Glanz: aiMOOC über GPT aiMOOC Action erstellt

2026-08-31T20:50:00Z

aiMOOC über GPT aiMOOC Action erstellt

Neue Seite

{{T}}
[[Category:English]]
[[Category:Fluid Mechanics]]

{{BR}}
= Introduction =

'''Fluid Mechanics''' is the study of liquids and gases at rest and in motion. It connects [[English:Continuum mechanics|continuum mechanics]], [[English:Thermodynamics|thermodynamics]], [[English:Calculus|calculus]], [[English:Differential equations|differential equations]], and engineering design. In this university-level aiMOOC, you will learn to translate a physical flow into a mathematical model, choose an appropriate control volume, apply conservation laws, estimate the importance of competing effects, and judge whether a result is physically plausible.

A fluid continuously deforms under any sustained shear stress. This definition covers liquids and gases, but their behavior can differ strongly because density changes are often negligible for liquid flows and important for high-speed gas flows. Most introductory analysis therefore begins with the '''continuum hypothesis''': molecular detail is replaced by smooth fields such as pressure <math>p(\mathbf{x},t)</math>, density <math>\rho(\mathbf{x},t)</math>, temperature <math>T(\mathbf{x},t)</math>, and velocity <math>\mathbf{u}(\mathbf{x},t)</math>.

[[File:Reynolds observations turbulence 1883.svg|500px|frameless|center]]

The classic Reynolds dye experiment makes an essential idea visible: orderly laminar motion can give way to strongly mixed turbulent motion when inertial effects become sufficiently important relative to viscous effects.

{{#ev:youtube|https://www.youtube.com/watch?v=pYUwXUFwBng|500|center}}

This introductory university lecture provides a broad entry point into advanced fluid mechanics and the governing equations.

{{BR}}
== Learning Objectives ==

By the end of this aiMOOC, you should be able to:
# [[English:Fluid properties|Fluid properties]]: Explain density, pressure, viscosity, compressibility, and surface tension and use them consistently with SI units.
# [[English:Fluid statics|Fluid statics]]: Determine pressure variation, hydrostatic forces, buoyancy, and stability for fluids at rest.
# [[English:Fluid kinematics|Fluid kinematics]]: Distinguish Eulerian and Lagrangian descriptions and interpret streamlines, pathlines, streaklines, divergence, and vorticity.
# [[English:Conservation law|Conservation law]]: Apply mass, momentum, and energy balances to control volumes and differential flow fields.
# [[English:Dimensional analysis|Dimensional analysis]]: Use nondimensional groups such as Reynolds, Froude, Mach, and Weber numbers to identify dominant physics and design scaled experiments.
# [[English:Internal flow|Internal flow]]: Analyze laminar and turbulent pipe flow, pressure loss, friction factors, and minor losses.
# [[English:Boundary layer|Boundary layer]]: Explain wall shear, boundary-layer growth, separation, drag, lift, and vortex shedding.
# [[English:Computational fluid dynamics|Computational fluid dynamics]]: Describe how governing equations become numerical models and evaluate verification, validation, and modeling assumptions.

{{BR}}
= Physical Foundations =

{{BR}}
== Continuum Model and Fluid Properties ==

At engineering scales, a fluid is usually modeled as a continuum. Density is <math>\rho=m/V</math>. The '''dynamic viscosity''' <math>\mu</math> measures resistance to shear deformation, while the '''kinematic viscosity''' is <math>\nu=\mu/\rho</math>. For a Newtonian fluid in simple shear,

<math>\tau=\mu\frac{du}{dy}</math>,

where <math>\tau</math> is shear stress and <math>du/dy</math> is the velocity gradient. Water and air are often well approximated as Newtonian over ordinary engineering conditions, while paints, polymer melts, blood, and suspensions can show non-Newtonian behavior.

Pressure in a fluid at rest acts normally to a surface. Surface tension becomes especially important when characteristic lengths are small, as in droplets, bubbles, capillary flows, and microfluidics. Compressibility measures how density changes with pressure; it is central to acoustics and gas dynamics.

