English:Metals, the reactivity series and displacement - Science Year 8
Introduction

Use reaction evidence to order selected metals, predict a possible displacement and explain the change at particle level. Connect a simplified series with carbon-based extraction while distinguishing that hot oxide model from reactions in aqueous salt solutions.
All reaction outcomes and mass examples are supplied teaching records. Do not mix metal salts, handle reactive metals, make gases or heat oxides/carbon. Analysis of a diagram or equation is not practical competence. Year 8 placement is editorial within England's shared KS3 programme.
Build a reactivity order from evidence
A reactivity series summarises chemical evidence. In this course, a more reactive metal is more readily oxidised in the selected comparisons: its atoms tend to form positive ions by losing electrons. This is a chemical relationship, not a ranking of hardness, density, price or usefulness. Magnesium can be more reactive than copper without being denser or more valuable.
The following selected school series runs from more reactive near the top towards less reactive near the bottom. It includes carbon and hydrogen as useful comparison points; neither becomes a metal by being included. Omitted elements have not been declared unreactive or placed outside chemistry.
| Order in the selected school series | Element |
|---|---|
| 1 | Potassium |
| 2 | Sodium |
| 3 | Calcium |
| 4 | Magnesium |
| 5 | Aluminium |
| 6 | Carbon |
| 7 | Zinc |
| 8 | Iron |
| 9 | Hydrogen |
| 10 | Copper |
| 11 | Silver |
| 12 | Gold |
Carbon's position is useful for a simplified comparison involving reduction of some metal oxides. Hydrogen is a reference for selected metal reactions with suitable dilute acids. Neither insertion gives permission to predict every aqueous reaction from one list alone. In particular, carbon is not treated as a metal supplying ordinary metal ions in the salt-solution table.
More reactive does not mean that every reaction is always immediately visible. Conditions, temperature, concentration, surface area and protective surface layers can affect what is observed. Aluminium, for example, can be protected by an oxide layer despite its position in a series. The list is a model for specified comparisons rather than a universal speed scale.
Build an order from positive evidence. Suppose an appropriately specified supplied observation says zinc displaces copper from copper sulfate. This supports zinc above copper for that comparison. If iron also displaces copper, that alone does not decide whether zinc is above iron: both could lie above copper in either relative order. You need another comparison or a suitable reference.
The more complete original matrix below supplies outcomes for selected clean metals and aqueous sulfate solutions under a common stated comparison model. 'No' means no displacement in that model, not that every conceivable reaction is impossible. 'No net displacement' marks a metal with its own ions.
| Added solid metal | Magnesium sulfate | Zinc sulfate | Iron(II) sulfate | Copper(II) sulfate |
|---|---|---|---|---|
| Magnesium | No net displacement | Yes | Yes | Yes |
| Zinc | No | No net displacement | Yes | Yes |
| Iron | No | No | No net displacement | Yes |
| Copper | No | No | No | No net displacement |
Read a row by keeping the added metal fixed. Magnesium displaces the other three; zinc displaces iron and copper but not magnesium; iron displaces copper but not zinc or magnesium; copper displaces none of the other three. Together these comparisons support magnesium > zinc > iron > copper. Read a column to compare which added metals displace the same dissolved metal.
This ordering uses the full set of supplied outcomes, not just colour or a single unsuccessful observation. In a real investigation, oxide coatings, an unsuitable salt, an insufficient observation period or other conditions could obscure evidence. A negative observation should be qualified and checked rather than automatically made a universal law.
Explain displacement through ions and electrons
Displacement changes chemical form. The phrase 'zinc replaces copper' does not mean that a zinc atom turns into a copper atom or that two pieces of metal physically exchange positions. Zinc atoms become dissolved zinc ions, while dissolved copper ions gain electrons to become copper metal. The sulfate group remains in the solution comparison; it is not converted into copper.
For the supplied zinc/copper sulfate example, the word equation is zinc + copper sulfate → zinc sulfate + copper. The formula equation uses the specified copper(II) and zinc compounds:
The total number of each kind of atom is unchanged: one zinc, one copper, one sulfur and four oxygens on both sides. The original copper in the solution is in ions, not tiny visible pieces of copper metal dissolved as if they retained every property of the solid.
At an optional particle-level extension, the net ionic change is:
Both sides have total charge +2. The sulfate ions are spectators in this model, meaning that they are not changed in the net redox process; it does not mean they are absent or that ions never affect a solution's properties. These are aqueous ions and a metal surface, not a chemical equation requiring an external battery.
