Zum Inhalt springen

English:Sound, ultrasound and transfer of information - Science Year 9

Aus MOOCsWiki Staging
aiMOOC-Siegel aiMOOC

Sound, ultrasound and transfer of information - Science Year 9

QR-Code



Introduction

Outgoing sound and a reflected echo returning to a receiver
Georg Wiora’s schematic separates the outgoing red wave and returning green wave. Its distance r is one way. Sonar uses sound; radar uses electromagnetic waves even when the path geometry is similar. Original calculations use supplied speeds and times.

Compare sound in different media, explain ultrasound and echo timing, and follow acoustic information into a microphone’s electrical signal. Check what a displayed wave or instrument reading represents before interpreting it. Year 9 allocation is editorial within England’s shared KS3 programme.



Separate frequency, speed, wavelength and hearing

Sound requires a material medium. Vibrations produce disturbances that transfer energy through interacting particles. In air and water, the sound considered here is longitudinal: particle displacement is along the direction of propagation, creating moving regions of compression and rarefaction. A pressure-versus-time graph can be sinusoidal without showing particles moving up and down like a rope.

Sound cannot propagate through a vacuum as a mechanical wave because there are no particles to transmit that disturbance. Electromagnetic waves, including radio, do not require the same material medium. The opening schematic illustrates an outgoing and returning path; its shared sonar-or-radar wording does not mean sound and radio are the same kind of wave.

Frequency counts oscillations per second in hertz, Hz, while speed describes how fast the disturbance propagates in metres per second. The source sets a steady wave’s frequency. At a stationary interface, the transmitted wave retains that frequency while its speed and wavelength can change with the medium. Speed is not another name for pitch.

For the original table below, use a steady thousand-hertz source and the supplied model speeds. These are illustrative inputs, not precision measurements or universal constants for every air temperature, liquid or solid. A longitudinal mode in one solid is specified because solids can support more than one wave type.

Supplied medium model Speed / m per s Frequency / Hz Wavelength / m
Air model 340 1000 0.34
Water model 1500 1000 1.50
Solid model, longitudinal mode 5000 1000 5.00

λ=vf

Air gives a wavelength of 0.34 m, water 1.50 m and the specified solid model 5.00 m. Frequency remains one thousand hertz in this comparison. The particular examples have increasing speed, but they do not establish that every solid is faster than every liquid or gas. Material stiffness, density, wave mode and conditions matter; closer particle spacing alone is not a complete explanation.

For humans, roughly twenty hertz to twenty kilohertz is a conventional introductory hearing-range comparison, with substantial individual and age-related variation. Ultrasound conventionally means frequencies above twenty kilohertz. It is high-frequency sound, not a separate kind of energy and not something that necessarily travels faster than lower-frequency sound in the same approximately non-dispersive medium.

Many bats use ultrasonic signals in echolocation, while other animals have different hearing ranges and sensing abilities. Do not infer that every animal hears the same range or that every inaudible signal is harmless. Frequency, intensity, duration and the listener’s response are separate considerations. Larger amplitude at the same frequency and comparable conditions generally increases perceived loudness, but hearing also depends on frequency and the listener.



Interpret echoes, delays and ultrasound applications

An echo returns after reflection. A pulse travels from a transmitter to a reflecting object and back to a receiver. If the receiver is next to the transmitter, the reflector is stationary and the same speed applies both ways, the measured propagation time covers twice the one-way distance. Divide the total travelled distance by two.

d=vt2

The original table gives three independent teaching cases. Times are supplied propagation delays after emission, not one-way times or intervals beginning halfway through the journey. No value is taken from the schematic or a clinical instrument.

Independent case Supplied speed / m per s Round-trip propagation time / s One-way distance / m
Air wall model 340 0.50 85
Water reflector model 1500 0.080 60
Solid test model 6000 0.000020 0.060

For the air wall model, 340 multiplied by 0.50 gives 170 m travelled out and back, so the wall is 85 m away. For the water reflector model, 1500 multiplied by 0.080 gives 120 m total path, so the one-way distance is 60 m. For the solid case, 6000 multiplied by twenty microseconds gives 0.120 m total path and 0.060 m one-way distance, or six centimetres.

A timer can include electronics delay as well as sound propagation. Suppose the water case instead displays 0.082 s, including a known 0.002 s equipment delay. Subtract the equipment delay first, leaving 0.080 s and the same sixty-metre model distance. Using the raw display would incorrectly give 61.5 m. Calibration and the defined start-and-stop events matter.

