English:Chemical formulae, equations and quantitative chemistry - Science Year 10
Introduction

Balance equations, count formula masses and solve original reacting-mass problems with units and explicit assumptions. Check closed and open boundaries, limiting reactants and appropriate precision. Year 10 placement is editorial; mole calculations are signposted extension where required.
Balance formulae with an element-by-element atom audit
A chemical equation is an inventory of atoms as well as a description of change. Reactants appear before the arrow and products after it. A formula identifies a substance or composition ratio, while a coefficient multiplies the whole formula. A missing coefficient means one. The subscript in oxygen O2 belongs to oxygen’s molecular formula; it is not a free adjustment knob for making an equation look balanced.
In the opening methane model, black, white and red represent carbon, hydrogen and oxygen respectively. One methane molecule and two oxygen molecules are represented before the arrow, with one carbon-dioxide and two water molecules afterwards. The display is a model of chemical composition, not a literal photograph of a flame, a time sequence of collision steps or a claim that individual oxygen atoms are red. Complete combustion is the specified reaction; other conditions can give different products.
To balance an equation, first record the correct formulae for the specified substances. Count each element on both sides, alter coefficients, and recount every element after a change. Finally reduce coefficients to their smallest whole-number ratio where appropriate. Changing water H2O to hydrogen peroxide H2O2 would change the substance rather than balance the water equation. A coefficient multiplies every atom in a formula, including atoms within brackets.
| Balanced equation for the specified change | Reactant atom totals | Product atom totals |
|---|---|---|
| CH4 + 2O2 → CO2 + 2H2O | C: 1; H: 4; O: 4 | C: 1; H: 4; O: 4 |
| 2Mg + O2 → 2MgO | Mg: 2; O: 2 | Mg: 2; O: 2 |
| 2Al + 3Cl2 → 2AlCl3 | Al: 2; Cl: 6 | Al: 2; Cl: 6 |
| CaCO3 → CaO + CO2 | Ca: 1; C: 1; O: 3 | Ca: 1; C: 1; O: 3 |
For aluminium reacting with chlorine to form aluminium chloride, two aluminium atoms and six chlorine atoms occur on each side in the displayed ratio. The coefficient three multiplies the two chlorines in each Cl2 molecule. On the product side, two formula units each contain three chlorines. A learner who reads 3Cl2 as five chlorine atoms has added a coefficient and subscript instead of multiplying them.
Coefficients describe ratios of numbers of specified entities or of amounts in moles, not automatically equal masses in grams. Two magnesium atoms react with one oxygen molecule in the stated equation; it does not follow that two grams of magnesium need one gram of oxygen. Different elements and formula units have different relative masses. A balanced equation is a necessary starting point, not the entire reacting-mass calculation.
Atoms of each element are conserved in these ordinary chemical changes, but the number of separately counted molecules or formula units need not remain the same. In the supplied carbonate decomposition, one formula unit is represented before the arrow and a calcium-oxide formula unit plus a carbon-dioxide molecule afterwards. It would be a mistake to force equal counts of formula units rather than equal counts of each element’s atoms.
These equations are paper models, not instructions for burning magnesium, handling chlorine or heating a closed vessel. The supplied formulae and specified reactions define the calculation. A correct atom balance alone does not prove that an arbitrary reaction will occur, establish its speed or make a practical procedure safe.
Check how coefficients change whole-formula atom totals without altering the formulae. Then cover the right-hand totals in our original audit table and reconstruct them. If the animation cannot play, use the supplied four equations and explain each coefficient and subscript aloud. Original: FuseSchool - Global Education, How To Balance Equations - Part 1 | Chemical Calculations | Chemistry | FuseSchool. The written explanations and native tasks work without sound or the external player.
Calculate formula masses, reacting ratios and amounts
Relative formula mass and sample mass answer different questions. Relative formula mass, Mr, is found by adding the relative atomic masses in the numbers specified by a formula. It is a relative comparison and has no unit of grams. A sample mass is a measured or supplied quantity with units such as g. Twice as large a sample does not change the formula mass of the substance.
