Zum Inhalt springen

English:Design & Technology

Aus MOOCsWiki Staging
aiMOOC-Siegel aiMOOC

Design & Technology

QR-Code



Introduction

Engineering design is iterative: a tested idea can return to an earlier stage. Image: Bennett Brown, CC BY 4.0.
Engineering design is iterative: a tested idea can return to an earlier stage. Image: Bennett Brown, CC BY 4.0.

Audience: Learners aged approximately 13–17, beginner makers and introductory vocational students. Time: About 6–9 hours of study plus a small design project. Prior knowledge: No specialist knowledge is needed; basic measuring, simple calculations and responsible tool use are helpful.

Design and technology (D&T) connects creative thinking with practical making. You investigate a real need, describe what a successful solution must do, compare ideas, choose materials and processes, build a model, and test the result. A good product is not necessarily the most complicated one: a low-cost, repairable and comfortable solution can be better than a feature-rich but fragile alternative. D&T draws on Engineering, Art and design, Computing, science, business and environmental thinking.

Your course challenge: Design a useful, accessible, low-waste desk organiser or small assistive device for a particular user. You may substitute another safe, school-approved product. Keep a design journal with a problem statement, two contrasting ideas, dimensions, a prototype, a fair test and one reasoned improvement. Use recycled card or hand tools where digital equipment is unavailable; access to a 3D printer is not required.

Learning outcomes: By the end you can write a measurable design brief; justify material and mechanism choices; explain input-process-output control; move from sketches to prototypes; collect test evidence; and assess environmental and social trade-offs. Follow workshop instructions, wear suitable eye protection when needed, and never experiment with mains electricity or unfamiliar machinery without qualified supervision.

Watch and discuss: The Smithsonian National Air and Space Museum presents the engineering design process through a familiar everyday task. Which steps might you repeat after your first test?


Investigating Needs and Generating Ideas


Users, problems and design briefs

A user is someone who interacts with a product; a stakeholder may also be affected by its cost, production, maintenance or disposal. Begin by observing an activity and asking permission-based, non-intrusive questions. An observation such as “small objects slide off a narrow desk” is more useful than jumping straight to “make a plastic tray”. Define the problem before fixing a solution. Consider different abilities, hand sizes, left-handed use, visibility, cost and the context in which the product will be used.

A design brief states the intended user and purpose. Criteria describe how success will be judged; constraints limit your options. For example, a desk organiser may need to hold six pens upright, fit inside a 20 cm by 15 cm footprint, resist tipping in three repeated trials and use less than 200 g of new material. These numbers are illustrative design targets, not universal standards. Add a budget and a safety requirement. Some criteria conflict; record their priority rather than pretending every goal can be maximised.


Research, creativity and iteration

Research existing solutions for strengths and weaknesses and credit ideas that influence you. Use quick annotated sketches, labels, rough dimensions and arrows to communicate three genuinely different possibilities. A decision matrix can compare user fit, durability, price, ease of manufacture and environmental impact. Scores are a discussion tool, not objective facts: explain the weighting and the evidence for each rating.

The design process is iterative: identify a need, research, imagine, plan, make, test, evaluate and improve. Testing may reveal that a sketch overlooked a force, a user cannot grip a handle, or an assembly takes too long. Revisiting earlier decisions is normal engineering practice, not failure. Checkpoint: Explain to a classmate why your chosen concept meets the user's need better than your rejected alternative.


Materials, Structures and Mechanisms

Five common types of simple machine: a starting point for mechanical design. Image: Rfc1394, CC BY-SA 3.0.
Five common types of simple machine: a starting point for mechanical design. Image: Rfc1394, CC BY-SA 3.0.


Choosing materials for a purpose

Materials have different properties. Cardboard is inexpensive and quick to score or fold, but moisture can weaken it. Plywood is relatively stiff and can be cut accurately with suitable tools, yet exposed edges may need finishing. Metals can be strong and conductive but may be heavy or difficult to process. Many thermoplastics can be reshaped with heat; not all plastics have the same melting behaviour or recycling pathway. Fabrics may be flexible and washable, with performance depending on fibre, weave and finish.

Compare properties relevant to the brief: stiffness, strength, toughness, density, corrosion resistance, electrical conductivity, price, repairability and embodied impacts. Strength concerns resistance to failure; stiffness concerns resistance to deformation. They are not synonyms. A thin stiff sheet can still fail at a weak joint. Test sample strips of equal width and span with small, controlled loads; record deflection, and keep all test variables except the material constant. Stop before breakage if fragments or sharp edges create a hazard.