Track the electron transfer. Oxidation means electron loss and reduction electron gain. Zinc supplies the electrons lost as its atoms become ions. Copper ions accept them as copper metal forms.
Adding these two half-equations cancels two electrons. No electron surplus is created and no proton count changes. The half-equations support the net ionic explanation; the full salt formula equation and the word equation describe the same chosen reaction at different levels.
Use the original FuseSchool displacement animation to relate a series to possible reactions and product names. Distinguish its illustrative demonstrations from our supplied matrix; do not infer that watching is handling a chemical. Carbon extraction requires a different stated setting from an aqueous salt comparison. Original: FuseSchool - Global Education, Displacement Reactions | Environmental Chemistry | FuseSchool. The written explanations and native tasks work without sound or the external player.
In a supplied observation, copper deposition may produce a reddish-brown solid and a copper(II)-containing solution may lose some blue colour as ions are consumed. Such observations can support the model alongside suitable identity evidence, but colour alone does not prove every product. Partial reaction need not remove all blue colour, and unreacted metal may remain.
For copper placed in zinc sulfate under the stated model, predict no displacement because copper is below zinc. Do not write the reverse equation as if it must happen merely because both names occur in the same formula. The series tells you the likely direction for this selected comparison; actual conditions and possible competing reactions remain relevant.
Use carbon comparisons and conserve mass
Keep carbon extraction separate from aqueous displacement. In a simplified school model, carbon can remove oxygen from the oxides of some metals below carbon in the series when appropriate hot reaction conditions are provided. Metals above carbon are not normally extracted from their stable oxides by this simple route; other methods, such as electrolysis for selected reactive metals, are used. Industrial chemistry includes additional conditions and methods beyond the list.
For the specified zinc oxide/carbon model, the supplied equation is:
Zinc, oxygen and carbon atoms are conserved. Oxygen transfers from the oxide to carbon in this equation; carbon monoxide forms. Other systems or conditions can give carbon dioxide or mixtures, so name the supplied product instead of assuming every carbon reaction has one universal gas. Carbon monoxide is toxic, and this is an equation-analysis model, not instructions to heat substances or operate a furnace.
In the selected series, aluminium is above carbon, while zinc, iron and copper are below. That supports the school's extraction distinction, not a claim that carbon can be dropped into a room-temperature zinc sulfate solution to produce zinc by the same simple rule. Carbon is a non-metal comparison point and its detailed chemistry is not identical to zinc becoming Zn²⁺.
Check mass as well as names. The original rounded reacting-mass record below refers to the zinc/copper sulfate equation. Only amounts of the four changing substances are listed; unchanged solvent and any excess are outside this small accounting table and would need inclusion in a whole-apparatus measurement. These values are an invented stoichiometrically consistent teaching example, not a recipe or a measured trial.
| Changing substance | Rounded reacting mass/g | Side of equation |
|---|---|---|
| Zinc consumed | 6.5 | Reactant |
| Copper sulfate consumed | 16.0 | Reactant |
| Zinc sulfate formed | 16.1 | Product |
| Copper formed | 6.4 | Product |
The reactant total is 6.5+16.0=22.5 g, and the product total is 16.1+6.4=22.5 g. The zinc consumed does not have to equal the copper formed gram for gram. Their atoms have different masses; the dissolved compound masses change too. Comparing only the two solid masses would omit part of the accounting.
The illustrative values use rounded relative masses Zn65, Cu64, S32 and O16: equal formula amounts of zinc and copper involve 65 versus 64 mass units, while their sulfate compounds involve 161 versus 160. This checks the chemical proportions without claiming that every actual balance measurement has exact decimal precision.
A solid strip may lose atoms to solution while gaining a deposited metal. Its final mass alone cannot always identify how much of each process occurred, especially with incomplete reactions or material loss. A mass-conservation model is stronger when it states the system boundary and every relevant substance rather than hiding liquid changes.
Judge evidence and predictions. To evaluate an unfamiliar case, identify the added metal and the metal ions in the specified compound, compare their positions in an appropriate series, propose products only if the selected model predicts displacement, then check atoms and charge. State conditions and what is observed separately from what is inferred.
A complete written explanation can include a matrix-derived ranking, a word/formula/particle description, a carbon-extraction qualification and a transparent mass check. None of these alone demonstrates safe laboratory practice, proves an exact reaction rate or allows every chemical system to be reduced to one unqualified order.
