English:Changes of state and the particle model - Chemistry Year 7
Introduction
Ice, liquid water and water vapour have different bulk properties, yet the water molecules retain their identity. You will name five familiar state-change processes and explain their directions using particles and energy transfer. You will also distinguish evaporation from boiling and interpret a simplified melting record without claiming that temperature must rise whenever energy enters.
Retrieve The particle model of solids, liquids and gases - Chemistry Year 7: particles in a solid vibrate, liquid particles remain close but can move past neighbours, and an ordinary gas occupies the available space. This course builds those ideas into a Year 7 sequence within England's key stage 3 content. Use the drawings, supplied records and thought experiments; no heating, dry ice, sealed pressure experiment or handling of unfamiliar substances is required.
Name the change by its starting and finishing states
A change of state changes the physical form of a substance rather than creating a different chemical substance. To name a process reliably, identify the starting state and then follow the arrow to the finishing state. Saying only that something became warmer is not enough: a solid can warm while remaining solid.
| Process | Direction | Example and distinction |
|---|---|---|
| Melting | Solid to liquid | Ice becomes liquid water; the water molecules remain water molecules |
| Freezing | Liquid to solid | Liquid water becomes ice; solid particles still vibrate |
| Evaporation | Liquid to gas at the surface | A puddle can lose water below the boiling point |
| Boiling | Liquid to gas throughout the liquid | Vapour bubbles can grow within the liquid at its boiling point for the given pressure |
| Condensation | Gas to liquid | Water vapour becomes liquid droplets on a sufficiently cool surface |

The diagram includes sublimation, a direct solid-to-gas change, and deposition, a direct gas-to-solid change. These extra routes help you read the complete map, but the five processes in the table are the main targets. A cube, droplet or cloud-like symbol represents a bulk state; it is not the literal shape of one molecule. A cloud drawing must not be taken as proof that gaseous water is visible.
Worked example: an ice–water cycle. Begin with a closed sample containing ice. Energy transferred into the sample can melt the ice into liquid water. The direction is solid to liquid, so label the arrow melting. Remove sufficient energy and the reverse direction, liquid to solid, is freezing. Check the identity: before, during and after these changes, the particles are water molecules. Melting does not split each water molecule into separate hydrogen and oxygen atoms. Reversing the physical process is possible with suitable conditions; it need not happen instantly.
Do not confuse melting with dissolving. A sugar crystal disappearing into water involves mixing sugar with a solvent; the sugar has not simply become a sample of molten sugar. Nor does all apparent disappearance mean evaporation: an unnoticed spill or a leak would be a different explanation. Name a state change only when the evidence supports the starting and finishing states.
For pure water close to normal atmospheric pressure, use approximately 0 °C as the melting/freezing reference and 100 °C as the boiling reference. These are not universal temperatures for all substances or all pressures. Pressure changes affect boiling, and impurities can alter a transition temperature. A process name describes a direction and mechanism, not a magic temperature that applies to everything.
Evaporation, boiling and a misted window
Both evaporation and boiling change liquid to gas, but the processes are not identical. In evaporation, particles escape from the surface. At a temperature below the boiling point, some surface molecules have sufficient energy in appropriate encounters to leave the liquid. Other molecules may return from the vapour. An exposed puddle can therefore become smaller even though it never reaches 100 °C.
In boiling, vapour bubbles grow within the liquid and rise. The boiling point depends on the surrounding pressure. Under ordinary atmospheric conditions, boiling pure water is associated with about 100 °C; at lower pressure it can boil at a lower temperature. Do not turn this into an instruction to change pressure experimentally. Also, not every bubble proves boiling: trapped or dissolved air may leave water before it reaches its boiling point.
Evaporation rate depends on conditions such as temperature, exposed surface, airflow and the surrounding water-vapour content. A hotter sample often evaporates faster when other relevant conditions match, but a comparison changing temperature and exposed area together cannot identify temperature as the sole cause. The words faster and slower need a defined comparison. Evaporation can remove energy from the remaining liquid and its surroundings, helping explain cooling from a wet surface.
Condensation is the reverse state direction: gas to liquid. Imagine an intact, dry cold cup placed in humid room air. Water droplets appear on the outside. Identify the location first: the exterior. Then identify a source of water: water vapour already in the surrounding air. Near a sufficiently cool surface, water molecules transfer energy to the cooler surroundings and can stay close together as liquid. The droplets do not require water to pass through an intact cup wall.