Forces, mechanisms and manufacturing

A Structure transfers loads. Tension pulls, compression pushes, bending curves a member, and torsion twists it. A triangle often helps stabilise a frame because its angles cannot change without member deformation or joint movement. A Lever trades force for distance around a pivot; gears can change speed, torque or direction. A mechanism should match the user task and be guarded against trapping fingers.

Textile products are also engineered: sewing method, seam allowance, fibre choice and fastener design affect performance and repair. Listen to the historical button-sewing machine below. What repeating mechanism creates its sound? Sound is an observation, not enough evidence by itself to judge quality or safety.

Audio: historical button-sewing machine, Work With Sounds, CC BY 4.0.

Mini investigation: Make two identical-span paper bridges, one flat and one folded into a channel. Add the same small weights in increments and record deflection. Explain why shape changes stiffness even when the material is unchanged. Keep loads low and secure the test area.


Electronics, Sensors and Control

An example breadboard circuit containing a battery, switch, resistor and LED. Diagram: LA2, CC BY-SA 3.0.
An example breadboard circuit containing a battery, switch, resistor and LED. Diagram: LA2, CC BY-SA 3.0.


Circuits, signals and safe testing

An Electrical circuit needs a closed conducting path and an appropriate power source. A LED conducts mainly in one direction and needs suitable current limiting. A resistor helps limit current; the value depends on supply voltage, LED forward voltage and the permitted current. Do not connect an LED straight across a battery without evaluating the current path. For a basic series circuit, the relationship V = I × R gives an approximate resistor voltage drop, current and resistance; component tolerances still matter. Use only approved low-voltage supplies under supervision and disconnect power before rewiring.

An electronic product can be described as input → process → output. An input may be a pushbutton, light sensor or temperature reading. The process applies a rule, perhaps inside a microcontroller. The output may be an LED, buzzer, motor or display. A system also needs a power supply, a robust enclosure and a way to fail safely. Keep wires insulated and avoid short circuits.


Algorithms, feedback and responsible automation

For a night light, a possible rule is: “If the measured light level is below a chosen threshold, switch the LED on; otherwise switch it off.” A single threshold may make the LED flicker near the boundary; using separate on and off thresholds (hysteresis) reduces rapid switching. Describe logic in a Flowchart before implementing it. Test both normal conditions and likely failures such as a loose sensor wire.

Animated concept of a responsive bicycle helmet with movable vents. Visual: Edditive, CC BY-SA 4.0.
Animated concept of a responsive bicycle helmet with movable vents. Visual: Edditive, CC BY-SA 4.0.

This animated prototype illustrates how sensors and actuators can change a product's form. It is a design concept, not evidence of certification as protective equipment. Ask: what happens if the actuator stops moving? What manual override, protective enclosure or safe resting state would be appropriate? Automated products need user control, privacy awareness and testing beyond a successful demonstration.


Modelling, Prototyping and Making

Functional parts made using fused-filament 3D printing. Photograph: Svitlana Lozova, CC BY-SA 4.0.
Functional parts made using fused-filament 3D printing. Photograph: Svitlana Lozova, CC BY-SA 4.0.


Communicating the design

A sketch communicates intent; a technical drawing communicates details needed to make and check a part. Use labelled front, side and top views when appropriate. State measurements and units clearly. A model may be a full-size card mock-up, a scaled foam model or a digital CAD file. CAD helps adjust dimensions and inspect fit, but a precise-looking model is not automatically an accurate or usable product. Measure real components instead of assuming their nominal dimensions.

A tolerance is an allowed variation from a specified size. If a slot is intended to accept a 3 mm sheet, a nominal 3 mm slot may be too tight because of tool accuracy and sheet thickness variation. Use test coupons to determine a sensible clearance. Make a bill of materials and select joints that can be built and inspected with available equipment.


Prototypes, processes and fair tests

A Prototype is a version built to learn something. A low-fidelity mock-up may test reach and size; a functional prototype may test load capacity or control logic. Choose the quickest safe model that answers your question. Additive manufacturing builds objects in layers; cutting and milling remove material; forming and joining change or assemble parts. Each process has advantages and constraints involving precision, time, waste and equipment access.

Animated time-lapse of a 3D printer building a small object layer by layer. RepRapPro and WikiJunkie, CC BY 2.5.
Animated time-lapse of a 3D printer building a small object layer by layer. RepRapPro and WikiJunkie, CC BY 2.5.

Plan a fair test before making the final version. Change one variable at a time, measure with the same method, repeat trials, and record the results even when they contradict your preferred design. For the desk organiser, test stability with the same number of pens and the same sideways push, then ask two users to judge access and comfort. Do not treat two opinions as a representative population survey. When using printers, cutting tools, hot nozzles or adhesives, follow local safety rules and instructor supervision.


