English:Chemical analysis, purity and separation techniques - Science Year 10
Introduction
Choose physical separations, audit an original mass ledger, calculate Rf values and interpret selected gas-test records. Distinguish observations, calculations and qualified identification. Year 10 placement is editorial within the GCSE pathway.
Choose separations and track composition, mass and purity evidence
A chemically pure substance contains one chemical substance, which may be an element or a compound. Pure water is a compound, not a mixture merely because hydrogen and oxygen are different elements. A mixture contains more than one substance without those components being fixed together as one new compound in a single composition ratio. A clear solution can be a mixture even when separate particles are not visible to the eye.
The everyday word pure can instead mean natural, clean or without an unwanted ingredient. Those meanings do not establish chemical purity. A formulation is a deliberately designed mixture with components and proportions chosen for a purpose, such as a coating or cleaning product. Calling it a mixture is not a judgement that it is poor quality. Conversely, a single visible colour does not prove only one chemical substance is present.
Choose a physical separation using a relevant property difference and the desired output. Filtration separates a suitable insoluble solid from a fluid; dissolved ions can pass with the solvent. Crystallisation can recover a suitable dissolved solid as crystals. Distillation can recover a volatile component by vaporisation and condensation, with simple or fractional methods selected for the mixture. Chromatography can separate components because they interact differently with mobile and stationary phases. None of these descriptions alone specifies an approved practical procedure.
Use this original ideal mass-accounting case. A mixture contains 30.0 g water, 7.0 g dissolved salt and 5.0 g insoluble sand, totalling 42.0 g. Stipulate no evaporation, no transfer losses and no liquid retained with the separated sand in this simplified ledger. Filtration gives 5.0 g dry sand residue and 37.0 g filtrate containing all the water and dissolved salt. It does not put seven grams of dissolved salt onto the filter paper.
If a subsequent ideal distillation collects 25.0 g of water, the remaining solution contains 7.0 g salt plus 5.0 g water, or 12.0 g. Sand 5.0 plus collected water 25.0 plus remaining solution 12.0 still totals 42.0 g. The remaining material is not yet seven grams of dry salt. In a mathematical complete water-recovery limit, thirty grams of water and seven grams of salt would remain separated, but a real process can retain solvent, lose material or involve other volatile components.

In the model, volatile material changes from liquid to vapour and later condenses into liquid. It is not destroyed or chemically changed into a new element by becoming vapour. A condenser cools vapour; it does not filter dissolved salt out of a liquid stream. Simple distillation is useful for a volatile solvent with a non-volatile dissolved solute, while closer-boiling miscible liquids can need a fractionating approach. Relative volatility, temperature, pressure and composition affect actual separation.
At fixed appropriate conditions, a pure crystalline substance often melts over a narrow range; an impurity commonly changes or broadens the observed range. In an original comparison, sample X melts from 117.0 to 117.5 degrees Celsius and Y from 110 to 118. The ranges are 0.5 and 8 degrees respectively. This supports a difference in purity or behaviour under the specified comparison; it is not unique identification of a chemical, nor a universal claim that every mixture must boil or melt over a broad range. Decomposition, instrument error and special mixtures limit simple rules.
Compare the property difference used by each separation and identify what is actually collected. Apply the original forty-two-gram ledger without importing quantities from the video. If it cannot play, draw a flow diagram with residue, filtrate, distillate and remaining solution, each labelled by composition and mass. Original: FuseSchool - Global Education, How To Separate Solutions, Mixtures & Emulsions | Chemical Tests | Chemistry | FuseSchool. The written explanations and native tasks work without sound or the external player.
Calculate and interpret chromatograms with controlled comparisons
A chromatogram records separation under specified conditions, not a universal fingerprint independent of the method. A mobile phase moves relative to a stationary phase, carrying components that have differing tendencies to move with it or remain associated with the stationary phase. In school paper chromatography, paper supports the stationary phase; a simple account should recognise interactions as well as solubility rather than claiming travel depends only on colour or particle mass.