For every calculation in this course, use these supplied school approximations: H 1, C 12, O 16, Mg 24, Ca 40, Al 27, S 32, Na 23 and Cl 35.5. They are deliberately specified inputs, not new measurements replacing a current reference periodic table. Keep the same set throughout a problem rather than switching between rounded and more precise values mid-calculation.
| Formula | Atoms counted per formula | Relative formula mass from supplied values |
|---|---|---|
| H2O | Two H and one O | 18 |
| MgO | One Mg and one O | 40 |
| CO2 | One C and two O | 44 |
| Ca(OH)2 | One Ca, two O and two H | 74 |
| Al2(SO4)3 | Two Al, three S and twelve O | 342 |
| NaCl | One Na and one Cl in the simplest ionic ratio | 58.5 |
In calcium hydroxide, the two outside the brackets multiplies both O and H: 40 plus two lots of (16 plus 1) gives 74. In aluminium sulfate, the three multiplies the complete SO4 group. Count two aluminium, three sulfur and twelve oxygen atoms: 54 plus 96 plus 192 gives 342. Do not multiply the aluminium by the three merely because it appears earlier in the formula.

For the stated magnesium-oxide reaction, two Mg have total relative contribution 48 and one O2 contributes 32, producing two MgO with total 80. Thus the reacting mass ratio is 48:32:80, which reduces to 3:2:5. Under the stipulated complete reaction with pure substances and adequate oxygen, 3.60 g of Mg uses 2.40 g of oxygen to give a theoretical 6.00 g of MgO. The product mass includes oxygen as well as magnesium.
If the initial oxygen supply is 5.00 g instead, magnesium is limiting in this model. Only 2.40 g of oxygen is used and 2.60 g remains. The initial total is 8.60 g, and the final accounted total is 6.00 g of product plus 2.60 g of unused oxygen. It would be wrong to turn the entire 8.60 g into pure magnesium oxide merely because all matter must be accounted for.
The mole route gives the same answer and is an extension where the course or qualification requires amounts of substance. Using molar mass M in g per mol, amount n in mol is m divided by M. The supplied Mg approximation gives 3.60 divided by 24 equals 0.150 mol Mg. The balanced equation gives one mol MgO per mol Mg, so 0.150 mol MgO has mass 0.150 times 40 equals 6.00 g. The coefficient two cancels in that one-to-one Mg-to-MgO ratio; it must not be applied again to double the product.
One mole specifies an exact count of entities through the Avogadro constant, 6.02214076 times ten to the power twenty-three per mol. State whether the entities are atoms, molecules, ions or formula units. The calculation 0.150 mol Mg corresponds to approximately 9.03 times ten to the power twenty-two Mg atoms to three significant figures, not that many grams. The exact defining constant does not make a three-significant-figure supplied mass infinitely precise.
Audit mass boundaries, yields, units and precision
Mass conservation requires a clear accounting boundary. In a closed accounting model for an ordinary chemical reaction, all initial and final matter is retained inside the chosen system. A gas leaving an open container can reduce the measured container-plus-contents mass without destroying atoms. Oxygen entering from the air can increase that measured mass without creating atoms. Include matter crossing the boundary before judging the conservation claim.
Use this original hypothetical carbonate ledger, not a practical heating instruction. A 60.00 g container initially holds 5.00 g of pure calcium carbonate. With the supplied Ca 40, C 12 and O 16, the relative formula masses are 100 for CaCO3, 56 for CaO and 44 for CO2. Stipulate complete conversion with no other process. The products are therefore 2.80 g CaO and 2.20 g CO2.
If all matter is retained within a mathematical closed boundary, the total is 65.00 g before and afterwards. If the entire 2.20 g of carbon dioxide leaves the weighed container in the alternative open-boundary account, the container and retained solid total 62.80 g. Adding the escaped 2.20 g restores the 65.00 g accounting total. These two accounts describe boundaries, not a recommendation to heat or pressurise a sealed vessel.