Interactive Tasks
Quiz: Test Your Knowledge
Which order follows from the supplied four-metal matrix? (Magnesium then zinc then iron then copper) (!Copper then iron then zinc then magnesium) (!Zinc then copper then magnesium then iron) (!All four must be equally reactive)
Why does zinc displace copper in the selected comparison? (Zinc is more readily oxidised while copper ions are reduced) (!Zinc atoms turn into copper atoms) (!Copper creates protons for zinc) (!A denser metal must always win)
What does carbon’s inclusion in the selected series mean? (It is a non-metal reference for specified oxide-extraction comparisons) (!It has become a metal) (!It is an ordinary dissolved metal ion in every sulfate solution) (!It must displace every metal in cold water)
What happens to sulfate in the chosen net ionic model? (It remains unchanged as spectator ions in the solution) (!It becomes copper atoms) (!It vanishes from matter conservation) (!It supplies new zinc protons)
Which electron statement matches zinc oxidation? (Zinc loses two electrons to form a two-plus ion) (!Zinc gains two protons) (!Zinc becomes a copper nucleus) (!Zinc destroys all electrons)
What is predicted for copper in zinc sulfate under this model? (No displacement) (!Guaranteed zinc-metal formation) (!A universal explosion) (!A compulsory hydrogen reaction)
Why can a visible negative result need qualification? (Surface layers and conditions can affect what is observed) (!No observation is ever useful) (!The series is based on price) (!Atoms can change identity to hide a reaction)
Which selected metal lies above carbon in this extraction model? (Aluminium) (!Zinc) (!Iron) (!Copper)
What total do both sides of the supplied reacting-mass record have? (22.5 grams) (!6.4 grams) (!16.0 grams) (!A mass that must disappear)
What gas is named in the specified ZnO plus C equation? (Carbon monoxide) (!Oxygen) (!Hydrogen) (!Every carbon reaction must make only carbon dioxide)
Memory Game
| Reactivity series | An evidence-based order for specified chemical comparisons |
| Displacement | A more reactive metal forms ions as a less reactive metal is produced from its ions |
| Oxidation | Loss of electrons |
| Reduction | Gain of electrons |
| Spectator | An ion unchanged in a stated net reaction model |
| Conservation | Atoms, charge and properly bounded mass are accounted for |
Drag and Drop
| Zinc atoms forming positive zinc ions | Oxidation by electron loss |
| Copper ions forming copper metal | Reduction by electron gain |
| Sulfate unchanged in the selected net reaction | Spectator ions remain present |
| Carbon above zinc but below aluminium | A qualified oxide-extraction comparison |
| A surface layer obscures a visible response | A limitation of interpreting one negative observation |
Crossword Puzzle
| COPPER | Which metal forms from its ions in the main displacement example? |
| CARBON | Which non-metal is a reference for the selected extraction model? |
| ELECTRON | Which particle is transferred in the redox explanation? |
| SULFATE | Which compound group is unchanged in the main net reaction? |
| REDUCTION | What is electron gain called? |
| OXIDATION | What is electron loss called? |
LearningApps
Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.
Cloze Text
Open Tasks
Easy
- Read a matrix row: Explain zinc’s four supplied outcomes without confusing the added metal and dissolved ions.
- Use the selected series: Place magnesium, aluminium, carbon, zinc, iron and copper in the stated order while identifying the non-metal.
- Name the displacement products: Write the zinc/copper sulfate word equation and identify which metal becomes dissolved ions.
- Check the mass totals: Calculate both 22.5-gram totals and explain why zinc consumed and copper formed need not have equal masses.
Standard
- Derive the four-metal ranking: Use the full matrix to justify the order and distinguish positive evidence from a qualified negative observation.
- Check atoms and charges: Audit the formula, ionic and two half-equations, cancelling electrons correctly.
- Predict a reversed comparison: Explain copper in zinc sulfate using positions, products and the limits of the stated conditions.
- Separate extraction settings: Use carbon’s position to explain a school oxide-reduction distinction without inventing an aqueous carbon displacement.
Advanced
- Identify an underdetermined order: Explain why zinc above copper and iron above copper alone cannot order zinc versus iron, then state a needed comparison.
- Evaluate an obscured observation: Discuss how an oxide coating, surface area or observation time can affect visible evidence without redefining chemical reactivity as speed.
