English:Scientific enquiry, laboratory safety and measurement - Science Year 7
Introduction

How can a careful measurement support a fair comparison? Choose apparatus and units, distinguish a hazard from a risk, read a scale and evaluate a complete set of virtual cooling data. You will show calculations and explain why a control or improvement matters.
All numerical results and investigation conditions below are fictional teaching data. Work with the supplied records and written plans. Any actual laboratory work needs the teacher’s induction, current risk assessment and direct supervision; online answers do not demonstrate real apparatus handling. Year 7 is an editorial placement within the shared KS3 science programme.
Select quantities, apparatus and risk controls
A question determines the measurement. If you compare how two cups affect cooling, you need a defined temperature change over a defined time, not simply a photograph of a cup. State the quantity, suitable apparatus, unit and conditions. An observation records what is noticed or measured; an explanation proposes why it happens. A model represents selected features and leaves others out. Keep those roles distinct when making a scientific argument.
| Quantity | Apparatus choice | Unit language | Measurement check |
|---|---|---|---|
| Length | Ruler or suitable tape; choose range and scale for the object | metre, m; often cm or mm in school | Align the intended zero and read the end without changing the reference. |
| Mass | A balance suitable for the load | kilogram, kg; often g in school | Check the zero and account for a container; mass is not the same quantity as weight. |
| Time | Stopwatch or suitable timer | second, s | Define the start and finish events and consider reaction delay. |
| Temperature | A suitable thermometer or sensor | kelvin, K, is the SI base unit; Celsius, °C, is also used | Use the school-approved range and placement; a change of 1 °C equals a change of 1 K. |
| Liquid volume | A suitable graduated cylinder among the stated choices | cubic metre, m³, is the derived SI unit; often cm³ or mL | Choose adequate capacity and suitable graduations; do not infer exact accuracy from shape alone. |
The SI provides a shared system of units. Length, mass, time and thermodynamic temperature have base units m, kg, s and K. Volume is derived from length and can be expressed in m³. School measurements also commonly use cm, mm, g, cm³, mL and °C as appropriate. A balance reports mass; weight is a force, not another name for mass. A temperature interval of 7 °C equals 7 K, but an absolute reading of 25 °C is not 25 K.
Hazard and risk are connected but different. A hazard is something with the potential to cause harm. Risk concerns the chance and seriousness of that harm in the actual circumstances. A broken edge is a hazard; the risk depends on who could contact it and how it is handled. A control changes the circumstances to reduce the chance or consequence of harm. Writing safe in a method is not itself a control.
| Situation or hazard | Who could be harmed and how | Control or action to consider |
|---|---|---|
| A cracked glass container | Cuts to anyone handling it or nearby if it breaks | Do not use it; alert the teacher and keep clear while the authorised person replaces or deals with it. |
| A liquid spill beside equipment | Slipping or contact with an unidentified substance; possible risk to equipment | Stop, tell the teacher and follow the local procedure. Do not touch, smell or mix an unknown spill. |
| A proposed warm-water comparison | Spills or hot surfaces could harm hands or eyes, depending on actual conditions | The teacher must choose and assess the actual conditions, apparatus, handling and protection before any practical work. |
| A trailing sensor cable | Someone could trip or pull apparatus from a bench | Plan a clear working area and teacher-approved cable arrangement; check that the control works. |
Risk management includes identifying hazards, considering who could be harmed, choosing controls, recording significant decisions and reviewing whether the controls work. This general framework supports thinking; it is not a complete laboratory risk assessment or permission for a learner to improvise an experiment. The actual school procedure and responsible teacher determine materials, apparatus, protection and emergency arrangements.

An instruction to use eye protection must refer to appropriate equipment for the actual risk; ordinary prescription spectacles are not automatically an equivalent substitute. Controls also include eliminating an activity, changing the arrangement or using safer conditions. If instructions or labels are unclear, stop and ask. Do not touch unknown substances, deal with broken glass yourself or continue after noticing a problem simply to finish a result table.