Sustainable, Inclusive and Ethical Design

A simplified product life-cycle assessment pathway: materials, manufacture, transport, use and end of life. Graphic: Gid149, CC BY-SA 4.0.
A simplified product life-cycle assessment pathway: materials, manufacture, transport, use and end of life. Graphic: Gid149, CC BY-SA 4.0.


Looking beyond the product at hand

Life-cycle thinking considers impacts associated with raw material extraction, manufacturing, transport, use, maintenance and end-of-life treatment. A product with recycled content is not automatically the lowest-impact choice: durability, repair frequency, energy use and local recycling capability matter. Define a useful comparison, such as “one organiser holding six pens for five years”, before comparing alternatives. Without reliable inventory data, describe potential impacts as hypotheses rather than presenting invented carbon figures.

A circular approach aims to avoid unnecessary waste, retain product and material value, and support regeneration. In practical D&T, this may mean reducing mixed-material joints, using standard fasteners, providing replaceable parts, designing for disassembly and selecting a durable finish. Reuse and repair often preserve more value than breaking a whole product down for recycling, although a life-cycle study is needed to establish the best option in a particular context.

Watch and discuss: The Ellen MacArthur Foundation introduces circular design through an animated explanation. Choose one design change that could extend the life of your project without making it less usable.


Access, ethics and evidence

Inclusive design asks who may be excluded by a grip size, reading level, colour-only warning, high force requirement, cost or inaccessible repair process. Invite feedback from diverse users without collecting sensitive personal details. Respect other people's ideas, acknowledge inspiration and do not copy protected commercial drawings or designs without permission. Consider waste, workers' safety, supply chains and electronic data privacy when relevant.

Write a brief evaluation with three columns in your journal: criterion, test result, next change. For example, if the organiser tips in two of three trials, widen the base and repeat the identical test. Distinguish observations from interpretations. A convincing design presentation shows both the benefits and limitations of the final solution.


Interactive Tasks


Quiz: Test Your Knowledge

Which statement best defines a design constraint? (A limit such as budget or maximum size) (!An optional decorative pattern) (!A guaranteed test result) (!A list of unrelated inventions)




Why should a design brief identify a user? (To connect the solution to real needs and conditions) (!To remove the need to test a product) (!To guarantee the cheapest possible material) (!To replace every drawing with a slogan)




Which test best compares the bending stiffness of two card structures? (Use the same span and load and measure deflection) (!Use different loads without recording them) (!Choose the structure with the brightest colour) (!Measure one sample and assume all are identical)




What does a lever rotate around? (A pivot or fulcrum) (!An electrical resistor) (!A light sensor) (!A recycling label)




What is a typical purpose of a resistor in a basic LED circuit? (To limit current to a suitable level) (!To make a battery provide unlimited power) (!To replace the need for a closed circuit) (!To turn all metals into insulators)




In a sensor-controlled light what is the sensor primarily doing? (Providing an input related to the environment) (!Printing a three dimensional enclosure) (!Storing the life cycle of the product) (!Replacing the power source with a sketch)




Why make a low-fidelity prototype first? (To test an important idea quickly and cheaply) (!To prove that mass production is safe) (!To avoid all later measurement) (!To guarantee a perfect final surface)




What is an engineering tolerance? (An allowed variation from a specified dimension) (!The total price of tools in a workshop) (!The number of users interviewed) (!A colour added only for decoration)




Which action most directly supports easy product repair? (Using accessible standard fasteners and replaceable parts) (!Permanently sealing every component in resin) (!Removing information about spare parts) (!Combining all materials without separation)




What makes a product test persuasive? (Recorded criteria and repeatable measurements) (!Only a confident advertising slogan) (!Disregarding results that show a problem) (!Changing several conditions without notes)





Memory Game

Match each distinct concept with its explanation.

Design brief Statement of purpose and intended user
Constraint A limit on a possible solution
Stiffness Resistance to deformation under load
Sensor Component that detects a condition
Prototype Preliminary model used to learn and test
Tolerance Permitted deviation from a specified dimension
Disassembly Separating joined parts for service or recovery





Drag and Drop

Match the correct design activity to its main evidence or output.

Match the correct terms. Design practice
User investigation Observed need and interview notes
Idea development Alternative annotated concept sketches
Material testing Comparable measurements of physical behaviour
Prototype evaluation Test results against design criteria
Life-cycle thinking Review of impacts from materials to disposal





Crossword Puzzle

Enter the one-word answer to each clue.

Prototype Early version built to investigate a design idea
Constraint Requirement that limits available choices
Resistor Circuit component commonly used to limit current
Tolerance Permitted variation in a specified dimension
Ergonomics Study of how people interact physically with products
Recycling Processing used material to make material available again





LearningApps

Explore related English-language practice activities. Check the relevance of individual results before using them.