Worked window explanation. Observation: droplets form on the room-facing side of a cold window. Model explanation: water vapour from indoor air loses energy near the cold glass and forms liquid. Check a competing claim: saying the glass manufactured new water molecules is unnecessary and inconsistent with this physical-change model. State a limit: one photograph cannot by itself measure humidity, show every molecule's origin or rule out a leak in an unfamiliar real building. The supplied case specifies an intact surface and suitable conditions.
The white cloud above hot water is mainly tiny liquid droplets formed when vapour condenses in cooler air. Gaseous water itself is invisible. The everyday word steam is often used for the visible cloud, so specify the state when you explain it scientifically. There is no need to approach a kettle or hot vapour to learn this distinction.
Video focus: trace the state directions and compare evaporation with boiling. After viewing, explain a drying puddle and a misted window without using their names alone as explanations. Treat drawings as simplified representations; use the table and text if playback is unavailable.
Energy, temperature and what stays the same
Energy transfer and temperature change are related but are not the same statement. Within a single phase, warming normally means greater average particle kinetic energy: solid particles vibrate more vigorously, for example. During melting of a pure crystalline substance at a fixed pressure, energy can change the particle arrangement while the temperature remains approximately constant until the solid has melted. It is incorrect to insist that every added amount of energy must make the thermometer reading rise during the transition.
In ice, molecules are held in an organised structure and vibrate. During melting the structure becomes less ordered and molecules can move past neighbours as a liquid. The attractions between water molecules are partly overcome; the bonds within each water molecule are not broken by ordinary melting. During freezing, energy is transferred to the surroundings as a solid arrangement forms. Freezing does not mean that cold is a material poured into the liquid, or that its particles become motionless.
| Time in an invented teaching record / min | Temperature / °C | Description of this pure-water sample at fixed normal atmospheric pressure |
|---|---|---|
| 0 | −10 | Solid ice warming |
| 1 | 0 | Ice has reached its melting reference |
| 2 | 0 | Ice and liquid present; further melting |
| 3 | 0 | Ice and liquid present; further melting |
| 4 | 0 | Last ice has just melted |
| 5 | 20 | Liquid water warming |
| 6 | 40 | Liquid water warming |
This is an invented, simplified record, not a measured experiment or a universal melting timetable. Read the flat section: from 1 to 4 minutes the listed temperature stays at 0 °C while the state description changes. Its duration is three minutes. Energy continues to enter during melting; temperature is not a complete measure of the sample's internal energy. A graph would have time on the horizontal axis and temperature on the vertical axis. A flat line here does not mean no change occurred. Impure samples, changing pressures, uneven temperatures or real measurement limitations can give different-looking records.
Mass and volume must also be distinguished. In a closed system undergoing only a physical state change, matter does not enter or leave, and the total mass is conserved. Consider an invented accounting example: an 80 g container holds 20 g of water as ice and liquid. The total is 100 g both before and after all that ice melts, provided the same matter is retained. This comparison requires no heating of a sealed vessel.
The volume need not stay the same: ordinary ice has a more open structure than liquid water and expands on freezing. If an open dish loses mass as water evaporates, count the escaped water vapour as well before making a claim about conservation. Water has not been destroyed; some has crossed your chosen system boundary. Do not infer the mass of the gas from the dish reading alone without stating which objects and substances were weighed.
Finish with a model audit. Follow the same water molecules through your drawings, preserve their representative count in a closed-sample sequence, and change their arrangement and movement appropriately. Do not make the molecules larger to explain expansion, and do not assume all solids are denser than their liquids. The molecule identity, sample mass, sample volume, temperature and transferred energy are different quantities: identify exactly which one your evidence concerns.