Read scales and preserve units
Match capacity, scale and purpose. The source task is to choose apparatus for a 25 cm³ liquid measurement. In the comparison below, 25 cm³ means 25 mL. A container must have enough capacity, but a larger container is not automatically a better measuring tool. Use the stated graduations and intended range. Calibration, condition and technique also affect accuracy; the word cylinder alone does not guarantee a perfect reading.
| Option | Supplied apparatus description | Reasoning about the 25 mL target |
|---|---|---|
| A | 100 mL beaker, marks 10 mL apart | Can hold 25 mL, but its stated marks offer a coarse volume estimate. |
| B | 50 mL cylinder, marks 1 mL apart | Adequate capacity and finer divisions for the stated 25 mL target. |
| C | 100 mL cylinder, marks 5 mL apart | Adequate capacity but coarser divisions than B. |
Among these options, choose B. Its capacity exceeds 25 mL and its 1 mL divisions allow a finer reading than 5 mL or 10 mL divisions. A volumetric pipette might be preferable for another accurately specified task, but it is not one of these options and requires appropriate training. The real introductory photograph instead shows a 500 mL cylinder marked in 5 mL divisions; do not claim that photograph documents option B or an actual 25 mL reading.
Read intervals, not just printed numbers. Suppose two labelled marks are 20 and 30 mL, with five equal spaces between them. Each space represents (30 − 20) ÷ 5 = 2 mL. A level three spaces above 20 is 26 mL. Count spaces, not the number of marks including both ends. If the required value lies between graduations, do not invent several digits of certainty. State what the scale can support and use the teacher’s agreed recording convention.
For a water-like liquid forming a concave meniscus in clean glass, use the bottom of the curve at eye level while the cylinder stands upright on a level surface. Looking from above or below can shift the apparent reading: this is parallax. Different liquids may form different curves, so do not turn a water example into an unqualified rule for every substance. In this course no unknown liquid is to be handled.
Original scale schematic. These are model reference levels, not a photograph or a drawing of the full curved surface. The arrow marks the stated lowest point for this example.
30 mL |---- 28 mL |---- 26 mL |---- <-- model meniscus minimum 24 mL |---- 22 mL |---- 20 mL |----
Convert units while preserving the quantity. One centimetre cubed equals one millilitre. A litre is 1000 mL, and a metre cubed is 1000000 cm³ because 100 cm is cubed in three dimensions. Do not apply a length conversion only once to a volume. Keep the original and final unit visible so that a physically unreasonable answer can be noticed.
| Given quantity | Calculation | Equivalent or interval |
|---|---|---|
| 245 mm | 245 ÷1000 | 0.245 m |
| 125 g | 125 ÷1000 | 0.125 kg |
| 2.5 min | 2.5 ×60 | 150 s |
| 25 cm³ | 25 ×1 | 25 mL |
| 25 mL | 25 ÷1000 | 0.025 L |
| 25 cm³ | 25 ÷1000000 | 0.000025 m³ |
| 32 °C minus 25 °C | 32 −25 | 7 °C temperature rise, also 7 K |
Scale resolution describes the smallest displayed increment, such as a digital balance changing in 0.1 g steps. Accuracy concerns closeness to the relevant true or reference value; precision concerns the closeness of repeated results. A balance with a persistent zero error can give closely grouped but inaccurate readings. Repeating an unchanged mistake does not remove it. A finer display is useful only when the instrument and method support the claimed measurement.
Plan variables and analyse repeat measurements
Original virtual investigation: cooling in two cup materials. Question: under the stipulated equal conditions, does material A or B show a greater temperature decrease in 180 s? The model starts each run at 40 °C with 25 cm³ water and a stated room temperature of 20 °C. These are fictional records for analysis, not instructions to heat or pour water. A real teacher-led investigation would first need suitable conditions and a current assessment of the actual equipment and handling.