The opening photograph is a plant-pigment separation with coloured regions extending from an origin line. It has no supplied numerical distance scale for our calculation. The visible streaks do not justify counting every colour shade as one uniquely identified pure chemical. Solvent, stationary material, temperature, sample amount and development conditions affect what can be separated and detected.
For the usual school setup, the baseline is drawn in pencil because a soluble ink line could itself move and contaminate the pattern. The sample origin starts above the solvent level rather than submerged in the reservoir. The solvent front must be marked appropriately for the analysis, and distances are measured from the same origin along the development direction. These are features to recognise in a diagram or approved demonstration, not a recommendation to use an unknown or flammable solvent unsupervised.
The retention factor Rf is the distance moved by a component divided by the distance moved by the solvent front in the same development. Use the centre of a suitably resolved spot consistently. Both distances must have the same units and origin; the ratio is dimensionless. Do not measure from the bottom edge for one and from the baseline for the other, invert the fraction or keep centimetres as the unit of the final ratio.
Here d_s is the spot-centre distance and d_f the solvent-front distance, both measured from the origin.
Use this original synthetic chromatogram record, with a solvent front 8.0 cm from the origin for every lane. Reference substances D, E and F and mixtures M and N were stipulated to share the same conditions. Distances, not colours from the photograph, define the calculation. Draw separate lanes from the supplied values, then cover the final column and reconstruct it.
| Lane or detected component | Distance from origin in cm | Rf with an 8.0 cm front |
|---|---|---|
| Reference D | 2.0 | 0.25 |
| Reference E | 4.8 | 0.60 |
| Reference F | 6.4 | 0.80 |
| Mixture M, spot one | 2.0 | 0.25 |
| Mixture M, spot two | 4.8 | 0.60 |
| Mixture M, spot three | 6.4 | 0.80 |
| Mixture N, spot one | 2.0 | 0.25 |
| Mixture N, spot two | 6.4 | 0.80 |
The 4.8 cm spot gives 4.8 divided by 8.0 equals 0.60. M has three detected spots consistent with D, E and F under these conditions; N has two consistent with D and F. This is evidence for possible matching components, not proof that no other substance could share a value. Rerunning in a different suitable system or adding another analytical method can strengthen identification.
One detected spot is consistent with purity under a method but does not prove it. Components can overlap, remain at the origin, travel with the front or escape the chosen detection method. A colourless component may not be visible without an appropriate approved detection method. Similarly, counting three resolved spots establishes at least three detected components under those conditions, not an absolute census of every chemical in the sample.
A claimed Rf of 1.25 for a resolved spot within a front-tracked school chromatogram should trigger a distance/origin or recording audit, rather than a new universal category of substance that outruns its own solvent front. Values depend on conditions; comparing 0.60 in one solvent with 0.60 in an unrelated solvent is not the same controlled-reference comparison. Small apparent differences also need consideration of spot width and reading uncertainty.
Original publisher: FuseSchool - Global Education, Paper & Thin Layer Chromatography | Chemical Tests | Chemistry | FuseSchool. Identify the mobile/stationary distinction and audit a retention-factor calculation. Retain both movement and stationary-phase interaction in your explanation. If the video cannot play, use our eight-centimetre front and original lanes to explain every fraction and one limit of matching by Rf alone.
Interpret gas-test evidence and report cautious analytical conclusions
An analytical conclusion should connect a named observation with a method and a justified level of confidence. Colour, smell or one unlabelled instrument reading should not be promoted into a certain chemical identity. Use controls, suitable reference information and repeated or complementary evidence where needed. Unknown materials must not be tasted, inhaled or tested with improvised flames; the records below are supplied observations to interpret, not a request to generate or handle gases.
