English:Choosing and explaining methods for separating mixtures - Chemistry Year 6
Introduction
Can you recover sand and salt from one mixture without losing track of either? Begin with the desired products, explain the physical property behind each method and follow every collected fraction through the route.
Retrieve what dissolving means, why an ordinary paper filter does not remove dissolved salt and what happens to water during evaporation. This Year 6 editorial bridge consolidates Year 5 materials and Years 5–6 Working scientifically within Science. It is not a separate national Year 6 Chemistry requirement. Supplied numerical records are original hypothetical data; no independent heating, tasting or household-chemical experiment is required.
Choose a method from the property and the desired product
A mixture contains substances together without requiring them to become a single new substance. Physical separation uses differences in properties to recover components. It does not mean extracting the elements that make up a chemical compound: separating sand from salt is different from turning salt itself into other substances. We concentrate on familiar mixtures with known ingredients, not tests on unknown powders or liquids.
Name what you want to collect. Sieving a dry mixture can retain pieces larger than the holes while smaller grains pass through. Both groups may be useful. A sieve works only when the chosen hole size suits the actual pieces; naming the tool without checking sizes does not justify a method. If all grains are smaller than the holes, they pass together.
Filtration with an appropriate ordinary paper filter separates a suitable insoluble solid from a liquid. The residue is the material retained by the filter. The filtrate is the liquid that passes through. Insoluble sand can be retained while a salt solution passes through, so the filtrate may still contain a dissolved substance. Filtrate does not mean pure water. Very fine solid particles, tears, overflow and the chosen filter can also limit a real separation.
Evaporation changes liquid water into water vapour. For an ordinary salt solution under the stated room conditions, water leaves while salt can remain and crystals can form as enough water is removed. Evaporation need not mean boiling. A shallow dish left under teacher-approved room conditions is sufficient for a planning example, though the time needed depends on conditions. Do not expect every solution to be fully dry after one fixed day.
Use this method-selection table as a reasoned starting point, not a universal list of tools:
| Known mixture and goal | Suitable route | Relevant property or change |
|---|---|---|
| Large pebbles and dry fine sand; collect both | Suitable sieve, retain both groups | Stated difference in piece size |
| Sand in water; collect sand and liquid separately | Appropriate paper filtration | Sand is insoluble and retained by this filter |
| Salt solution; collect salt | Room-condition evaporation | Water leaves while salt remains |
| Sand in salt solution; collect sand and salt | Filter, then evaporate the filtrate | Insolubility followed by solvent removal |
| Dry sand and salt; collect sand and salt | Dissolve the salt in sufficient water, filter, then evaporate the filtrate | Different solubility followed by filtration and water removal |
| Salt solution; collect water as liquid | Evaporation alone is insufficient; collection would also need condensation | Water vapour must become a separately collected liquid |
The last case is an extension about the goal, not an instruction to construct a heated apparatus. Capturing and condensing vapour is a different arrangement from leaving an open dish. None of these classroom routes proves that recovered material is safe to eat or drink; appearance alone cannot establish that.
Track sand, salt and water through a multi-step route
Work with the supplied starting mixture: insoluble sand suspended in a salt solution. The salt is already dissolved; adding more water just because another recipe does so is not a required first step. State the goal as recovering sand and salt separately. Choose a suitable paper filter and collection arrangement, and label the collecting vessel before interpreting what is left at each stage.
Follow the route as two branches. Starting mixture → filtration → wet sandy residue retained on the paper, and salt-solution filtrate collected below. Keep both branches. The residue is not automatically pure, dry sand: some solution can remain with it. The filtrate is not salt-free water merely because it looks clear. These qualifications explain why careful handling and further treatment may be needed.
For the sand branch, a teacher-approved rinse with a suitable small amount of clean water could help remove adhering salt solution; collecting that wash with the filtrate can reduce salt left with the sand. More wash water also takes longer to evaporate. This is a compromise, not proof that all contamination vanishes. Drying and checking the solid are separate from catching it on the paper. No learner is instructed to heat a filter or handle hot equipment.
For the salt branch, keep the salt solution in a labelled suitable shallow container and allow water to evaporate under the approved conditions. Salt crystals can be recovered after sufficient water removal. Collecting crystals while liquid remains leaves some dissolved salt in that liquid; do not claim that every grain has been recovered. In an open arrangement the water goes into the surrounding air and is not separately collected.

Now compare a faulty route: evaporate the original sand-and-salt solution first, then try to filter the remaining dry solids. That leaves sand and salt together after water removal. Ordinary filtration requires the relevant liquid mixture and would not simply separate the two dry solids. One possible repair is to dissolve the salt again in sufficient water and filter, but that adds unnecessary work compared with filtering the original wet mixture first.