[[File:Poiseuille flow.svg|500px|frameless|center]]

The parabolic Poiseuille profile illustrates how viscosity and the no-slip condition create a strong velocity gradient across a fully developed laminar flow.

{{BR}}
== Fluid Statics ==

For a fluid at rest under gravity with vertical coordinate <math>z</math> positive upward,

<math>\frac{dp}{dz}=-\rho g</math>.

If density is approximately constant, integration gives <math>p_2-p_1=-\rho g(z_2-z_1)</math>. This relation underlies manometers, pressure measurements in reservoirs, forces on gates, and many hydraulic systems. Gauge pressure is measured relative to ambient atmospheric pressure; absolute pressure is measured relative to vacuum.

[[File:Hydrostatic-pressure.svg|500px|frameless|center]]

The resultant hydrostatic force on a submerged plane surface equals the pressure integral over that area. The center of pressure generally lies below the centroid for a vertical surface because pressure increases with depth. [[English:Archimedes' principle|Archimedes' principle]] states that the buoyant force equals the weight of displaced fluid:

<math>F_B=\rho g V_{\mathrm{displaced}}</math>.

Stability of floating bodies depends on the relative locations of the center of gravity, center of buoyancy, and metacenter.

{{BR}}
= Fluid Kinematics =

{{BR}}
== Eulerian and Lagrangian Descriptions ==

A '''Lagrangian''' description follows individual fluid particles. An '''Eulerian''' description observes field variables at fixed positions in space. Engineering fluid mechanics mainly uses the Eulerian viewpoint because velocity, pressure, and temperature fields can be measured or computed throughout a domain.

The material derivative connects the two viewpoints:

<math>\frac{D\phi}{Dt}=\frac{\partial \phi}{\partial t}+\mathbf{u}\cdot\nabla\phi</math>.

For velocity, this gives the particle acceleration

<math>\frac{D\mathbf{u}}{Dt}=\frac{\partial\mathbf{u}}{\partial t}+(\mathbf{u}\cdot\nabla)\mathbf{u}</math>.

The first term is local acceleration and the second is convective acceleration.

A '''streamline''' is everywhere tangent to the instantaneous velocity field. A '''pathline''' is the trajectory of one marked particle. A '''streakline''' is the locus of all particles that previously passed through a fixed point. These coincide in steady flow but need not coincide in unsteady flow.

The divergence <math>\nabla\cdot\mathbf{u}</math> measures local volumetric expansion, while vorticity <math>\boldsymbol{\omega}=\nabla\times\mathbf{u}</math> measures local rotation of the velocity field.

{{BR}}
= Conservation Laws =

{{BR}}
== Conservation of Mass ==

For a control volume, conservation of mass is

<math>\frac{d}{dt}\int_{CV}\rho\,dV+\int_{CS}\rho\mathbf{u}\cdot\mathbf{n}\,dA=0</math>.

The differential continuity equation is

<math>\frac{\partial\rho}{\partial t}+\nabla\cdot(\rho\mathbf{u})=0</math>.

For constant-density incompressible flow this reduces to <math>\nabla\cdot\mathbf{u}=0</math>. In steady one-dimensional flow through a duct, <math>\dot m=\rho A V</math> is constant. For a constant-density fluid, this becomes <math>A_1V_1=A_2V_2</math>.

{{#ev:youtube|https://www.youtube.com/watch?v=UZW1tdTjBpI|500|center}}

The Reynolds transport theorem provides the formal bridge between conservation laws written for a moving system and balances written for a fixed or moving control volume.

{{BR}}
== Linear Momentum and the Navier–Stokes Equations ==

The control-volume momentum balance states that the sum of external forces equals the rate of accumulation of momentum plus the net momentum flux through the control surface. It is especially useful for jets, nozzles, pipe bends, propulsion devices, and hydraulic machinery.