The following original labelled evidence cards use the conventional school interpretations for four selected gas tests. They do not supply a gas-generation recipe or assert that these samples were actually prepared here. Distinguish a glowing splint from a burning one, and describe the precipitate rather than simply saying a test changed.
| Record | Supplied observation under the stated school test | Supported school identification |
|---|---|---|
| A | A glowing splint relights in the supplied controlled observation | Oxygen |
| B | A small gas sample gives a pop with the supplied burning-splint observation | Hydrogen |
| C | Limewater develops a white precipitate in the supplied observation | Carbon dioxide |
| D | Damp blue litmus is bleached white in the supplied observation | Chlorine |
A relighting glowing splint supports oxygen in the school test; a pop in the specified small-sample burning-splint test supports hydrogen. These are different observations and must not be swapped. Carbon dioxide produces a white calcium-carbonate precipitate with limewater in the conventional test. A flame merely going out is not comparably specific evidence for carbon dioxide, because several conditions can stop a flame.
In this limewater account, calcium, carbon, hydrogen and oxygen are conserved and the visible cloudiness is associated with the precipitate. Prolonged excess carbon dioxide can change the mixture further, so a late clear appearance need not mean there was never a positive result. Record timing and the stated conditions rather than treating a single end photograph as a full chemical history.
Damp blue litmus bleached white supports chlorine under the selected school test; acidification can occur before bleaching. Turning blue litmus red alone indicates acidic behaviour rather than specifically identifying chlorine. The damp condition matters, and chlorine must not be identified by deliberate smelling. A dangerous or ambiguous observation is not a reason to escalate into an unsupervised test; use a teacher-provided record or video instead.
An extension in some qualification routes uses damp red litmus turning blue as evidence of an alkaline gas such as ammonia in the relevant context. That observation alone is not an independent measurement of purity or a guarantee that every alkaline gas sample is ammonia. The four core records above remain the assessed gas set in this course; additional ion, flame or instrumental tests depend on the selected chemistry route and need their own method context.
Combine this with the separation evidence. A dissolved salt can remain in a clear filtrate, a distilled fraction can still contain more than one volatile component and a single chromatography spot can conceal overlap. A sample with a narrow melting range and one matching Rf has more supporting evidence than either observation alone, yet both conditions and alternative explanations must still be considered. Do not confuse analysis of a small sample with bulk recovery of every component.
For a final report, state the sample label, chosen separation or test, relevant property difference, observations with units, calculation and conclusion. Separate supplied fictional data from any real observation, name an uncertainty or alternative and propose an appropriate additional evidence source. The goal is a defensible inference, not the longest possible list of tests or a false claim of absolute certainty.
Interactive Tasks
Quiz: Test Your Knowledge
Which sample can be chemically pure despite containing two elements? (Water consisting of one chemical substance) (!Every salt solution because it looks clear) (!Any single-coloured mixture) (!Every formulation because its components have a purpose)
What is the filtrate in our ideal forty-two-gram case? (37.0 g containing water and dissolved salt) (!7.0 g of dry salt on the filter) (!5.0 g of pure water) (!42.0 g with the sand chemically transformed into salt)
What remains in solution after collecting 25.0 g water in the ideal ledger? (7.0 g salt plus 5.0 g water, totalling 12.0 g) (!7.0 g salt with no solvent remaining) (!12.0 g of newly created sand) (!25.0 g water plus every original component)
What does the condenser do in a distillation model? (Cools vapour so a liquid distillate can form) (!Filters dissolved salt from the liquid stream) (!Changes oxygen atoms into hydrogen atoms) (!Proves every collected fraction is absolutely pure)
What is Rf for a 4.8 cm spot and 8.0 cm front from the same origin? (0.60 without a distance unit) (!1.67 centimetres) (!3.2 centimetres) (!38.4 without any reference to the origin)
What do mixture N’s two supplied spots support? (Possible matches with D and F under the same conditions, without absolute identification proof) (!Certain absence of every undetected chemical) (!Proof that E can never share an Rf with another substance) (!An exact chemical census independent of the solvent)
What can one visible chromatography spot establish? (Consistency with one detected component, while overlap or missed detection may conceal others) (!Absolute chemical purity in every solvent and detector) (!A proof of one element rather than a compound) (!The exact number of atoms present)