| Variable role | Definition in this virtual case | Why it matters |
|---|---|---|
| Independent variable | Cup material, represented by A or B | This is the planned comparison, not a change in water volume. |
| Dependent variable | Temperature decrease after 180 s | Calculate initial minus final temperature; record both measurements. |
| Control variables | Starting temperature 40 °C, volume 25 cm³, time 180 s, room conditions, cup dimensions and sensor position | These are stipulated equal in the virtual model; actual equality must be checked in a real school investigation. |
| Repeats | Three fresh runs for each material | Each virtual run starts again at 40 °C; repeat readings of one completed run are not three independent cooling trials. |
Cup dimensions, exposed surface, room conditions, starting temperature, volume and sensor position are stipulated equal to focus the comparison on material. In an actual experiment, simply claiming all these are the same is not enough: the method should explain what is checked and how. If cup shape changes as well as material, the evidence cannot isolate material alone. A control variable is a condition kept comparable; it is not the same thing as an independent variable you deliberately change.
One virtual run followed through time.
| Time /s | A temperature /°C | B temperature /°C |
|---|---|---|
| 0 | 40 | 40 |
| 60 | 37 | 38 |
| 120 | 34 | 37 |
| 180 | 32 | 35 |
At 180 s, A has decreased by 40 − 32 = 8 °C and B by 40 − 35 = 5 °C. The initial reading matters: comparing final temperatures alone could mislead if the starts differed. The time-course table describes run 1 only. It does not provide unrecorded intermediate readings for the other runs, and the straight segments someone might draw between points would be an interpolation rather than additional measurements.
Three fresh virtual runs at the same final time. Every run starts again at 40 °C. The first row matches the 180 s entries above.
| Run | A final /°C | A decrease /°C | B final /°C | B decrease /°C |
|---|---|---|---|---|
| 1 | 32 | 8 | 35 | 5 |
| 2 | 33 | 7 | 34 | 6 |
| 3 | 31 | 9 | 36 | 4 |
For A, mean final temperature is (32 + 33 + 31) ÷ 3 = 32 °C and mean decrease is (8 + 7 + 9) ÷ 3 = 8 °C. For B,mean final is (35 + 34 + 36) ÷ 3 = 35 °C and mean decrease is (5 + 6 + 4) ÷ 3 = 5 °C. The difference in mean decreases is 3 °C. Each set of final temperatures has a range of 2 °C. Report the units and distinguish final temperature from temperature decrease.
These supplied results support a greater mean decrease for A under this model’s conditions. They do not prove that all cups of every shape behave this way, that the material identity is known, or that a small difference would remain clear under every measurement uncertainty. The dataset supplies no named material or microscopic mechanism to verify. A cautious explanation can relate cooling to energy transfer while keeping the actual material comparison bounded.
Repeats reveal variation and can improve an estimate of a mean. They do not automatically correct a thermometer that reads every temperature 2 °C too high. In a separate later set, 32, 33 and 20 °C would prompt a review of timing, labels, starting conditions and sensor placement. Do not delete 20 merely because it disagrees; retain the reading and any evidence of a procedural problem, and discuss an appropriate further run with the teacher.
Write an evaluable method and transfer the reasoning
Write a method another person could understand. Name the question, what changes, what is measured, the units, conditions kept comparable, timing, repeats and the relevant handling arrangements. A numbered list is useful when the sequence matters. It should state actual decisions rather than repeat use the apparatus safely. Here you are producing a written plan for discussion; only the responsible teacher can approve a real school practical.
| Stage | Decision | What the plan must make clear |
|---|---|---|
| 1 | State the question and controls | Compare temperature decrease for A and B over 180 s, with the stated equal conditions. |
| 2 | Check permission and apparatus | Actual work requires the teacher’s current risk assessment, approved prepared conditions, handling instructions and protection. This is a written planning exercise. |
| 3 | Define the measurements | Record initial temperature, start the agreed timer at the defined event and record the final temperature at 180 s in °C. |
| 4 | Repeat comparably | Use three fresh virtual runs per material with the same starting conditions; retain every reading and any observation about a problem. |
| 5 | Process transparently | Calculate each decrease, then the mean for each material, with units; review unusual results instead of deleting them automatically. |
| 6 | Conclude within the evidence | Compare the results for these stated conditions, name one uncertainty and propose an improvement that addresses it. |
An apparatus rationale for this case might read: a suitable graduated cylinder is chosen for 25 cm³ because its stated divisions are finer than the supplied beaker’s; a thermometer within the approved range records initial and final temperatures in °C; a timer measures 180 s from a defined event. The same relevant volume, starting conditions and measurement position are retained between materials. This explanation links choices to a question rather than assuming every laboratory instrument is interchangeable.