For an incompressible Newtonian fluid with constant viscosity, the differential momentum equation is

<math>\rho\left(\frac{\partial\mathbf{u}}{\partial t}+\mathbf{u}\cdot\nabla\mathbf{u}\right)=-\nabla p+\mu\nabla^2\mathbf{u}+\rho\mathbf{g}</math>.

These [[English:Navier–Stokes equations|Navier–Stokes equations]] express a balance among inertia, pressure forces, viscous diffusion of momentum, and body forces. Their apparent compactness hides difficult nonlinear coupling through the convective term.

{{#ev:youtube|https://www.youtube.com/watch?v=aLKTax8C4-4|500|center}}

This lecture introduces the Navier–Stokes equations and emphasizes how viscosity enters the momentum balance.

{{BR}}
== Mechanical Energy and Bernoulli's Equation ==

Along a streamline in steady, incompressible, inviscid flow with no shaft work or dissipative loss, Bernoulli's equation can be written as

<math>\frac{p}{\rho g}+\frac{V^2}{2g}+z=\mathrm{constant}</math>.

The three terms are pressure head, velocity head, and elevation head. The relation is a mechanical-energy statement, not a universal rule that higher speed always implies lower pressure. Before applying Bernoulli's equation, check the assumptions and choose the two points carefully.

[[File:Venturi5.svg|500px|frameless|center]]

A Venturi demonstrates the coupled roles of continuity and mechanical energy. In an incompressible flow, a smaller cross-sectional area requires a higher mean speed. Under suitable low-loss conditions, that acceleration is accompanied by a reduction in static pressure.

{{#ev:youtube|https://www.youtube.com/watch?v=i7QrAK9bUrc|500|center}}

This lecture develops Bernoulli's equation in the context of fluid mechanics and helps connect the equation to engineering flow systems.

For real piping systems, pumps, turbines, and dissipation are incorporated through the extended mechanical-energy equation. A useful head form is

<math>\frac{p_1}{\rho g}+\alpha_1\frac{V_1^2}{2g}+z_1+h_p=\frac{p_2}{\rho g}+\alpha_2\frac{V_2^2}{2g}+z_2+h_t+h_L</math>,

where <math>h_p</math> is pump head added, <math>h_t</math> is turbine head removed, <math>h_L</math> is head loss, and <math>\alpha</math> corrects for nonuniform velocity profiles.

{{BR}}
= Dimensional Analysis and Similarity =

Dimensional analysis reduces a large variable set to a smaller set of nondimensional groups. The [[English:Buckingham Pi theorem|Buckingham Pi theorem]] is particularly valuable when the governing equation is unknown or when a scale model is used.

{| class="wikitable"
! Dimensionless group
! Definition
! Main physical comparison
! Typical use
|-
| Reynolds number
| <math>Re=\frac{\rho V L}{\mu}=\frac{VL}{\nu}</math>
| Inertia to viscosity
| Laminar-turbulent behavior, boundary layers, pipe flow
|-
| Froude number
| <math>Fr=\frac{V}{\sqrt{gL}}</math>
| Inertia to gravity
| Free-surface waves and open-channel flow
|-
| Mach number
| <math>Ma=\frac{V}{a}</math>
| Flow speed to sound speed
| Compressibility and gas dynamics
|-
| Weber number
| <math>We=\frac{\rho V^2L}{\sigma}</math>
| Inertia to surface tension
| Jets, droplets, sprays, bubbles
|-
| Euler number
| <math>Eu=\frac{\Delta p}{\rho V^2}</math>
| Pressure to inertia
| Pressure-drop and turbomachinery scaling
|}

Dynamic similarity between a model and a prototype requires matching the nondimensional groups that govern the phenomenon. You cannot always match every group simultaneously, so engineering judgment is needed to preserve the dominant physics.

{{BR}}
= Internal Viscous Flow =

{{BR}}
== Laminar Pipe Flow ==

For steady, fully developed, incompressible, Newtonian flow through a straight circular pipe, the velocity profile is parabolic. The mean velocity <math>V</math> and pressure drop satisfy the Hagen–Poiseuille relation

<math>\Delta p=\frac{32\mu V L}{D^2}</math>.

