Diese Datei stammt aus Wikimedia Commons und kann von anderen Projekten verwendet werden. Die Beschreibung von deren Dateibeschreibungsseite wird unten angezeigt.
Winchester Museum Service, Robert Webley, 2006-12-05 16:43:25
Titel
Roman L-shaped lift key (drawing)
Beschreibung
English: A corroded cast iron L-shaped lift key from a Roman tumbler lock. The key is of the form numbered '3' in Manning's (1985, 91; fig. 25) typology: it has a stem that narrows towards the bit, a rolled bow, and ?three teeth on the bit. The rolled suspension 'loop' no longer joins the stem. It is 15.9mm wide and up to 14.8mm across externally. The upper part of the stem is rectangular in section (c. 13.5mm by c. 9.5mm). About 57mm below the top of the bow it narrows to a ?circular section with diameter c. 9mm. The bit is just past the perpendicular and is bent round on itself at its terminal suggesting that it may have been damaged. Two teeth survive (Ls.: c. 11mm, c. 13.8mm) and the extension beyond the second tooth suggests at least a third, making it rare (Manning 1985, 90). This key is similar to an example illustrated in Manning (1985, Plate 40; ref. 034). A wide Roman date has been given since such keys have emerged from different archaeological contexts and because the form is an enduring one (see below, 'Notes').
Abgebildeter Ort
(County of findspot) Hampshire
Datum
zwischen 50 und 400
Inventarnummer
FindID: 150399 Old ref: HAMP-B380C2 Filename: HAMP-B380C2Romanliftkeydrawing.jpg
Anerkennung
The Portable Antiquities Scheme (PAS) is a voluntary programme run by the United Kingdom government to record the increasing numbers of small finds of archaeological interest found by members of the public. The scheme started in 1997 and now covers most of England and Wales. Finds are published at https://finds.org.uk
The Portable Antiquities Scheme/ The Trustees of the British Museum
Dieses Werk darf von dir
verbreitet werden – vervielfältigt, verbreitet und öffentlich zugänglich gemacht werden
neu zusammengestellt werden – abgewandelt und bearbeitet werden
Zu den folgenden Bedingungen:
Namensnennung – Du musst angemessene Urheber- und Rechteangaben machen, einen Link zur Lizenz beifügen und angeben, ob Änderungen vorgenommen wurden. Diese Angaben dürfen in jeder angemessenen Art und Weise gemacht werden, allerdings nicht so, dass der Eindruck entsteht, der Lizenzgeber unterstütze gerade dich oder deine Nutzung besonders.
Diese Datei enthält weitere Informationen, die in der Regel von der Digitalkamera oder dem verwendeten Scanner stammen. Durch nachträgliche Bearbeitung der Originaldatei können einige Details verändert worden sein.