If the initial mixture is dry sand and salt, dissolving is useful before filtration: add a teacher-approved sufficient quantity of water so the salt can dissolve while sand remains insoluble. If salt remains undissolved, it may be trapped with sand and reduce the separation. Record this possibility instead of promising that stirring any amount of salt into any amount of water will completely dissolve it.
Use the Royal Society of Chemistry film as a separation discussion. Pause to name what each demonstrated method uses and which fraction should be kept for a stated goal. The film is an original publisher embed; any practical shown is not permission to copy a heated or unfamiliar procedure independently. Our online route can be completed with supplied evidence, a labelled diagram and an explanation of both branches.
Audit recovery, diagnose mistakes and judge the evidence
A separation report should distinguish catching a fraction, drying it, identifying what it contains and demonstrating purity. These are related but different achievements. A wet residue can contain water and dissolved salt; clear filtrate can contain dissolved salt and very fine particles. Inspect the actual collection route, not just whether an attractive photograph or a clear liquid appears at the end.
Consider original hypothetical recovery records from a known prepared mixture. The starting dry-solid masses were recorded before water was added. The recovered fractions are reported as dry in this teaching record, excluding the containers and filter paper. This is a comparison of dry-solid inputs and recovered fractions, not a complete mass balance for the water and apparatus.
| Intended component | Starting dry mass | Reported recovered dry fraction | Difference |
|---|---|---|---|
| Sand | 10.0 | 9.2 | 0.8 |
| Salt | 5.0 | 4.6 | 0.4 |
Check the two gaps and the recovered total:
The original dry-solid total is 15.0 g, so the gap between that total and the reported dry fractions is:
Those missing amounts are not proof that matter was destroyed. Some material may remain on apparatus, in a discarded wash or solution, or be spilled. The records alone do not identify the cause. Equally, a dry mass close to the expected value does not prove purity: a fraction could contain another solid. More evidence about composition and handling is needed before making that claim.
Suppose a different sand record is 11.3 g while still wet, compared with 10.0 g starting dry sand. It cannot be treated as a dry-sand recovery greater than the original amount. Water, adhering solution, salt contamination, an included filter or a weighing/recording problem could affect the result. The difference is not automatically a measured water mass because more than one explanation remains possible. Retain the observation and check conditions, rather than invent a favourable correction.
Diagnose errors from consequences. Visible grains in the filtrate suggest checking tears, overflow or whether the filter retains grains of that size; do not assume a particular fault without evidence. Salt missing after the filtrate was poured away calls for changing which fraction is collected. Mixed sand and salt after premature evaporation calls for reconsidering the order. Cloudy or clear appearance alone cannot certify drinking-water safety.
Transfer the reasoning to sugar solution, a dry grain-size mixture or a mixture with an unknown ingredient. A familiar physical principle may suggest a method, but the substance identity, solubility, desired product and safe conditions still matter. Do not extrapolate salt's behaviour into permission to heat any dissolved solid. For unknown classroom samples use the supplied information or ask the teacher rather than taste, smell closely or mix household chemicals.
Finish with a labelled two-branch flowchart, a method-selection table, a complete fraction log and a qualified recovery explanation. Include original and corrected records with reasons, a limitation and a next check. A good online answer demonstrates planning and interpretation; safe apparatus use and actual practical separation require real learner evidence and appropriate observation or verification.