The Darcy friction factor is <math>f=64/Re</math> for fully developed laminar flow in a circular pipe.

[[File:Velocity profile Hagen-Poiseuille flow.png|500px|frameless|center]]

The no-slip condition forces zero fluid velocity at a stationary wall, while the centerline velocity is largest. The wall shear stress is directly connected to the streamwise pressure gradient.

{{BR}}
== Turbulent Pipe Flow and Head Loss ==

For both laminar and turbulent flow, the Darcy–Weisbach equation expresses major head loss as

<math>h_f=f\frac{L}{D}\frac{V^2}{2g}</math>.

In turbulent pipe flow, the friction factor depends on Reynolds number and relative roughness <math>\varepsilon/D</math>. The Colebrook equation is an implicit correlation for the Darcy friction factor in the turbulent regime:

<math>\frac{1}{\sqrt{f}}=-2\log_{10}\left(\frac{\varepsilon/D}{3.7}+\frac{2.51}{Re\sqrt{f}}\right)</math>.

[[File:Moody EN.svg|500px|frameless|center]]

The Moody chart combines laminar and turbulent pipe-flow behavior and allows you to estimate the Darcy friction factor from Reynolds number and relative roughness.

Minor losses from fittings, valves, entrances, exits, contractions, and expansions are commonly modeled as <math>h_m=K V^2/(2g)</math>. The word "minor" is historical: in a compact system with many fittings, these losses can be comparable to or larger than straight-pipe losses.

{{BR}}
= Boundary Layers, Drag, and Flow Separation =

Viscous effects are often concentrated near solid surfaces. Because of the no-slip condition, velocity rises from zero at a stationary wall toward the external flow value across a thin '''boundary layer'''. Boundary-layer thickness usually increases downstream.

[[File:Boundary layer separation.svg|500px|frameless|center]]

A sufficiently strong adverse pressure gradient can slow the near-wall fluid until the wall shear stress approaches zero and the flow separates. Separation can create a large wake, increase pressure drag, cause aerodynamic stall, or produce unsteady loads.

{{#ev:youtube|https://www.youtube.com/watch?v=xT5Ow63BK7I|500|center}}

This boundary-layer lecture develops the idea that thin near-wall regions can control the behavior of an entire external flow.

[[File:Streamlines around a NACA 0012.svg|500px|frameless|center]]

For flow around an airfoil, pressure and shear stresses integrated over the surface produce aerodynamic forces. Lift is the force component perpendicular to the reference flow and drag is the component parallel to it. Potential-flow streamlines can clarify outer-flow geometry, but real drag and separation require viscous effects.

[[File:Karman-Vortex.gif|500px|frameless|center]]

Alternating vortex shedding behind a bluff body can form a von Kármán vortex street. The shedding frequency is often described by the Strouhal number <math>St=fL/V</math>. This phenomenon matters for chimneys, cables, bridge members, heat exchangers, and many other structures exposed to cross-flow.

{{BR}}
= Free-Surface and Open-Channel Flow =

Flows with a free surface are strongly influenced by gravity. The Froude number distinguishes subcritical behavior, where gravity waves can propagate upstream, from supercritical behavior, where the flow outruns upstream wave propagation. Critical flow marks the transition.

A hydraulic jump is a rapid transition from shallow, fast supercritical flow to deeper, slower subcritical flow. Momentum is approximately conserved across an idealized short jump, while mechanical energy is strongly dissipated by turbulence.

[[File:Hydraulic jump in sink.jpg|500px|frameless|center]]

Hydraulic jumps are used deliberately in stilling basins downstream of spillways and gates to dissipate energy and protect channels from erosion.

{{BR}}
= Compressibility and High-Speed Flow =

In compressible flow, density variation cannot be neglected. The Mach number <math>Ma=V/a</math>, where <math>a</math> is the local speed of sound, is a primary indicator of compressibility effects. At low Mach number, density changes caused by motion are often small; as Mach number increases, pressure, density, and temperature become increasingly coupled.