- Audit a strip-only mass claim: Explain why a deposited/partly dissolved strip’s mass alone omits solution changes and may not measure a complete reaction.
- Submit a reactivity evidence note: Combine a matrix-derived ranking, qualified prediction, particle/electron account, carbon model and conserved mass with no claim of a performed practical.
Learning Check
- Ordering from outcomes: Derive and qualify the selected four-metal ranking.
- Atom and ion account: Explain zinc/copper sulfate without transmutation.
- Electron and charge account: Combine the two half-equations.
- Carbon reference: Use the supplied extraction model cautiously.
- Mass and system boundary: Check the illustrative reacting-mass record.
- Prediction and practical status: Evaluate a claim that the hardest or fastest-looking metal always displaces another.
Worked checks and assessment guidance
- Magnesium displaces zinc, iron and copper; zinc displaces iron and copper; iron displaces copper; copper displaces none of the other three. These supplied comparisons support Mg>Zn>Fe>Cu. Two separate observations that zinc and iron each displace copper do not alone determine Zn versus Fe. Negative observations must retain their stated conditions and surface/measurement limitations.
- Zn+CuSO4 gives ZnSO4+Cu, conserving Zn1 Cu1 S1 O4. Zinc atoms become Zn²⁺ while Cu²⁺ becomes copper metal. The sulfate ions remain in solution and cancel from the chosen net redox description; they do not disappear. Nuclear proton counts do not change.
- Zn forms Zn²⁺ plus two electrons, while Cu²⁺ gains two electrons to form Cu. The electrons cancel; net Zn+Cu²⁺ gives Zn²⁺+Cu with total charge +2 on each side. Zinc is oxidised and copper ions reduced. This describes direct displacement without requiring an external battery.
- Carbon is a non-metal between aluminium and zinc in this selected school series. Under suitable hot conditions it can reduce specified oxides of some metals below it; simple carbon reduction is not the usual school route for stable oxides above it. The given ZnO+C equation forms Zn and CO with Zn1 O1 C1 conserved, not a universal carbon-dioxide product or a room-temperature sulfate displacement.
- Zinc 6.5 plus copper sulfate 16.0 equals 22.5 g; zinc sulfate 16.1 plus copper 6.4 also equals 22.5 g. Rounded formula masses 65/64/32/16 make these equal formula-amount proportions consistent. Changed solid masses alone need not match; solvent, excess and liquid changes matter to a whole-apparatus measurement.
- Chemical reactivity is not hardness, density, price or a universal visible rate. Identify the metal and ions, use the relevant series and conditions, predict products where warranted, and check atoms/charge/mass. Surface layers and competing reactions can affect observations. A supplied matrix, animation or balanced equation does not demonstrate handling, heating, gas generation or a performed practical.
Learning evidence
Retain a justified matrix-derived order, qualified predictions, the word/formula/net ionic explanation, two checked half-equations, a distinct carbon-extraction interpretation and a transparent whole-reaction mass comparison. State uncertainty and system boundaries. No mixing, reactive-metal handling, furnace work or real practical competence is claimed.
OER and Wikipedia
Original reaction matrix, series presentation, reacting-mass model, explanations, tasks and worked feedback. Matrix outcomes are supplied evidence for stated comparisons; masses use declared rounded atomic masses rather than a measured practical. The periodic-table reference locates elements but is not presented as the reactivity series. Fresh original FuseSchool metadata, playability/embed and actual preview checked; preview visually inspected, not the whole film or transcript. No protected video questions, textbook figures or practical worksheets copied.
OpenStax Chemistry 2e: Galvanic cells, relevant metal/ion electron-transfer principles consulted without copying apparatus figures or assigning cell construction. OpenStax: Representative metals, relevant oxide-reduction and extraction context consulted; no industrial temperatures, operational procedure or apparatus recipe adopted. DfE Science programme, editorial Year 8 placement within shared KS3. Reviewed 13 November 2026.
Periodic table large.svg, 2012rc, CC BY 3.0. Unchanged original; caption and learning activities are original.
Linked learning areas
aiMOOC Projects
Schulfach+


aiMOOCs


aiMOOC Projekte


MOOCwiki · Deutsch
Nach dem Lernen ist vor dem Lernen
Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.
Zur MOOCwiki-HauptseiteMediathek
Mediathek wird aus dem Wiki geladen ...
Keine passenden Inhalte gefunden. Bitte ändere Suche oder Filter.
NEWSLernweltNOAH fragen