If the propagation delay is stipulated to be 0.080 s with a bound of plus or minus 0.002 s, and the supplied speed is treated as exact, the corresponding distances span 58.5 to 61.5 m. This is an interval from stated model bounds, not a confidence interval inferred from repeated measurements. Uncertainty in speed would require an additional allowance.

Reflection and absorption can occur together. A soft lining can absorb part of a sound wave’s energy and reduce an echo, while shape and direction affect how much reflected sound reaches a receiver. A weak or absent received echo does not prove there is no object: attenuation, poor coupling, orientation, timing and instrument sensitivity may also explain the observation.

Ultrasonic pulse-echo principles support distance sensing, industrial defect detection and professional medical imaging. Different materials and boundaries return different signals. A simplified echo calculation does not identify a medical condition or certify that a real component is safe. Professional equipment uses appropriate controls and interpretation; the tasks here analyse supplied values rather than prescribing device settings or physical tests.



Follow microphone conversion and signal changes

A microphone converts an acoustic disturbance into an electrical signal. A sound wave makes a diaphragm vibrate. In a moving-coil dynamic microphone, that diaphragm moves an attached coil in a magnetic field, generating a changing electrical signal. The signal corresponds to aspects of the acoustic vibration; the air particles do not travel down the wire to a recorder.

Other microphone designs use different conversion mechanisms. A condenser microphone uses changes in capacitance, an electrical property affected by the spacing of a diaphragm and a backplate, with suitable electronics. Identifying one moving-coil model is not proof that all microphones contain the same parts or need the same powering arrangement. This is a conceptual account, not an instruction to open or wire equipment.

Observe the vibration demonstrations and connect source, medium and detector. A drawn sine wave represents a measured quantity against time or position; it is not necessarily the path of an air particle. Use the original supplied values in the tasks, not an unscaled video frame, for calculations. Original: FuseSchool - Global Education, Sound Wave Experiments | Waves | Physics | FuseSchool. The written explanations and native tasks work without sound or the external player.

In a signal chain, a microphone output may be amplified, recorded and transmitted. A loudspeaker performs a different conversion, using an electrical signal to produce mechanical vibration and then sound. Distinguish the sound wave in the room, the electrical signal in a circuit and any radio transmission used by a wireless system.

Our original signal example describes a five-hundred-hertz tone represented by an ideal microphone voltage with a peak magnitude of 0.020 V. An ideal amplifier with voltage gain two produces a peak magnitude of 0.040 V while keeping the five-hundred-hertz frequency. The higher voltage is not evidence that the source pitch has doubled or that the original acoustic pressure doubled.

To compare acoustic amplitudes from recorded voltages, the microphone sensitivity, amplifier gain, distance, direction and recording settings need to be known or controlled. Two plots with different gain cannot automatically establish that one source was louder. If the amplifier clips, the waveform is distorted rather than remaining a perfect scaled copy. Our ideal gain example explicitly excludes clipping and noise.

Digital recording represents a changing electrical signal by sampled values after suitable conversion. A recording can preserve information about timing, frequency content and changes in amplitude, but a microphone alone does not understand words or decide whether a statement is true. Interpreting speech and evaluating its meaning are further processes beyond acoustic-to-electrical conversion.

Ultrasound can also transfer information even when humans cannot hear it. In an air model with speed 340 m/s, a forty-kilohertz signal has wavelength 0.0085 m, or 8.5 mm. Higher frequency gives a shorter wavelength at the same speed, but detectability, attenuation and instrument response still matter. Inaudible does not mean nonexistent, infinitely penetrating or safe at every intensity. Use simulations and supplied records for the learning tasks rather than testing hearing or emitting intense sound.



Interactive Tasks


Quiz: Test Your Knowledge

Which description fits the sound considered in air and water? (A longitudinal mechanical disturbance requiring a material medium) (!An electromagnetic wave that needs no particles) (!Particles tracing a transverse sine curve merely because a pressure graph is curved) (!A wave whose speed and frequency are the same quantity)



What wavelength follows from one thousand hertz and the supplied air speed? (Zero point three four metres) (!Three hundred forty metres) (!One thousand metres) (!Zero point zero zero one metres)



What changes for the supplied steady wave transmitted into the stationary water model? (Its speed and wavelength change while source frequency stays the same) (!Its frequency must become fifteen hundred hertz because speed is fifteen hundred) (!Its speed always becomes zero) (!Its frequency changes into metres per second)