Sonic conditions, choking, shock waves, and expansion waves appear in gas dynamics and require thermodynamic relations in addition to mass, momentum, and energy conservation. In many introductory liquid-flow problems, compressibility is neglected, but cavitation can still occur if local absolute pressure falls to the liquid's vapor pressure.

{{BR}}
= Measurement, Experiments, and Uncertainty =

Fluid mechanics is an experimental science as well as a mathematical one. Useful measurements include static and total pressure, flow rate, velocity, wall shear, forces, free-surface elevation, and temperature. Instruments include manometers, Pitot-static probes, Venturi meters, orifice meters, hot-wire anemometers, laser Doppler velocimetry, and particle image velocimetry.

Every measurement has uncertainty. When comparing experiment and theory, report instrument resolution, calibration assumptions, repeated-measurement variability, and uncertainty propagation where appropriate. Dimensional consistency and limiting cases are valuable first checks on any derived expression.

{{BR}}
= Computational Fluid Dynamics =

[[English:Computational fluid dynamics|Computational fluid dynamics]] replaces continuous governing equations with discrete algebraic equations on a computational mesh. A credible CFD study requires more than a visually attractive contour plot. You should specify governing equations, constitutive models, boundary and initial conditions, discretization schemes, convergence criteria, mesh sensitivity, and the quantities used for comparison.

'''Verification''' asks whether the equations were solved numerically with adequate accuracy. '''Validation''' asks whether the chosen mathematical model represents the real physical system adequately for the intended purpose. Turbulent flows often require additional closure models, such as Reynolds-averaged models or large-eddy simulation, because resolving every turbulent scale can be prohibitively expensive.

{{BR}}
= A Problem-Solving Workflow =

A disciplined fluid-mechanics solution can follow this sequence:
# [[English:Physical model|Physical model]]: Define the system, geometry, fluid, time dependence, and quantities you need.
# [[English:Assumption|Assumption]]: Decide whether the flow can be treated as incompressible, inviscid, steady, one-dimensional, fully developed, or otherwise simplified.
# [[English:Control volume|Control volume]]: Choose a boundary that makes mass, momentum, or energy fluxes easy to describe.
# [[English:Governing equation|Governing equation]]: Apply conservation of mass first, then momentum or energy as required.
# [[English:Scaling|Scaling]]: Evaluate dimensionless groups to test the assumed dominant effects.
# [[English:Boundary condition|Boundary condition]]: State wall, inlet, outlet, symmetry, free-surface, or far-field conditions explicitly.
# [[English:Solution check|Solution check]]: Verify units, signs, limiting behavior, conservation, and order of magnitude.
# [[English:Engineering interpretation|Engineering interpretation]]: Explain what the result means physically and how uncertainty or neglected effects could change the conclusion.

{{BR}}
= Interactive Tasks =

{{BR}}
== Quiz: Test Your Knowledge ==

{{MC}}

'''Which assumption allows molecular detail to be replaced by smooth fluid fields?'''
(Continuum hypothesis)
(!Hydraulic jump condition)
(!Nozzle choking rule)
(!Vortex shedding criterion)

{{E}}
<br>

{{MC}}

'''For a static fluid of constant density, what happens to pressure as depth below a free surface increases?'''
(It increases linearly)
(!It remains constant)
(!It decreases linearly)
(!It becomes independent of gravity)

{{E}}
<br>

{{MC}}

'''What does the incompressible continuity equation require?'''
(Zero velocity divergence)
(!Zero fluid velocity)
(!Zero pressure gradient)
(!Zero vorticity everywhere)

{{E}}
<br>

{{MC}}

'''When is the simple streamline form of Bernoulli's equation most appropriate?'''
(For steady incompressible inviscid flow without shaft work)
(!For every turbulent pipe flow with large losses)
(!For a static solid under shear)
(!For any compressible shock wave)

{{E}}
<br>

{{MC}}

'''What does the Reynolds number primarily compare?'''
(Inertial effects with viscous effects)
(!Gravity effects with surface tension effects)
(!Pressure effects with acoustic effects)
(!Thermal diffusion with electrical resistance)