Cloze Text

Complete the text.
The purpose of a design

is to describe the problem and its user. A measurable requirement is called a success

. A limit on size or money is a

. Repeating a design cycle after testing is called

. A structure with high

changes shape only a little under a given load. An environmental detector is a

. A current-limiting component in an LED circuit is a

. A preliminary model for checking ideas is a

. An allowed dimensional variation is a

. Maintaining and replacing worn parts supports product

. Life-cycle thinking considers a product's

as well as its manufacture.




Open Tasks


Easy

  1. User research: Observe an everyday design problem, with permission where needed, and write a four-sentence need statement naming the user and situation.
  2. Design brief: Write one design brief, three measurable success criteria and two constraints for a safe desk organiser or assistive product.
  3. Technical drawing: Sketch three different product ideas with dimensions, materials and brief notes; circle the one that best matches your criteria.
  4. Material properties: Test equal-sized samples of two safe materials using the same small load; record a simple results table and one conclusion.


Standard

  1. Design evaluation: Create a weighted decision matrix for your three sketches; explain why you chose each weight and state the uncertainty in your scores.
  2. Model making: Build a full-size card mock-up, ask two volunteers to try it without sharing private data, and document three usability observations.
  3. Basic electronics: With an approved low-voltage kit and supervision, construct or simulate a switched LED circuit; label input, current-limiting component and output.
  4. Product testing: Run three repeatable stability or fit trials on your prototype; graph one result and propose a change based on the evidence.


Advanced

  1. Computer-aided design: Produce a dimensioned CAD model or precise technical drawing of a redesigned part, including a justified assembly clearance.
  2. Engineering analysis: Compare two structural shapes with a controlled deflection experiment; explain the role of geometry, load and test error.
  3. Circular design: Redesign your product for disassembly and repair; compare material, maintenance and end-of-life trade-offs without inventing emissions figures.
  4. Design presentation: Create a short documented design portfolio or narrated project video with the brief, alternatives, testing data, limitations, media credits and next iteration.



Learning Check

  1. Design justification: Explain how one user need, two criteria and a limiting constraint influenced your final product form; support your explanation with sketches or measurements.
  2. Material selection: Compare card, plywood and a suitable polymer for one component; justify the best choice using properties, tools, cost and end-of-life considerations.
  3. Mechanics: Predict how folding a flat sheet into a channel changes bending behaviour and design a fair experiment that could challenge your prediction.
  4. Control system: Draw an input-process-output diagram for a sensor-controlled light and explain how it should behave if the sensor reading fluctuates near the threshold.
  5. Prototyping and tolerances: Describe how you would diagnose a joint that is too tight; specify measurements, a test coupon and a controlled redesign.
  6. Responsible design: Evaluate one trade-off between accessibility, durability and environmental impact, citing evidence and identifying what is still unknown.




Learning evidence

A convincing portfolio contains knowledge: correct use of design, material, force, control, tolerancing and life-cycle vocabulary; skills: observational research, scaled or annotated drawing, safe making, fair testing and data interpretation; products: a design brief, alternatives, a model or prototype, and a dimensioned improvement; and transfer: an explanation of how the same process could improve a different object or service.

Check your own evidence against these criteria:

  1. Relevance: The problem, intended user and measurable criteria are explicit.
  2. Technical reasoning: Material, mechanism and process choices have evidence-backed explanations.
  3. Testing: At least one controlled test includes method, units, observations and a fair interpretation.
  4. Iteration: A documented change responds to a test result or a concrete user need.
  5. Responsibility: Safety, accessibility, repair and realistic environmental trade-offs are considered.
  6. Communication: Sources, image credits, dimensions and limitations can be understood by another learner.




OER and Wikipedia

The English Wikipedia overview of the school subject is provided for contextual reading. Check citations and compare general descriptions with the focused learning materials below.


Further reading and verified video sources


Wikimedia Commons media credits and rights

These are the exact Commons file-page sources for the embedded materials. Credit the creators and comply with each linked Creative Commons licence when reusing them. The course embeds existing files and has not created or altered the source media.


Linked learning areas

Use this navigation table to revisit the main ideas and connect them to related fields.


aiMOOC Projects



Schulfach+




aiMOOCs



aiMOOC Projekte









MOOCwiki · Deutsch

Nach dem Lernen ist vor dem Lernen

Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.

Zur MOOCwiki-Hauptseite

Mediathek

Suche verfeinern

Dein Lernplan bestimmt, was oben steht. Alle anderen Inhalte bleiben erreichbar. Seitenaufrufe beeinflussen die Auswahl nicht.

Inhalte werden geladen ...

Mediathek wird aus dem Wiki geladen ...