Interactive Tasks
Quiz: Test Your Knowledge
Which direction defines melting? (Solid to liquid) (!Liquid to gas) (!Gas to solid) (!Liquid to solid)
What is retained when ice melts into liquid water? (The chemical identity of the water molecules) (!An unchanging bulk shape) (!The same arrangement of molecules in every detail) (!The absence of all particle movement)
Which process can shrink an exposed puddle below its boiling point? (Evaporation from the surface) (!Freezing throughout the liquid) (!Breaking every water molecule into atoms) (!Deposition of liquid into gas)
What distinguishes boiling from evaporation in this lesson? (Vapour bubbles can grow throughout the boiling liquid) (!Boiling always creates a new chemical substance) (!Evaporation occurs only at exactly one hundred degrees Celsius) (!Boiling removes all particle motion)
What is the white cloud above hot water mainly made of? (Tiny liquid water droplets) (!Individually visible water molecules) (!Solid hydrogen atoms) (!Invisible gaseous water made visible without condensation)
In the supplied intact cold-cup case, where can outside droplets come from? (Water vapour in the surrounding air) (!Water necessarily passing through the cup wall) (!The glass manufacturing new water molecules) (!Cold material changing into water atoms)
Energy enters during the flat melting section of the invented record. What is happening? (The state changes while the listed temperature stays constant) (!No change of any kind is possible) (!Every water molecule must split apart) (!The ice has stopped receiving energy)
How long is the flat section from one to four minutes in the teaching record? (Three minutes) (!Four minutes) (!One minute) (!Six minutes)
The same matter remains in the eighty gram container with twenty grams of water after melting. What is its total mass? (One hundred grams) (!Eighty grams) (!Twenty grams) (!Sixty grams)
Why is a boiling temperature meaningful only with stated conditions? (Pressure and the substance affect the transition) (!Every liquid boils at the same temperature) (!The container colour alone defines the boiling point) (!Boiling temperature is unrelated to the material)
Memory Game
| Melting | Solid becomes liquid |
| Freezing | Liquid becomes solid |
| Evaporation | Molecules escape from a liquid surface into gas |
| Boiling | Vapour bubbles grow throughout a liquid at its boiling point |
| Condensation | Gas becomes liquid |
| Sublimation | Solid changes directly to gas |
| Deposition | Gas changes directly to solid |
| Closed system | No matter enters or leaves the chosen boundary |
Drag and Drop
| Ice turning to liquid water | Melting: solid to liquid |
| Liquid water becoming ice | Freezing: liquid to solid |
| A puddle drying without boiling | Evaporation: surface liquid to gas |
| Vapour bubbles growing within boiling water | Boiling: liquid to gas throughout the sample |
| Vapour forming droplets on an intact cold window | Condensation: gas to liquid |
Crossword Puzzle
| MELTING | Solid-to-liquid process |
| FREEZING | Liquid-to-solid process |
| BOILING | Liquid-to-gas process with growing vapour bubbles throughout |
| EVAPORATION | Liquid-to-gas process at a surface |
| CONDENSATION | Gas-to-liquid process |
| ENERGY | What can be transferred into melting ice without raising its temperature during the transition |
LearningApps
Optional extra practice. Choose an appropriate activity with your teacher. If the external collection is unavailable, use the native activities and independent tasks in this course.
Cloze Text
Open Tasks
Easy
- Five state-change arrows: Draw three state boxes and label the five core processes in the correct directions. Put evaporation and boiling on the liquid-to-gas route but add a distinguishing note for each.
- Molecule identity storyboard: Make three original drawings of the same closed sample as ice, liquid and gas. Keep the same number and size of representative water symbols. Explain why no hydrogen or oxygen atoms are released by this physical cycle.
- Visible or invisible water: Make a two-column explanation of invisible gaseous water and visible liquid droplets. Use a window photograph or the supplied image; do not approach hot water for a photograph.
- Name and explain a daily change: Choose a drying puddle, melting ice or misted window. Give its starting state, finishing state and a particle explanation. Separate the visible observation from the invisible model.
Standard
- Plot the invented melting record: Plot all seven supplied points with labelled axes and units. Mark the interval from one to four minutes, calculate its duration and explain why a flat temperature line does not imply no energy transfer.
- Cold cup explanation audit: Compare two claims: water came through an intact cup wall, or water vapour from humid air condensed outside. Explain why the supplied case supports the second account and state one measurement the photograph alone cannot provide.
- Evaporation and boiling comparison: Create a comparison table covering location in the liquid, bubbles, temperature conditions and the unchanged chemical identity. Include a drying-room example that does not involve boiling.
- Choose the system boundary: Draw an open evaporating dish, surrounding air and a larger boundary containing both. Explain how a dish reading can fall while water matter is conserved across the larger account.
Advanced
- Repair a melting misconception: Rewrite this explanation: heating ice always raises temperature and breaks water molecules apart. Use the invented record to distinguish warming, transition energy and bonds within molecules. Include an explicit limit of the idealised data.
- Design a fair evaporation comparison: Plan a paper-only comparison testing exposed surface area. Specify the measured outcome, how temperature, airflow and starting water are controlled, and why changing several factors prevents a single-cause conclusion. A practical requires separate teacher approval.
- Closed mass and changing volume: Use the eighty gram container and twenty gram water example to explain constant total mass but potentially changing sample volume. Link the ice structure to expansion without enlarging individual molecules.
- State-change explanation portfolio: Create a short original guide linking a state map, a particle sequence and the plotted teaching record. Credit any reused original media, answer a new transfer case after a delay and describe what you corrected. No pupil face recording or public upload is required.
Learning Check
- Cycle and identity: Explain how ice can become liquid and then ice again without changing the chemical identity of its particles.