Which supplied gas observation supports oxygen in the school test? (A glowing splint relights) (!A burning-splint pop is the only oxygen result) (!Damp blue litmus bleaches white) (!Limewater forms a white precipitate)
What gives the conventional positive carbon-dioxide limewater result? (A white calcium-carbonate precipitate) (!A new oxygen atom appearing from nowhere) (!Any flame going out regardless of conditions) (!The liquid turning into sodium chloride crystals)
What distinguishes the selected chlorine observation from acidity alone? (Damp blue litmus is bleached white, rather than only turning red) (!The sample must be identified by deliberate smelling) (!Every acidic gas is necessarily pure chlorine) (!Dry paper turning any colour proves an exact concentration)
Memory Game
| Residue | Material retained by a filter in the selected separation |
| Filtrate | Fluid passing through a filter with any dissolved components |
| Distillate | Condensed volatile material collected during distillation |
| Formulation | A mixture designed with components and proportions for a purpose |
| Mobile phase | The phase moving relative to a stationary phase |
| Retention factor | Spot distance divided by solvent-front distance from the same origin |
Drag and Drop
| A clear salt solution passes through a filter | Keep dissolved salt in the filtrate rather than assume it is trapped |
| The same-origin distances are 6.4 cm for a spot and 8.0 cm for the front | Calculate a dimensionless Rf of 0.80 |
| A sample has one resolved visible spot | State consistency with purity while considering overlap and detection limits |
| A glowing rather than burning splint relights in the supplied record | Associate the school observation with oxygen |
| Damp blue litmus turns red without recorded bleaching | Infer acidity rather than uniquely identify chlorine |
Crossword Puzzle
| FILTRATE | What fluid passes through a filter? |
| RESIDUE | What material is retained by the filter? |
| DISTILLATE | What condensed fraction is collected in distillation? |
| MIXTURE | What contains more than one chemical substance? |
| SOLVENT | What liquid can dissolve a solute and serve as a mobile phase? |
| PURITY | What property is supported but not absolutely proved by one chromatographic spot? |
LearningApps
Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.
Cloze Text
Open Tasks
Easy
- Separate chemical and everyday purity: Explain why pure water is a compound and a clear solution may be a mixture.
- Choose a physical method: Match insoluble solid, dissolved solid and volatile solvent to an appropriate conceptual separation.
- Read the original lanes: Identify the baseline, front and same-origin distances before dividing.
- Match selected gas records: Name the four school interpretations without proposing to generate or taste gases.
Standard
- Audit all separation masses: Reconstruct residue, filtrate, distillate and remaining solution in the lossless forty-two-gram ledger.
- Calculate every Rf: Use the eight-centimetre front for D, E, F, M and N and identify possible same-condition matches.
- Compare purity observations: Calculate both melting ranges and explain what narrow range and single spot can and cannot support.
- Explain the limewater record: Use the balanced precipitate equation, conditions and timing rather than identify gas from flame extinction alone.
Advanced
- Challenge an Rf overclaim: Audit an inverted or greater-than-one ratio, different solvent conditions, overlapping spots and detection limitations.
- Qualify distillation output: Explain why a collected fraction is not automatically a pure substance and why filtration cannot recover dissolved salt.
- Distinguish gas evidence quality: Compare chlorine bleaching with acidity alone and explain the need for controlled supplied observations rather than smell or improvised flame tests.
- Write an analytical report: Combine method, property difference, labelled evidence, units, uncertainty and a complementary evidence source without claiming certainty.
Learning Check
- Purity and method choice: Use chemical composition and a relevant property difference.
- Mass and composition ledger: Track all material under the stated ideal assumptions.
- Chromatogram calculations: Measure spot centre and front from the same origin.
- Purity and distance audits: Calculate before concluding and retain alternative explanations.
- Gas observations: Keep glowing, burning, precipitate and bleaching distinct.
- Defensible reporting: Combine evidence without overclaiming.
Worked checks and assessment guidance
- A pure substance is one chemical substance, possibly an element or compound; pure water is not a mixture because it contains two elements. A formulation is a purposeful mixture. Filtration separates a suitable insoluble solid; crystallisation can recover a dissolved solid; distillation separates by volatility and condensation; chromatography relies on differing phase interactions. Appearance or one colour alone does not establish purity.