What does ultrasound conventionally mean? (Sound above twenty kilohertz relative to the conventional human range) (!Any sound that is louder than a speaker) (!Electromagnetic radiation that always travels through a vacuum) (!Sound that every animal is unable to detect)



Why is the pulse-echo travel distance divided by two in these cases? (The stated propagation delay includes travel to the reflector and back) (!Sound always travels at half its stated speed) (!The receiver measures only a quarter of a pulse) (!Every reflection halves the frequency)



What one-way distance follows from the original water case? (Sixty metres) (!One hundred twenty metres) (!Twelve metres) (!Six hundred metres)



What is the corrected propagation time for the supplied displayed delay and known equipment delay? (Zero point zero eight zero seconds) (!Zero point zero eight four seconds) (!Zero point zero zero two seconds) (!Zero point eight two seconds)



What can explain an absent echo besides absence of an object? (Absorption, orientation or receiver limits) (!Sound travelling without any medium in all cases) (!A guarantee that all pulses have infinite range) (!A proof that the source frequency is zero)



What happens in a moving-coil dynamic microphone? (A vibrating diaphragm moves a coil in a magnetic field to generate an electrical signal) (!Air particles travel through the wire to the recorder) (!The microphone directly understands the meaning of each word) (!Every microphone converts sound using the same design and power arrangement)



What does the ideal gain-two example do to the supplied tone? (Double voltage peak from zero point zero two to zero point zero four volts without changing frequency) (!Double frequency from five hundred to one thousand hertz) (!Prove that the original acoustic pressure doubled) (!Remove every possible source of distortion in real equipment)





Memory Game

Frequency Oscillations per second, measured in hertz
Wavelength Spacing of corresponding points in a travelling wave
Echo A received reflection of a sound disturbance
Ultrasound Sound above the conventional upper human hearing range
Microphone A transducer converting acoustic effects into an electrical signal
Absorption Transfer of wave energy into the material or other stores





Drag and Drop

A pulse returns to a nearby receiver Count both outward and return journeys
A timer includes an equipment delay Subtract the known delay before the distance calculation
A sound crosses a stationary material boundary Keep source frequency while using the new propagation speed
A microphone plot has a larger electrical amplitude Check gain and calibration before inferring a louder source
A receiver detects no returned pulse Consider attenuation and geometry before concluding no object exists





Crossword Puzzle

ECHO What is a received reflected sound called?
FREQUENCY What quantity counts oscillations per second?
ULTRASOUND What high-frequency sound lies above the conventional human upper range?
MICROPHONE What device changes acoustic effects into an electrical signal?
DIAPHRAGM What vibrating membrane drives a moving-coil microphone?
ABSORPTION What process transfers wave energy into a material or other stores?





LearningApps

Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.


Cloze Text

Complete the explanation.
Sound in air requires a material

. Its disturbance is mainly

. A source’s oscillation rate is its

. Corresponding compression spacing is the

. A received reflection is an

. The original pulse delay includes an outward and a

path. A known equipment delay needs

. A microphone diaphragm moves a

in the dynamic model. Ideal gain changes voltage

. Understanding words requires more than acoustic signal

.



Open Tasks


Easy

  1. Interpret the sound graph: Explain why a sinusoidal pressure graph does not mean an air particle follows a transverse rope path.
  2. Check the medium table: Calculate each wavelength from its supplied speed and common source frequency.
  3. Compare hearing terms: Explain frequency, pitch, amplitude and the conventional ultrasound boundary with appropriate limits.
  4. Trace the echo: Use the schematic to explain why the one-way distance is half the total propagation path.


Standard

  1. Calculate the echo cases: Check all three original one-way distances, converting the solid case to centimetres.
  2. Correct the timer: Calculate the water-model distance before and after subtracting the known equipment delay and identify the error.
  3. Use the stipulated bound: Find the distance interval from the supplied propagation-time bound while treating speed as exact.
  4. Explain microphone conversion: Trace sound to diaphragm, moving coil, electrical output and recording without making air travel in the cable.


Advanced

  1. Compare a boundary claim: Explain what happens to frequency, speed and wavelength in the supplied transmission comparison and why the example is not a universal material ranking.
  2. Audit missing echoes: Compare absence of a reflector with absorption, poor coupling, orientation, timing and receiver sensitivity as alternative explanations.
  3. Analyse signal gain: Check the ideal voltage and frequency result, then explain why changed gain, clipping or calibration can prevent a direct loudness inference.
  4. Transfer the pulse model: Compare sensing, industrial and professional medical applications, naming the data and controls needed beyond a simplified distance calculation.