- Puddle and bubbles: A puddle shrinks at a temperature below its boiling point. Another sample has growing vapour bubbles throughout at its boiling point. Compare the processes.
- Window evidence: Explain droplets on the outside of the supplied intact cold cup, and distinguish observation from inference.
- Flat temperature interval: Interpret the invented record from one to four minutes. Give the duration and explain energy and state.
- Mass accounting: The eighty gram container retains its twenty grams of water through melting. A different open dish loses water to air. Compare what their balance readings can establish.
- Two claims beyond the evidence: Evaluate: every liquid boils at 100 °C, and freezing makes all particles stop.
Worked checks and assessment guidance
- Melting is solid to liquid; freezing reverses the state direction. Energy transfer changes arrangement and movement, with molecules able to move past neighbours in liquid and vibrating in solid positions. The water molecules remain water molecules; ordinary melting does not split their internal bonds.
- The puddle can evaporate from the surface below boiling. The second case describes boiling throughout the liquid at the stated pressure. Both transfer liquid water into gaseous water without changing molecule identity. An isolated bubble without the supplied conditions would not by itself establish boiling.
- Visible liquid droplets are an observation. The model explanation is that water vapour in humid surrounding air transfers energy near the sufficiently cold surface and condenses. The intact-wall case needs no water leakage or creation of molecules. A photograph alone does not measure humidity or prove every proposed building defect absent.
- Four minus one gives three minutes at a listed 0 °C. The sample changes from ice reaching melting conditions to all liquid, while energy continues to enter for the transition. Approximately constant temperature during this idealised pure-substance change does not mean no energy transfer or no particle rearrangement.
- The retained container example totals 100 g before and after, using the same matter. The open dish alone may lose mass as water vapour leaves its weighing boundary; include that escaped matter in a larger account. Neither outcome means water molecules are destroyed, and mass conservation does not require constant volume.
- The 100 °C reference concerns pure water near normal atmospheric pressure, not every substance and pressure. Solid particles retain vibration; freezing changes arrangement and transfers energy to the surroundings. Both claims remove conditions or confuse bulk state with absence of microscopic motion.
Learning evidence
Retain a correctly directed state map, an evaporation–boiling comparison, a particle sequence preserving representative identity and count, and a labelled graph of the invented melting record. Add a condensation explanation distinguishing liquid droplets from invisible vapour, and a mass account with an explicit system boundary. Your worked responses should explain why temperature, energy, mass and volume cannot be treated as the same quantity. Revisit one unfamiliar transfer case after a delay and document a correction. Quiz scores provide practice evidence, not a certificate of practical skill or proof that a single reading establishes a material's identity.
OER and Wikipedia
Department for Education: science programmes of study — key stage 3 changes of state, qualitative energetics and physical-change particle models. The Year 7 sequence here is an editorial placement within that key stage.
ACS: Changing State—Evaporation and ACS: Changing State—Condensation — references for surface escape, unchanged water molecules and the origin of liquid droplets. Their practical procedures are not assigned here.
ACS: Changing State—Freezing and ACS: Changing State—Melting — reference for molecular arrangement and the ice–water exception. Separate teacher-only summary videos and dry-ice or heating activities are not embedded or assigned.
OpenStax Chemistry 2e: Phase Transitions — background for energy transfer, phase changes at stated pressure and idealised melting plateaus. The supplied time record and mass example are original hypothetical teaching data, not copied measurements. Advanced enthalpy and vapour-pressure calculations are outside this lesson.
State of matter — optional wider overview; advanced additional states are not assessed here.
States of Matter.svg — SiliconProphet. CC BY-SA 4.0. Specific original file embedded without changes.
Condensation droplets on glass surface.jpg — Dreamora96x. CC BY 4.0. Specific original file embedded without changes.
The state-map history additionally records arrow corrections by GR8DAN and language revisions including Immanuelle; the original credit identifies SiliconProphet. The diagram includes sublimation and deposition as additional routes.
Changes of State | Matter | Physics | FuseSchool — FuseSchool - Global Education. Original English publisher embed, not downloaded or rehosted. Explanations and state table remain available without video playback.
Linked learning areas
aiMOOC Projects
Schulfach+


aiMOOCs


aiMOOC Projekte


MOOCwiki · Deutsch
Nach dem Lernen ist vor dem Lernen
Entdecke direkt den nächsten Lernkurs. Weitere Inhalte erscheinen, wenn Du weiter nach unten scrollst.
Zur MOOCwiki-HauptseiteMediathek
Mediathek wird aus dem Wiki geladen ...
Keine passenden Inhalte gefunden. Bitte ändere Suche oder Filter.
NEWSLernweltNOAH fragen