{{E}}
<br>

{{MC}}

'''What is the Darcy friction factor for fully developed laminar flow in a circular pipe?'''
(Sixty four divided by Reynolds number)
(!Reynolds number divided by sixty four)
(!Relative roughness divided by Mach number)
(!Froude number squared)

{{E}}
<br>

{{MC}}

'''What commonly promotes boundary-layer separation on a surface?'''
(A strong adverse pressure gradient)
(!A perfectly uniform static pressure)
(!A vanishing fluid density)
(!A zero gravitational field)

{{E}}
<br>

{{MC}}

'''Which dimensionless number is most directly associated with compressibility and sound speed?'''
(Mach number)
(!Weber number)
(!Froude number)
(!Euler number)

{{E}}
<br>

{{MC}}

'''Which dimensionless number is central to gravity-dominated free-surface flow?'''
(Froude number)
(!Mach number)
(!Prandtl number)
(!Knudsen number)

{{E}}
<br>

{{MC}}

'''What is the main purpose of CFD verification?'''
(To check numerical solution accuracy for the chosen equations)
(!To prove that every physical assumption is exact)
(!To eliminate the need for experimental evidence)
(!To guarantee that turbulence is fully resolved)

{{E}}
<br>

{{BR}}
== Memory Game ==

<div class="memo-quiz">
{|
|-
| Reynolds number || Ratio indicating the relative importance of inertia and viscosity
|-
| Boundary layer || Near-wall region where viscous velocity gradients are important
|-
| Cavitation || Formation of vapor cavities when local absolute pressure becomes sufficiently low
|-
| Vorticity || Curl of the velocity field that measures local fluid rotation
|-
| Froude number || Ratio comparing inertial and gravity effects in free-surface flow
|-
| Control volume || Selected region of space used to formulate integral conservation laws
|-
| Head loss || Mechanical energy per unit weight dissipated by irreversible flow processes
|-
| No-slip condition || Requirement that fluid at a stationary solid wall has zero relative velocity
|}
{{E}}
<br>

{{BR}}
== Drag and Drop ==

<div class="lueckentext-quiz">

{| class="wikitable"
! Match the correct terms.
! Topic
|-
| '''Conservation of mass'''
| Connects net mass flux to accumulation
|-
| '''Linear momentum balance'''
| Relates external forces to momentum change
|-
| '''Mechanical energy equation'''
| Relates pressure velocity elevation work and loss terms
|-
| '''Dimensional analysis'''
| Organizes governing variables into dimensionless groups
|-
| '''Boundary layer analysis'''
| Resolves concentrated viscous effects near a solid wall
|}
{{E}}

<br>
<br />

{{BR}}
== Crossword Puzzle ==

<div class="kreuzwort-quiz">
{|
|-
| Viscosity || Which fluid property measures resistance to shear deformation in a Newtonian constitutive law?
|-
| Continuity || Which governing equation expresses conservation of mass in fluid flow?
|-
| Vorticity || What one-word quantity is the curl of the velocity field?
|-
| Turbulence || What flow regime features irregular three-dimensional fluctuations across many scales?
|-
| Cavitation || What phenomenon forms vapor cavities when local absolute pressure becomes sufficiently low?
|-
| Streamline || What curve is tangent to the instantaneous velocity field at every point?
|}
{{E}}
<br>

{{BR}}
== LearningApps ==

<iframe> https://learningapps.org/index.php?s=Fluid+Mechanics </iframe>

{{BR}}
== Cloze Text ==

<quiz display=simple>
{'''Complete the text.'''<br>
|type="{}"}
Engineering fluid analysis commonly begins with the { continuum hypothesis } so that smooth fields can represent matter. A Newtonian fluid relates shear stress to velocity gradient through dynamic { viscosity }. In a static liquid of nearly constant density, pressure rises with { depth }. Conservation of mass is expressed differentially by the { continuity equation }. The acceleration following a moving fluid particle is obtained with the { material derivative }. Bernoulli's equation is a form of mechanical-energy conservation under restrictive { assumptions }. The dimensionless group comparing inertia with viscosity is the { Reynolds number }. Fully developed laminar flow in a circular pipe has a { parabolic } velocity profile. Major pipe loss is commonly modeled with the Darcy { friction factor }. Near a solid wall, viscous effects form a { boundary layer }. A strong adverse pressure gradient can cause flow { separation }. In free-surface flow, the ratio comparing inertia with gravity is the { Froude number }.
</quiz>