Interactive Tasks
Quiz: Test Your Knowledge
What should guide the choice of a separation route? (The known properties and the components to be collected) (!Only the most attractive apparatus photo) (!The idea that every mixture needs boiling) (!A tool name with no explanation)
Why can a suitable sieve separate large pebbles and fine sand? (Their stated piece sizes differ relative to its holes) (!It turns pebbles into dissolved salt) (!It evaporates all sand) (!It breaks every material into new substances)
What is the residue in the stated sand filtration? (The material retained on the paper) (!The salt solution collected below) (!Only water vapour in the room) (!A guarantee of pure drinking water)
What can the sand-mixture filtrate contain? (Water and dissolved salt) (!Only completely pure water by definition) (!All the original sand and no liquid) (!New salt created by the funnel)
Which route fits sand already suspended in salt solution? (Filter and keep both branches then evaporate the filtrate for salt) (!Evaporate first and claim the dry solids are separated) (!Throw away the filtrate and expect to recover its salt later) (!Filter dry sand and dry salt without a liquid)
Why can filtration fail to separate dry sand and dry salt directly? (The intended selective dissolution and liquid filtration stages are missing) (!An ordinary paper filter always removes dissolved substances) (!Both substances must be destroyed first) (!The salt has already become water vapour)
What happens to water during open room-condition evaporation? (It becomes vapour in the surrounding air rather than a separately collected liquid) (!It is destroyed as matter) (!It stays wholly inside recovered dry salt) (!It automatically enters a labelled drinking bottle)
What is the reported gap between original and recovered dry-solid totals? (1.2 g) (!13.8 g) (!15.0 g) (!26.3 g)
How should the extra wet sand reading of 11.3 g be interpreted? (It needs checking and is not directly a dry-sand recovery value) (!It proves that extra pure dry sand has been created) (!It measures exactly 1.3 g of water with no other possibility) (!It should be silently replaced by 10.0 g)
What does a clear collected liquid establish by itself? (Its appearance alone does not prove purity or drinking safety) (!Every dissolved substance has been removed) (!The original filter had no tears) (!Every component has been recovered dry)
Memory Game
| Mixture | Substances present together without requiring a single new substance |
| Sieving | Separating suitable different-sized pieces with chosen holes |
| Filtration | Separating a suitable insoluble solid from liquid with a filter |
| Residue | Material retained by the filter |
| Filtrate | Liquid that passes through the filter |
| Evaporation | Liquid changing to vapour |
| Condensation | Vapour changing to liquid |
| Solubility | How much substance can dissolve under stated conditions |
Drag and Drop
| Pebbles retained while smaller sand passes | Sieving using a suitable size difference |
| Wet sandy material on the filter | Residue branch to retain and check |
| Salt solution below the paper | Filtrate branch to retain for salt recovery |
| Water leaves a labelled open dish | Evaporation without separate liquid-water collection |
| Vapour becomes separately collected liquid | Condensation also needed for the water-recovery goal |
Crossword Puzzle
| MIXTURE | Substances present together rather than necessarily one new substance |
| SIEVING | Method using suitable differences in piece size |
| FILTRATION | Method retaining a suitable insoluble solid as liquid passes |
| RESIDUE | Material retained by a filter |
| FILTRATE | Liquid that passes through a filter |
| EVAPORATION | Change from liquid water to vapour here |
LearningApps
Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.
Cloze Text
Open Tasks
Easy
- Match properties to methods - Chemistry mixture methods Year 6: Choose a method for pebbles with fine sand, sand in water and salt solution when the solid products are wanted. Explain the relevant property and identify what should be collected in each case.
- Follow both filter branches - Chemistry mixture methods Year 6: For sand already in salt solution, name the residue and filtrate, state what each may contain and explain why both should be retained for the stated goal.
- Explain the open dish - Chemistry mixture methods Year 6: Describe what happens to water and salt in a suitable room-condition evaporation example, why boiling is unnecessary and why the water is not separately collected.
- Check dry recovery records - Chemistry mixture methods Year 6: Calculate the two dry-solid gaps, recovered total and total gap. Give units and explain why a gap is not proof that matter was destroyed.
Standard
- Build a two-branch route - Chemistry mixture methods Year 6: Draw a labelled flowchart for sand in salt solution, including filtration, both collected branches, possible rinse and drying checks, evaporation of the filtrate and water leaving to the air.
- Extend the route to a dry mixture - Chemistry mixture methods Year 6: Explain why dry sand and salt need a selective dissolving stage before filtration. State the sufficient-water assumption and what undissolved salt could do to the residue.
- Repair the wrong order - Chemistry mixture methods Year 6: A plan evaporates the sand-and-salt solution first and then filters the dry remainder. Diagnose the problem, propose a repair and explain a more direct route from the original wet mixture.
- Audit an incomplete report - Chemistry mixture methods Year 6: A learner calls the wet residue pure dry sand and the clear filtrate drinking water. Identify the unsupported claims and list the additional evidence or treatment each would need.
Advanced
- Investigate unexpected mass - Chemistry mixture methods Year 6: Evaluate a wet sandy fraction reported as 11.3 g compared with 10.0 g starting dry sand. Give several possible explanations, retain the record and specify checks without assigning all the difference to water.
- Compare recovery goals - Chemistry mixture methods Year 6: Explain how the plan changes when the desired product is salt, sand or separately collected liquid water. Discuss which fractions are retained and why open evaporation is insufficient for the last goal.
- Diagnose imperfect separation - Chemistry mixture methods Year 6: Visible grains appear in the filtrate and salt recovery is low. Suggest distinct possible causes, explain what evidence would distinguish them and propose one targeted improvement for each.
- Transfer and review evidence - Chemistry mixture methods Year 6: Choose a new supplied mixture, justify a property-based route and identify a limitation. Present a fraction log, checked recovery record and justified correction history; state what actual practical verification is still required.
Learning Check
- Selection check - Chemistry mixture methods Year 6: How should the six cases guide method choice?
