics: Simple Machines, selected ideal work and pulley explanations — actual original body checked. Used to distinguish an ideal force-distance exchange from useful energy creation; no copied textbook task, graphic or lifting activity.

OpenStax College Physics: Simple Machines, selected perpendicular lever-arm and pulley discussion — actual original body checked for force ratios and model assumptions. The two-newton lever and six-newton pulley examples here are original fictional paper calculations, not practical apparatus specifications.

Carnegie Mellon University: Examples of Mechanisms, selected slider-crank and cam explanation — actual original body checked. Basic conversion roles are paraphrased, with clear limits; no claim that every linkage is incapable of every dwell or that every cam can safely realise any motion.

CCEA: Cams and Followers, selected rise/fall/dwell/stroke definitions — actual factfile body checked. Conceptual vocabulary only; no copied examination question or image and no claim that this GCE material defines an England Year 7 curriculum.

Commons: AnimatedGears.gif — Jahobr; CC0 (http://creativecommons.org/publicdomain/zero/1.0/deed.en). Original record and actual preview checked; no image modification by this course.

Commons: Pulley diagram.svg — Recreated by User:Stannered; Public domain (original file record: PD-ineligible). Original record and actual preview checked; no image modification by this course.

AnimatedGears.gif is Jahobr's own work, dated 5 December 2016 in the file record, offered as CC0. Its English description identifies fourteen, forty-two, fourteen and twenty-eight teeth. The German descriptive fraction contains an arithmetic typo; the lesson uses the stated English counts and independent multiplication rather than reproducing that typo. This is a conceptual animation, not a precise manufacturing tooth profile. Pulley diagram.svg is credited literally as Recreated by User:Stannered, dated 20 June 2007, based on the file named in its source field and offered as PD-ineligible. The fixed-wheel image is distinguished from the separate ideal movable-pulley calculation.

ScienceOnline: Gear Basics — fresh title, creator metadata and embed eligibility checked; actual hand-operated gear-model preview seen. No full-film or transcript review, open video licence, download or republication is claimed. The lesson provides a complete written alternative and no assessed answer depends on unseen footage.

The numerical examples, display brief and questions are original teaching material. They do not specify a real machine, verified load rating, complete construction, practical operating qualification or independent expert certification.


Linked learning areas


aiMOOC Projects



Schulfach+




aiMOOCs



aiMOOC Projekte









MOOCwiki · Deutsch

Nach dem Lernen ist vor dem Lernen

Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.

Zur MOOCwiki-Hauptseite

Mediathek

Suche verfeinern

Dein Lernplan bestimmt, was oben steht. Alle anderen Inhalte bleiben erreichbar. Seitenaufrufe beeinflussen die Auswahl nicht.

Inhalte werden geladen ...

Mediathek wird aus dem Wiki geladen ...