- Initial masses are 30.0 g water, 7.0 g dissolved salt and 5.0 g sand, totalling 42.0 g. Ideal filtration with no retained liquid or loss gives 5.0 g dry residue and 37.0 g salt-water filtrate. Collecting 25.0 g water leaves 7.0 g salt and 5.0 g water, or 12.0 g solution; 5.0 plus 25.0 plus 12.0 equals 42.0. The solution is not yet dry salt and real recovery may have losses or other volatile components.
- At an 8.0 cm front, distances 2.0, 4.8 and 6.4 cm give Rf 0.25, 0.60 and 0.80. M has detected spots consistent with D, E and F, while N has two consistent with D and F under the stipulated same conditions. Rf is dimensionless and condition-dependent. A match is supporting evidence, not unique identity proof, and one spot can conceal overlapping or undetected components.
- X has melting range 0.5 degrees Celsius and Y eight degrees in the fictional comparison. Narrower range can support a purity difference but does not identify a compound or exclude decomposition and measurement problems. A 1.25 Rf in the stated front-tracked setup calls for a measurement/origin audit. Baseline contamination, different solvents, unresolved spots and detection limits affect interpretation; the photograph itself has no supplied scale for these numerical data.
- A relighting glowing splint supports oxygen; the supplied small-sample burning-splint pop supports hydrogen. Carbon dioxide gives a white calcium-carbonate precipitate with limewater, described by CO2 plus Ca(OH)2 giving CaCO3 plus H2O. A flame going out alone is less specific. Damp blue litmus bleached white supports chlorine in the selected test, whereas red alone indicates acidity; deliberate smelling is not a method. These are supplied records, not instructions to generate or handle unknown gases.
- Report sample label, separation or test, property difference, actual or supplied observations, units, calculation, conclusion and limitation. Gas-test timing matters; prolonged excess CO2 can alter a previously positive limewater mixture. A distillate may contain several volatile substances and a single spot may hide overlap. Complementary evidence can strengthen identification without making a school exercise an absolute purity certificate or a real completed experiment.
Learning evidence
Retain an ideal separation mass/composition flow diagram, all original Rf calculations and same-condition matches, melting-range differences and four interpreted gas-evidence records. Distinguish supplied fictional quantities from real observations, note method and detection limits, and propose a complementary evidence source.
OER and Wikipedia
Original forty-two-gram separation ledger, synthetic chromatogram lanes, fictional melting intervals, labelled gas-record casework and all tasks and explanations. No source experiment, worksheet or numerical exercise is reproduced. Both unchanged Commons originals and both original FuseSchool previews were actually viewed, with creator, licence, byte, playability and native-image checks.
DfE GCSE combined science, separation and chemical-analysis scope. OpenStax Chemistry 2e classification of matter, concept reference. Royal Society of Chemistry chromatography, phase and interpretation context, and selected gas-test interpretations, used only to check conventional evidence and curriculum context; its experimental scenario is not reproduced. Original wording and case data, sources checked 13 November 2026.
Chromatography rev.jpg, Original: Mattia Luigi NappiDerived: Peter coxhead, CC BY-SA 4.0. Unchanged original; caption and learning activities are original.
Simple distillation apparatus.svg, Original PNG by User:Quantockgoblin, SVG adaptation by User:Slashme, Public domain. Unchanged original; caption and learning activities are original.
Additional original video: Paper & Thin Layer Chromatography | Chemical Tests | Chemistry | FuseSchool, FuseSchool - Global Education; native publisher embedding.
Linked learning areas
aiMOOC Projects
Schulfach+


aiMOOCs


aiMOOC Projekte


MOOCwiki · Deutsch
Nach dem Lernen ist vor dem Lernen
Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.
Zur MOOCwiki-HauptseiteMediathek
Mediathek wird aus dem Wiki geladen ...
Keine passenden Inhalte gefunden. Bitte ändere Suche oder Filter.
NEWSLernweltNOAH fragen