Learning Check

  1. Medium and wave quantities: Keep frequency distinct from propagation speed.
  2. Hearing and ultrasound: Bound the comparison.
  3. Echo paths: Check each supplied case.
  4. Delay and uncertainty: Separate assumptions from measured confidence.
  5. Microphone and ideal gain: Trace conversion without inventing understanding.
  6. Applications and evidence: Avoid conclusions from one missing or simplified signal.


Worked checks and assessment guidance

  1. Sound in the stated air and water models is longitudinal and requires material particles. With the common one-thousand-hertz source, supplied speeds three hundred forty, fifteen hundred and five thousand metres per second give wavelengths zero point three four, one point five and five metres. A stationary interface preserves source frequency; these examples do not prove a universal speed ranking for all materials or conditions.
  2. A conventional introductory human range is roughly twenty hertz to twenty kilohertz, with individual variation. Ultrasound is sound above that conventional upper boundary, not necessarily louder sound or a different energy type. Many bats use ultrasonic echolocation, but different animals have different ranges. Forty kilohertz at the supplied air speed gives zero point zero zero eight five metre wavelength, or eight point five millimetres.
  3. One-way distance equals speed multiplied by the round-trip propagation time and divided by two. The air case gives eighty-five metres, the water case sixty metres and the solid case zero point zero six metre, or six centimetres. The source and receiver are taken as adjacent and the reflector stationary, with the same propagation conditions on both legs.
  4. Subtracting the known zero point zero zero two second equipment delay from the zero point zero eight two second display gives zero point zero eight zero second propagation time and sixty metres. Using the raw value would give sixty-one point five metres. With exact supplied speed and a stipulated two-millisecond propagation bound, distance spans fifty-eight point five to sixty-one point five metres. This is not a confidence interval derived from repeated observations.
  5. The moving-coil microphone’s sound-driven diaphragm moves a coil in a magnetic field and generates an electrical signal. Other designs can use capacitance changes. The ideal gain-two example changes a zero point zero two volt peak to zero point zero four volts, retaining five hundred hertz. It does not prove doubled source pressure or pitch. A microphone detects and converts; understanding language requires further processing.
  6. Ultrasound can support distance sensing, defect detection and professional imaging. Weak or absent echoes may reflect attenuation, poor coupling, orientation, timing or sensitivity rather than absence of an object. Medical image interpretation and component acceptance require professional procedures beyond this model. Distinguish acoustic waves, electrical signals and radio links, and do not assume inaudible sound is safe at any intensity.


Learning evidence

Retain a medium-and-wavelength comparison, three checked echo paths, a corrected-delay and interval calculation, and a labelled microphone signal chain with a gain audit. State the supplied values, instrument assumptions and limits of each application claim.


OER and Wikipedia

Original medium speeds, echo cases, delay correction, stipulated bounds and ideal signal-gain example, with original tasks and worked feedback. The unchanged Commons sonar diagram was inspected on white to check its labels and paths; the actual original FuseSchool preview and source bytes were checked. No clinical settings, patient data or physical testing claim is included.

OpenStax College Physics: Speed of sound, frequency and wavelength, quantities and material dependence consulted. OpenStax College Physics: Ultrasound, high-frequency acoustic principles and pulse-echo applications consulted, without adopting treatment settings. NHS: Ultrasound scan, professional imaging context consulted; no diagnostic advice is supplied. Shure: Microphone transducers, original manufacturer explanation of dynamic and condenser conversion consulted, without adopting product claims or wiring instructions. DfE Science programme, shared KS3 objectives. Reviewed 13 November 2026.

Sonar Principle EN.svg, Georg Wiora (Dr. Schorsch), CC BY-SA 3.0. Unchanged original; caption and learning activities are original.


Linked learning areas


aiMOOC Projects



Schulfach+




aiMOOCs



aiMOOC Projekte









MOOCwiki · Deutsch

Nach dem Lernen ist vor dem Lernen

Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.

Zur MOOCwiki-Hauptseite

Mediathek

Suche verfeinern

Dein Lernplan bestimmt, was oben steht. Alle anderen Inhalte bleiben erreichbar. Seitenaufrufe beeinflussen die Auswahl nicht.

Inhalte werden geladen ...

Mediathek wird aus dem Wiki geladen ...