- Fraction check - Chemistry mixture methods Year 6: What happens to each component of sand in salt solution?
- Order check - Chemistry mixture methods Year 6: Why is evaporating the original wet mixture first inefficient for separate sand and salt?
- Calculation check - Chemistry mixture methods Year 6: What do the hypothetical dry-solid records show?
- Unusual-record check - Chemistry mixture methods Year 6: What should be done with 11.3 g of wet sandy material?
- Quality and transfer check - Chemistry mixture methods Year 6: How should a trustworthy report qualify its result?
Worked checks and assessment guidance
- Use a suitable sieve for stated different-sized dry pebbles and sand, appropriate filtration for insoluble sand in water and evaporation to collect salt from solution. Sand in salt solution needs filtration then evaporation of the kept filtrate. Dry sand and salt first need sufficient water to dissolve salt selectively. Separately collecting water also needs a suitable vapour-collection and condensation arrangement; no independent heated setup is assigned.
- Sand is retained as a wet residue that may carry solution. The filtrate contains water and dissolved salt. Keep both. A suitable teacher-approved rinse may reduce adhering salt solution but adds water to the collected salt solution; drying and composition checks remain separate. In open evaporation salt can be recovered while water enters the air, not a separate liquid bottle.
- It leaves both solids together. Ordinary liquid filtration cannot directly separate that dry mixture. Dissolving the salt again in sufficient water before filtration could repair the route, but filtering the original sand in salt solution first is more direct. Undissolved salt could be retained with sand if the selective dissolution is incomplete.
- Sand gap 10.0 minus 9.2 equals 0.8 g; salt gap 5.0 minus 4.6 equals 0.4 g; reported recovered total 9.2 plus 4.6 equals 13.8 g. Starting dry solids total 15.0 g, so the total gap is 1.2 g. This excludes water and apparatus. It does not prove destruction or a specific loss mechanism, and a mass near the expected amount would not prove purity.
- Retain and check the record against its wet condition, the container or filter tare, adhering water or salt solution, possible solid contamination and weighing or transcription. It is not directly comparable with dry sand mass. Do not infer exactly 1.3 g water or silently alter it. Any justified correction keeps the original and reason.
- Identify known ingredients, the goal and physical property at each stage; log both branches and retained or discarded fractions. Check filter suitability, tears, overflow, undissolved salt and transfer losses where evidence suggests them. Clear is not necessarily pure or safe to drink; caught is not necessarily dry. Use suitable known supplied cases and teacher-approved conditions, not unknown powders or arbitrary heating. Practical competence needs actual appropriate observation or verification.
Learning evidence
Retain a six-case method table, a two-branch separation flowchart, a complete fraction log, four checked numerical statements and an explanation of wrong-order, incomplete-dissolution and wet-mass cases. Include a changed recovery goal, a realistic limitation, one evidence-led improvement and any original/corrected records with reasons. Label supplied hypothetical data; actual practical separation and handling claims need appropriate real learner evidence and verification.
OER and Wikipedia
DfE England Science programme, Year 5 material separation and Years 5–6 Working scientifically; Year 6 placement here is editorial consolidation within Science.
American Chemical Society: Dissolving and Back Again, teacher background on salt recovery as water evaporates. Its US grade label is not an England year specification. Our separation routes, fraction audit, hypothetical masses and questions are newly authored; practical timing is condition-dependent rather than a guaranteed one-day outcome.
Coffee Filter 2006 09 09.JPG, —Estormiz 06:57, 10 September 2006 (UTC), Public domain dedication. Specific Commons file used unchanged.
Glass evaporating dish.svg, CLauterb, CC0. Specific Commons file used unchanged.
Additional credited schematic reference: FilterDiagram.svg, Wikiwayman at English Wikipedia, CC BY-SA 3.0. It is a simplified size-selection diagram, not an atomic-scale model, actual sand-water measurement or drinking-water certification.
https://www.youtube.com/watch?v=sgRnDK4CFX4 — Royal Society of Chemistry, Separation Techniques - #ChemistryInYourCupboard. Original publisher embed, not downloaded or rehosted. Any demonstrated practical needs the responsible teacher's arrangements; no independent heating, tasting, public upload or purchase is required.
Linked learning areas
aiMOOC Projects
Schulfach+


aiMOOCs


aiMOOC Projekte


MOOCwiki · Deutsch
Nach dem Lernen ist vor dem Lernen
Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.
Zur MOOCwiki-HauptseiteMediathek
Mediathek wird aus dem Wiki geladen ...
Keine passenden Inhalte gefunden. Bitte ändere Suche oder Filter.
NEWSLernweltNOAH fragen