Watch an agreed section of the Amoeba Sisters’ original General Lab Safety animation. Identify one hazard and a control actually mentioned, then connect the general idea to your teacher’s local induction. The video and this course are preparation, not permission for unsupervised experiments or proof of practical competence. Original: Amoeba Sisters, General Lab Safety. The written explanations and native tasks work without sound or the external player.
Transfer: assess a measurement record. Three fictional readings of the same strip by one person with the same ruler are 110, 112 and 111 mm. Their mean is 111 mm = 0.111 m and range is 2 mm. The readings show variation. A verified reference check later reveals that the chosen zero point made every reading 2 mm too large. If that same additive error applies to each, the corrected readings are 108, 110 and 109 mm, mean 109 mm = 0.109 m. The range remains 2 mm: a constant shift changes accuracy relative to the reference, not the spread.
More repeats of the unchanged zero mistake would not remove that bias. Correcting the reference position addresses the identified cause. This is why an improvement must match the problem: use eye-level viewing for parallax, check the zero for a zero error, define events for timing and retain relevant controls for a fair comparison. Choosing smaller digital increments alone does not establish that a result is accurate.
Build a claim-evidence-reasoning response. Claim: A shows a greater mean temperature decrease in these supplied runs. Evidence: mean decreases are 8 °C and 5 °C, a difference of 3 °C, with the stated equal starts and final time. Reasoning: comparing changes over the same interval addresses the question more fairly than comparing unmatched endpoints. Limitation: actual equality of conditions and instrument accuracy are assumed in this virtual model, not independently measured by the learner.
Retain the apparatus rationale, unit conversions, scale explanation, labelled variables, transparent calculations, a risk-aware method and the corrected ruler case. Add a specific improvement and explain why it helps. Any later actual practical evidence must be recorded only after the teacher observes the relevant handling; watching an animation or solving the online tasks cannot establish that it happened.
Interactive Tasks
Quiz: Test Your Knowledge
Which apparatus best matches the stated 25 mL target among the supplied options? (The 50 mL cylinder with 1 mL divisions) (!The 100 mL beaker with 10 mL divisions because every larger vessel is more precise) (!The 100 mL cylinder with 5 mL divisions because more capacity always improves accuracy) (!Any unmarked cup because unit labels are unnecessary)
What is a hazard in the broken-container example? (The cracked glass edge with potential to cause a cut) (!The mean temperature calculated from three runs) (!A guarantee that every person will be injured) (!The unit symbol for time)
Five equal spaces separate 20 mL and 30 mL. What is each space? (2 mL) (!5 mL) (!10 mL) (!6 mL)
What is 25 cm³ expressed in m³? (0.000025 m³) (!0.25 m³) (!25000000 m³) (!25 m³)
What is the independent variable in the virtual cooling comparison? (The cup material represented by A or B) (!The temperature decrease calculated after the run) (!The fixed 180 s interval kept comparable) (!The shared 25 cm³ volume)
Which are the mean decreases for A and B? (A 8 °C and B 5 °C) (!A 32 °C and B 35 °C as decreases) (!A 5 °C and B 8 °C) (!A 40 °C and B 40 °C)
What does a set of close repeat readings alone fail to prove? (That an unchanged systematic zero error is absent) (!That the values can be recorded with units) (!That a numerical range can be calculated) (!That the readings have a small spread)
What is an appropriate response to the separate unusual 20 °C reading? (Retain it, examine the method and records, and discuss an appropriate further run) (!Delete it automatically because the preferred pattern matters more than evidence) (!Change it silently to 32 °C so the table looks tidy) (!Call it a new material identity without any evidence)
If all strip readings are 2 mm too high, what happens after correction? (The mean moves down by 2 mm while the range stays 2 mm) (!The range must double because the mean changed) (!Repeating the same zero mistake automatically corrects it) (!All readings become exactly equal)