<br>

{{BR}}
= Open-Ended Tasks =

{{BR}}
=== Easy ===
# [[English:Pressure measurement|Pressure measurement]]: Build or use a simple water manometer, measure several pressure differences, photograph the setup, and explain how the height difference becomes a pressure difference.
# [[English:Flow visualization|Flow visualization]]: Create a short video that uses dye, bubbles, or neutrally buoyant tracers in water to distinguish streamline-like motion from mixing, and annotate the observed features.
# [[English:Dimensional analysis|Dimensional analysis]]: Choose a familiar flow device such as a straw, faucet, fan, or nozzle and produce a one-page dimensional audit of all variables, SI units, and plausible dimensionless groups.
# [[English:Bernoulli's principle|Bernoulli's principle]]: Draw a technically accurate diagram of a Venturi meter and write a short explanation of which assumptions are needed before pressure measurements can be converted into flow speed.

{{BR}}
=== Standard ===
# [[English:Reynolds number|Reynolds number]]: Conduct a safe small-scale tube-flow experiment with a visible tracer, estimate Reynolds number across several flow rates, and compare the observed transition behavior with your prediction.
# [[English:Pipe flow|Pipe flow]]: Measure or obtain pressure-drop data for flow through a straight pipe, calculate the Darcy friction factor, and compare your result with the laminar relation or the Moody chart as appropriate.
# [[English:Boundary layer|Boundary layer]]: Use tufts, smoke in an approved laboratory, or a numerical visualization to study flow around a simple body, then identify attachment, possible separation, and wake development in an annotated report.
# [[English:Fluid mechanics interview|Fluid mechanics interview]]: Interview an engineer, laboratory technician, researcher, or practitioner who works with pumps, ventilation, hydraulics, aerodynamics, process flow, or CFD and summarize how conservation laws and uncertainty affect real decisions.

{{BR}}
=== Advanced ===
# [[English:Computational fluid dynamics|Computational fluid dynamics]]: Simulate a two-dimensional laminar flow case such as channel flow or flow past a cylinder, perform a mesh-refinement study, and distinguish numerical error from modeling assumptions.
# [[English:Hydraulic jump|Hydraulic jump]]: Measure upstream and downstream depths in a laboratory flume or carefully controlled shallow water setup, calculate Froude numbers, and compare the measured depth change with a momentum-based prediction.
# [[English:Similarity theory|Similarity theory]]: Design a scaled model study for a spillway, vehicle, pipe system, or wind-sensitive structure, identify which dimensionless groups must be matched, and justify any similarity compromises.
# [[English:Open educational resources|Open educational resources]]: Produce a five-minute explanatory video or illustrated mini-article on one advanced fluid-mechanics concept, include a worked example, cite reliable sources, and release your own contribution under an open license.