A separate check on the magnesium model doubles the reacting quantities: 7.20 g Mg plus 4.80 g oxygen gives 12.0 g theoretical MgO under the same assumptions. The equation conserves the total 12.0 g when both reactants are included. It does not assert that every starting material is fully consumed if a different excess supply is provided, or that a real collection process recovers the entire theoretical product.
Suppose the earlier 6.00 g theoretical product case instead has a dry, pure recovered product mass of 4.80 g. Percentage yield is recovered desired product divided by theoretical desired product, times one hundred: 80.0 percent. That figure alone does not identify whether incomplete conversion, transfer losses or another cause explains the shortfall. An apparently excessive yield can indicate retained water or impurities, so a larger recovered mass is not automatically better chemistry.
Units are part of the method. One gram is one thousand milligrams; one cubic decimetre is one thousand cubic centimetres. In an independent concentration calculation, 10.0 g of solute in a final solution volume stated as 250 cubic centimetres to three significant figures means 0.250 cubic decimetres. Mass concentration is 10.0 divided by 0.250, or 40.0 g per cubic decimetre. The final solution volume is not automatically the volume of solvent added.
Keep mass concentration in g per cubic decimetre separate from amount concentration in mol per cubic decimetre. A molar mass conversion is needed to move between them. Likewise, 3.60 g is 3.60 times ten to the power minus three kg, and the negative exponent does not mean a negative mass. Standard form changes notation, not the amount of material.
Before rounding, estimate the order of magnitude and retain intermediate digits. In the magnesium case, oxygen adds mass, so a theoretical product smaller than the starting magnesium would be suspicious under the stated complete-conversion assumptions. Report 6.00 g from the three-significant-figure case rather than a string of calculator digits. Addition-based mass differences should also respect the stated decimal-place uncertainty rather than blindly applying one rounding rule to every operation.
A final answer should identify the formulae, balanced coefficients, supplied relative masses, reacting ratio or mole step, units, limiting/excess assumption and conservation check. Distinguish a theoretical prediction from an actual observation. None of the fictional data establishes the uncertainty of a particular real balance or certifies that a real experiment has been performed.
Interactive Tasks
Quiz: Test Your Knowledge
What can be changed when balancing an equation for specified substances? (Coefficients multiplying whole formulae) (!Subscripts whenever convenient even if the substance changes) (!The identity of elements to make the totals look equal) (!The number of protons in an element’s atoms)
How many chlorine atoms are represented by 3Cl2? (Six) (!Five) (!Three) (!Two)
What does relative formula mass describe? (A relative sum based on the formula and supplied relative atomic masses, without grams as its unit) (!The actual mass in grams of every possible sample) (!The number of moles always present in a bottle) (!A quantity that doubles when the sample is doubled)
What is Mr of Ca(OH)2 with supplied Ca 40, O 16 and H 1? (Seventy-four) (!Fifty-eight) (!Fifty-seven) (!One hundred and fourteen)
What follows from 2Mg + O2 → 2MgO using supplied Mg 24 and O 16? (The reacting mass ratio Mg:oxygen:MgO is 48:32:80) (!Two grams Mg always require one gram oxygen) (!Magnesium and oxygen have identical masses per mole) (!The oxygen contributes no product mass)
What happens in our 3.60 g Mg with 5.00 g oxygen model? (6.00 g MgO forms theoretically and 2.60 g oxygen remains) (!All 8.60 g becomes pure MgO) (!5.00 g MgO forms and magnesium is created) (!The remaining oxygen must have disappeared)
Why does the alternative open carbonate account weigh 62.80 g? (2.20 g CO2 has left the weighed container; including it conserves the total) (!Atoms were destroyed by being counted as gas) (!The container itself lost all its mass) (!The closed accounting boundary must also have lost exactly the same gas)
What is the yield from dry pure recovered product 4.80 g versus theoretical 6.00 g? (80.0 percent) (!125 percent) (!1.20 percent) (!28.8 percent)
What is the mass concentration for 10.0 g in final volume 0.250 dm3? (40.0 g per dm3) (!0.0400 g per dm3) (!2.50 g per dm3) (!40.0 mol per dm3 without any molar-mass conversion)