What can this digital course demonstrate by itself? (Understanding and analysis of supplied data and written plans) (!Directly observed safe handling of actual school laboratory equipment) (!Permission to handle unknown substances at home) (!A completed real experiment merely because an animation was watched)
Memory Game
| Hazard | Something with the potential to cause harm |
| Risk | The chance and seriousness of harm in the actual circumstances |
| Resolution | The smallest displayed measurement increment |
| Accuracy | Closeness to the relevant true or reference value |
| Precision | Closeness of repeated results to one another |
| Control variable | A relevant condition kept comparable during the planned test |
Drag and Drop
| Material A or B | The deliberately changed variable in the cooling case |
| Temperature decrease after 180 s | The measured outcome calculated from the two temperature readings |
| 25 cm³ water each run | One condition stipulated equal between materials |
| Three fresh runs per material | Repeats revealing variation in the virtual comparison |
| Checking the ruler zero | An improvement addressing the stated additive error |
Crossword Puzzle
| HAZARD | What has the potential to cause harm? |
| RISK | What combines likelihood and seriousness in the circumstances? |
| MENISCUS | What curved liquid surface may be read at eye level? |
| RESOLUTION | What describes the smallest displayed increment? |
| PRECISION | What concerns the closeness of repeated results? |
| ACCURACY | What concerns closeness to the relevant reference value? |
LearningApps
Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.
Cloze Text
Open Tasks
Easy
- Match quantity, apparatus and unit: Choose suitable equipment and units for length, mass, time, temperature and volume, explaining one limitation.
- Explain a hazard and control: Use one supplied situation to identify who might be harmed, how and what action reduces the risk.
- Read an imagined scale: Explain the value of a division between 20 and 30 mL with five equal spaces, then locate 26 mL.
- Convert and check: Convert 245 mm, 125 g, 2.5 min and 25 cm³ into the units used in the worked table, retaining each calculation.
Standard
- Justify the apparatus choice: Explain why option B suits the stated target better than A or C without claiming perfect accuracy.
- Label the cooling variables: Identify independent, dependent and relevant control variables and explain why unmatched shapes would weaken the material comparison.
- Process the repeat data: Calculate every temperature decrease, each mean and range, then state a bounded conclusion.
- Write a risk-aware method: Produce a numbered planning sequence with units, timing, comparable starts, fresh repeats and teacher approval of actual handling.
Advanced
- Critique an unusual reading: Review the separate 32, 33, 20 °C set without deleting a value automatically; name evidence to inspect and a justified next step.
- Evaluate accuracy and precision: Use the strip readings and verified additive error to show why correcting the mean does not change the range.
- Choose a cause-matched improvement: Distinguish zero error, parallax, reaction delay and uncontrolled cup shape, matching each to a meaningful improvement.
- Complete an unfamiliar measurement review: Use a new teacher-supplied dataset to justify apparatus, units, controls and a conclusion, distinguishing analysis from actual practical competence.
Learning Check
- Apparatus and unit choice: What makes the 50 mL cylinder a reasoned choice here?
- Scale and conversion: Resolve the scale and 25 cm³ examples.
- Risk-aware planning: What is missing from the instruction use glassware safely?
- Cooling-data calculation: Calculate the mean changes and their difference.
- Repeat and error review: Why not delete an unusual result or trust repeats automatically?
- Transfer and competence: Explain the ruler correction and the practical boundary.
Worked checks and assessment guidance
- Among the stated options it has adequate capacity for 25 cm³ = 25 mL and 1 mL graduations finer than the alternatives. The real photo is a 500 mL cylinder with 5 mL divisions, not option B. Range, calibration, condition and technique also matter. Use m, kg, s and K for the relevant SI base quantities, with m³ derived for volume; school cm³, mL, g and °C must be labelled correctly.