{{:Open Task - Create a MOOC}}

{{BR}}
= Learning Assessment =

# [[English:Control-volume analysis|Control-volume analysis]]: Analyze a jet, nozzle, or pipe bend by selecting a defensible control volume, applying mass and momentum balances, and explaining how each force term enters the result.
# [[English:Energy-loss diagnosis|Energy-loss diagnosis]]: Given pressure, elevation, pipe, pump, and flow-rate data for a real or hypothetical system, determine the dominant loss mechanisms and recommend one design change supported by calculations.
# [[English:Similarity and scaling|Similarity and scaling]]: Evaluate a proposed laboratory scale model and decide whether Reynolds, Froude, Mach, or Weber similarity is most important, then explain the consequences of groups that cannot be matched.
# [[English:Boundary-layer reasoning|Boundary-layer reasoning]]: Interpret a surface-pressure distribution and near-wall velocity profiles to predict where separation is likely and how a geometry change might alter drag or lift.
# [[English:Experimental uncertainty|Experimental uncertainty]]: Use repeated flow measurements to estimate uncertainty, propagate it into a derived quantity such as discharge coefficient or friction factor, and judge whether theory and experiment agree within uncertainty.
# [[English:CFD credibility|CFD credibility]]: Review a sample CFD result and write a short technical audit covering governing equations, boundary conditions, mesh sensitivity, convergence, verification, validation, and whether the result is adequate for the stated engineering decision.

<br>
<br>

{{BR}}
= Evidence of Learning =

# '''Knowledge evidence''': You can explain the assumptions and physical meaning behind hydrostatics, continuity, momentum balance, Bernoulli's equation, viscous flow, boundary layers, turbulence, and dimensional similarity.
# '''Mathematical evidence''': You can derive or apply integral and differential conservation equations with consistent signs, units, coordinates, and boundary conditions.
# '''Experimental evidence''': You can design measurements, calibrate or describe instruments, quantify uncertainty, and compare observed behavior with a physically justified model.
# '''Computational evidence''': You can formulate a CFD problem, document discretization and convergence choices, and distinguish verification from validation.
# '''Product evidence''': Your portfolio includes worked analyses, annotated diagrams, laboratory data, a visualization or video, and at least one technically argued design recommendation.
# '''Transfer evidence''': You can recognize which fluid-mechanics principles govern a new engineering system and defend suitable approximations using scaling, dimensionless groups, and order-of-magnitude checks.

<br>
<br>

{{BR}}
= OERs on the Topic =

The English Wikipedia article on [[English:Fluid mechanics|Fluid mechanics]] provides an openly accessible overview and links to related concepts, historical developments, and specialized subfields.

<iframe> https://en.m.wikipedia.org/wiki/Fluid_mechanics </iframe>

<br>

{{BR}}
= Linked Learning Areas =

{| align=center
{{:D-Tab}}
'''[[English:Fluid Mechanics|Fluid Mechanics]]'''
# [[English:Fluid statics|Fluid statics]]
# [[English:Fluid dynamics|Fluid dynamics]]
# [[English:Continuity equation|Continuity equation]]
# [[English:Navier–Stokes equations|Navier–Stokes equations]]
# [[English:Bernoulli's principle|Bernoulli's principle]]
# [[English:Reynolds number|Reynolds number]]
# [[English:Dimensional analysis|Dimensional analysis]]
# [[English:Pipe flow|Pipe flow]]
# [[English:Boundary layer|Boundary layer]]
# [[English:Turbulence|Turbulence]]
# [[English:Open-channel flow|Open-channel flow]]
# [[English:Computational fluid dynamics|Computational fluid dynamics]]
|}

Fluid mechanics connects especially strongly with [[English:Mechanical engineering|mechanical engineering]], [[English:Civil engineering|civil engineering]], [[English:Chemical engineering|chemical engineering]], [[English:Aerospace engineering|aerospace engineering]], [[English:Environmental engineering|environmental engineering]], [[English:Physics|physics]], [[English:Applied mathematics|applied mathematics]], [[English:Thermodynamics|thermodynamics]], [[English:Heat transfer|heat transfer]], and [[English:Numerical analysis|numerical analysis]].

{{BR}}
= aiMOOC Projects =
[[Category:English]]
[[Category:Fluid Mechanics]]
[[Category:Higher Education]]
[[Category:Engineering]]
[[Category:Mechanical Engineering]]
[[Category:Civil Engineering]]
[[Category:Physics]]
[[Category:Fluid Dynamics]]
[[Category:AI_MOOC]]
[[Category:GPT aiMOOC]]
{{MT}}

English:Fluid Mechanics - Versionsgeschichte

Glanz: aiMOOC über GPT aiMOOC Action erstellt