What is a defensible interpretation of the mole extension? (0.150 mol Mg identifies an amount of atoms; using the constant gives about 9.03 times ten to the twenty-two atoms) (!0.150 mol means 0.150 atoms) (!The Avogadro constant makes the supplied mass infinitely precise) (!A magnesium-oxide formula unit must always be called a molecule)
Memory Game
| Coefficient | A multiplier applying to the whole chemical formula |
| Subscript | A number within a formula specifying composition |
| Relative formula mass | A relative sum from formula counts and atomic masses |
| Molar mass | Mass per amount of substance, for example grams per mol |
| Limiting reactant | The reactant restricting theoretical product under stated assumptions |
| Percentage yield | Recovered desired product divided by theoretical product times one hundred |
Drag and Drop
| A learner replaces H2O with H2O2 while balancing water formation | Reject the substance change and alter coefficients instead |
| A learner reads Al2(SO4)3 as containing four oxygens | Apply the outside three to the whole sulfate group to obtain twelve oxygens |
| An ionic-lattice picture shows spheres on unit-cell edges | Use shared-boundary conventions and a formula-unit ratio rather than calling each visible pair a molecule |
| A weighed container loses gas to the surroundings | Account for matter crossing the boundary before rejecting conservation |
| A supplied final solution volume is 250 cubic centimetres | Convert it to 0.250 cubic decimetres before a grams-per-cubic-decimetre calculation |
Crossword Puzzle
| COEFFICIENT | What multiplier is written before a whole chemical formula? |
| SUBSCRIPT | What number within a formula indicates composition? |
| REACTANT | What substance appears before the reaction arrow? |
| PRODUCT | What substance appears after the reaction arrow? |
| MOLE | What SI unit measures amount of substance? |
| YIELD | What term compares recovered desired product with its theoretical amount? |
LearningApps
Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.
Cloze Text
Open Tasks
Easy
- Read coefficients and subscripts: Explain the two different roles and audit chlorine in the supplied aluminium equation.
- Find formula masses: Use the supplied approximations for water, magnesium oxide and carbon dioxide.
- State the mass boundary: Explain the difference between an open weighed container and a closed accounting system.
- Keep quantities and units separate: Distinguish relative formula mass, sample mass and amount in moles.
Standard
- Audit all four equations: Count each element independently on both sides and explain why formulae remain unchanged.
- Handle the bracketed formulae: Find the counts and relative masses in calcium hydroxide and aluminium sulfate.
- Reconstruct the magnesium case: Find oxygen used, theoretical product, excess oxygen and both total-mass checks.
- Convert and calculate concentration: Convert the supplied final solution volume and give mass concentration with suitable units and precision.
Advanced
- Use the mole extension: Derive the same magnesium-oxide prediction with m divided by M and the correct equation ratio; specify the counted entities.
- Audit the carbonate ledgers: Calculate the solid and gas masses, then explain both boundary totals without proposing a heating procedure.
- Interpret recovery critically: Calculate the supplied yield, identify possible causes without claiming a unique one, and explain why an apparently excessive yield needs scrutiny.
- Critique a quantitative answer: Check substance identity, atom conservation, limiting assumptions, standard form, unit conversion and precision before accepting a calculator result.
Learning Check
- Equation audit: Multiply complete formulae and conserve each element.
- Formula-mass ledger: Use the supplied relative atomic masses and bracket multipliers.
- Reacting masses and excess: Apply the balanced mass ratio, not the coefficients as gram ratios.
- Amount-of-substance extension: Specify entities and apply the ratio once.
- Carbonate mass boundaries: Track all products and matter crossing the chosen boundary.
- Recovery, units and precision: Separate a prediction, a recovery and an instrument claim.
Worked checks and assessment guidance
- Methane combustion uses coefficients 1,2,1,2 with C one, H four and O four on each side. Magnesium oxidation uses 2,1,2 with Mg two and O two. Aluminium/chlorine uses 2,3,2 with Al two and Cl six. Carbonate decomposition has Ca one, C one and O three each side. Equal counts of molecules or formula units are not required. Changing water into peroxide would change identity rather than balance an equation.