- Between 20 and 30 mL, five equal spaces give 2 mL per space, so three spaces above 20 is 26 mL. 25 cm³ = 25 mL = 0.025 L = 0.000025 m³. The cubic conversion uses 100³ = 1000000 cm³ per m³, not a single length factor. Read a water-like concave meniscus at eye level under the stated conditions; the original scale schematic marks 26 mL without depicting the full curved surface.
- It does not identify the actual hazard, who might be harmed, the control, responsibility or local handling procedure. A cracked container is not used; the teacher is told and authorised handling follows. Unknown spills are not touched or mixed. The actual school assessment selects conditions, apparatus, protection and supervision. Written analysis and a video do not authorise an unsupervised practical.
- All virtual runs start at 40 °C. A final readings 32, 33, 31 give decreases 8, 7, 9 and mean 8 °C; B final 35, 34, 36 give decreases 5, 6, 4 and mean 5 °C. Mean final temperatures are 32 °C and 35 °C. The difference in mean decreases is 3 °C; each final-temperature range is 2 °C. This supports a larger mean decrease for A in the stated model, not every possible real cup.
- Repeats reveal spread, but a persistent zero error may remain in every reading. An unusual value prompts review of timing, labels, starts and measurement position, with the original record retained. A justified additional run needs the teacher’s arrangements. Changing a result to fit a preferred pattern or deleting it merely for disagreement makes the evidence less trustworthy.
- Readings 110, 112, 111 mm have mean 111 mm and range 2 mm. A verified +2 mm error applying to all gives 108, 110, 109 mm, mean 109 mm and the same 2 mm range. Correcting the zero addresses bias; finer display alone does not. Retain calculations, apparatus rationale, variables, method and improvements. Real safe handling requires actual teacher observation and cannot be inferred from digital completion.
Learning evidence
Retain a quantity-apparatus-unit rationale, hazard/risk/control map, scale reading, unit conversions, labelled cooling variables, all supplied repeat calculations, a bounded conclusion, a risk-aware written method and the corrected ruler example. These are digital analysis records; actual practical handling may be recorded only after direct teacher observation under school arrangements.
OER and Wikipedia
All cooling and ruler data, apparatus options, scale intervals, calculations, planning examples and tasks are original fictional teaching materials. No physical experiment or observed laboratory competence is claimed. The actual cylinder photograph is 500 mL with 5 mL divisions, not the hypothetical 50 mL, 1 mL option. Protective eyewear in a photograph is not a certification of suitability. The labelled scale schematic is original and represents reference levels, not the full curved surface or actual measured apparatus. The Amoeba Sisters animation is embedded from its original publisher for selected observation; full video not watched by the author.
Department for Education: England science programme, Key stage 3 Working scientifically, apparatus, units, variables, evidence and risk evaluation. Year 7 allocation is editorial. BIPM: the International System of Units, base units and comparable measurement. HSE: steps needed to manage risk, general hazard/risk/control/review framework; this does not replace the actual school’s assessment and supervision. Pearson iLowerSecondary science teacher guide, apparatus choice and water-meniscus reading. Reviewed 13 November 2026.
Measuring cylinder hg.jpg, Hannes Grobe 19:05, 3 September 2006 (UTC), CC BY-SA 2.5. Unchanged original; caption and learning activities are original.
Laboratory protection goggles-blue.jpg, Lilly_M, CC BY-SA 3.0. Unchanged original; caption and learning activities are original.
Linked learning areas
aiMOOC Projects
Schulfach+


aiMOOCs


aiMOOC Projekte


MOOCwiki · Deutsch
Nach dem Lernen ist vor dem Lernen
Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.
Zur MOOCwiki-HauptseiteMediathek
Mediathek wird aus dem Wiki geladen ...
Keine passenden Inhalte gefunden. Bitte ändere Suche oder Filter.
NEWSLernweltNOAH fragen