- Water gives 18, MgO 40, CO2 44, Ca(OH)2 74, Al2(SO4)3 342 and NaCl 58.5. Calcium hydroxide has one calcium, two oxygen and two hydrogen atoms per formula. Aluminium sulfate has two aluminium, three sulfur and twelve oxygen atoms; 54 plus 96 plus 192 equals 342. Relative formula mass is dimensionless and does not increase with sample size. A lattice formula expresses a ratio rather than a discrete molecule.
- With supplied Mg 24 and O 16, the equation gives mass ratio 48:32:80, or 3:2:5. Pure 3.60 g Mg uses 2.40 g oxygen and gives theoretical 6.00 g MgO under complete-conversion assumptions. From an initial 5.00 g oxygen supply, 2.60 g remains; initial 8.60 g equals final 6.00 plus 2.60 g. Doubling the consumed reactants gives 7.20 plus 4.80 equals 12.0 g product.
- Amount equals mass divided by molar mass in compatible units. Here 3.60 g divided by 24 g per mol gives 0.150 mol Mg. The Mg-to-MgO amount ratio is one to one, yielding 0.150 times 40 equals 6.00 g MgO, not twice that. The exact Avogadro constant converts 0.150 mol to approximately 9.03 times ten to the twenty-two Mg atoms at three significant figures. This extension does not equate moles with grams or erase input precision.
- The supplied carbonate formula mass 100 divides into CaO 56 plus CO2 44. Complete conversion of 5.00 g therefore gives 2.80 g solid and 2.20 g gas. With the 60.00 g container, closed accounting totals 65.00 g before and after. If all gas leaves the weighed container, its remaining total is 62.80 g; including the escaped 2.20 restores 65.00. These are hypothetical ledgers rather than sealed-vessel heating instructions.
- Recovered dry pure product 4.80 g divided by theoretical 6.00 g times one hundred is 80.0 percent. The value alone does not distinguish incomplete conversion from losses, and excess apparent mass may indicate impurities or water. Final solution volume 250 cubic centimetres, specified to three significant figures, is 0.250 cubic decimetres, so 10.0 g gives 40.0 g per cubic decimetre. 3.60 g is 3.60 times ten to the minus three kg. Retain intermediate digits and round with attention to the stated input precision and operation.
Learning evidence
Retain element-by-element equation audits, six formula-mass calculations, the limiting/excess magnesium ledger and optional mole route, two carbonate system boundaries, yield and concentration working, unit checks and appropriate rounding. Clearly mark supplied approximations and fictional quantities; no real experiment or expert certification is claimed.
OER and Wikipedia
Original atom audits, supplied approximate relative atomic masses, bracketed formula ledger, magnesium and carbonate mass cases, recovery and concentration problems. No source worksheet, demonstration protocol or numerical exercise is copied. Three unchanged Commons originals and the original FuseSchool preview were visually inspected, with attribution, byte and native-image checks.
DfE GCSE combined science, chemical change and mathematical skills scope; amount-of-substance treatment is signposted as extension where required. BIPM: The mole, SI definition and exact defining Avogadro constant. Concept references: OpenStax Chemistry 2e writing and balancing equations, formula mass and the mole and reaction stoichiometry. All case quantities and teaching wording here are original; sources checked 13 November 2026.
Methane-combustion.svg, Yulo1985, CC BY-SA 4.0. Unchanged original; caption and learning activities are original.
Sodium-chloride-unit-cell-3D-ionic.png, Benjah-bmm27, Public domain. Unchanged original; caption and learning activities are original.
Analytical Balance.JPG, Ebultoof, Public domain. Unchanged original; caption and learning activities are original.
Linked learning areas
aiMOOC Projects
Schulfach+


aiMOOCs


aiMOOC Projekte


MOOCwiki · Deutsch
Nach dem Lernen ist vor dem Lernen
Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.
Zur MOOCwiki-HauptseiteMediathek
Mediathek wird aus dem Wiki geladen ...
Keine passenden Inhalte gefunden. Bitte ändere Suche oder Filter.
NEWSLernweltNOAH fragen